1 / 16

LDX implementation

LDX implementation. Progress on action items Progress on installation New topics. BIS beam interlock system. Requirements : Cable length between CIBU and double current loop generation shall not exceed 4 m for electrical signal integrity reason. Experiments to define exact location of CIBU.

kostya
Download Presentation

LDX implementation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. LDX implementation • Progress on action items • Progress on installation • New topics LEADE/ D. Swoboda

  2. BIS beam interlock system • Requirements: • Cable length between CIBU and double current loop generation shall not exceed 4 m for electrical signal integrity reason. • Experiments to define exact location of CIBU. • Experiments to assure that interlock signal integrity at arrival on the CIBU is guaranteed. The requirements are specified in [1] Chapter 5. • The cable length between patch-panel and the associated CIBU must be given to AB/CO to check the electrical compatibility for the cables from BIC to CIBU. • CIBU needs to be connected to safe power source. • Actions: • B. Puccio will supply proposal for procedure of periodic IL chain tests. • CIBU implementation: • One patch-panel which is installed by AB/CO in the dedicated rack is foreseen between the CIBU and the BIC crate) • ATLAS: all CIBUs (ATLAS, movable devices, magnet,) will be installed in rack Y4.02-03.A1 which is equipped with UPS. Electronics to be installed in rack next to it. No patch-panels required. • LHCf: CIBU will be installed in USA15 rack Y.26-05.A1. Patch-panel required in Y4.02-03.A1. • ALICE: CIBU ALICE will be installed in rack UX25/C28. Patch-panels required for Magnet, ALICE ZDC. • CMS: all CIBUs will not be directly cabled but the connection from BIC will be terminated in patch-panels. The cabling between patch-panel and CIBU will be executed by CMS/Totem following the prescription from AB-CO. • LHCb: all CIBUs will not be directly cabled but the connection from BIC will be terminated in patch-panels. The cabling between patch-panel and CIBU will be executed by LHCb following the prescription from AB-CO. LEADE/ D. Swoboda

  3. BIS cabling in Experiments LEADE/ D. Swoboda

  4. TTC [1]http://ttc-upgrade.web.cern.ch/ttc-upgrade/New_system/TTCupgrade_System_Test_report.pdf The acceptance tests of the digital Tx and Rx were done in collaboration with AB/RF end of November 2006 Production quantities RF2TTC end of May, Fanout end of May, Tx and Rx probably in July (these ones are in hands of AB/RF) LEADE/ D. Swoboda

  5. BST LEADE/ D. Swoboda

  6. GMT available configurations(Supply includes CTR card, Driver, Diagnosis S/W) • GMT specific parameters • UTC time stamp (25 nsec resolution, < 1μsec accuracy) • Safe beam parameters • Beam mode • maintenance issues • version maintenance (driver down load) – responsibility of AB-CO, • 24 h piquet support only available for full AB-CO systems. LEADE/ D. Swoboda

  7. BPTX [2] Proposal for a Beam Phase and Intensity Monitor (LHCb 2006-055) LEADE/ D. Swoboda

  8. BIC • CIBU delivery to experiments expected now. • LHC interlock system test provisionally planned for summer. • If beam permit flag generation not yet operational  experiment need to simulate the signal to be sent to the CIBU. • Test requires 2 signals to be changed independently. LEADE/ D. Swoboda

  9. cable end point in experiments CMS General Comment Optical fibres (TTC, BST) installed by TS-EL-OF generally require a patch panel to terminate them. This cannot go in S1E03, but could find place in S1E09? The installation of these same fibres have been requested of TS-EL-OF by Sophie Baron (PH/ESS). [1] TTC Fibres for CMS go directly via the Machine Tunnel from Point 4 to Point 5, they do not pass the CCC/R as for the others [2] BST Fibres are two per ring [3] Original arrangement between B. Puccio (AB/CO) and E. Sbrissa (PH/DT1) was that E. Sbrissa would install the correct cable between the BIC and his CIBU. E. Sbrissa is ok with someone doing it for him, however, and will supply the final rack location ASAP. LEADE/ D. Swoboda

  10. data exchange H/W in experiments [1] Termination through 1U pp with 12 Lemo or Canon 9p. [2] Proposal for a Beam Phase and Intensity Monitor (LHCb 2006-055) LEADE/ D. Swoboda

  11. cost of data exchange systems for experiments No change since last update [1] Computed prices including the price of the transmitters from SR4 to experiments LEADE/ D. Swoboda

  12. Cabling schedule [1] Cable type CMC50 replaced by CMA50. LEADE/ D. Swoboda

  13. Update (JC Guillaume 20/03/07) LEADE/ D. Swoboda

  14. Low β triplet WPS LEADE/ D. Swoboda

  15. Low β triplet monitoring LEADE/ D. Swoboda

  16. Low β triplet monitoring detail LEADE/ D. Swoboda

More Related