1 / 13

LHS Tech/Design 2 Lighting Project

Objective: To analyze the cost of lighting and ways of possibly lowering that price. LHS Tech/Design 2 Lighting Project. Carena Pineda, Ricky Edwards, Alex Flores, Kevin Coleman, Connor King, Isaac Lynn, Kian Paraiso Mr. Novotny 2008. What we need.

Download Presentation

LHS Tech/Design 2 Lighting Project

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Objective: To analyze the cost of lighting and ways of possibly lowering that price. LHS Tech/Design 2Lighting Project Carena Pineda, Ricky Edwards, Alex Flores, Kevin Coleman, Connor King, Isaac Lynn, KianParaiso Mr. Novotny 2008

  2. What we need • Research 3 aspects of lighting in a classroom • How much light is in the room and is needed (color/intensity/distribution) • Efficiency of various lights • Occupancy time of the room • Lutron Greenovation products installed • Motion sensor • Light meter by windows • Dimming/Balancing capability • Calculations/ Expenses/ Savings • Benefits • Costs

  3. 56% of all electrical use in schools is for Lighting

  4. Different Types of Bulbs Amps times volts (110)= How many watts being used

  5. Research • A light sensor is used to measure the amount of light in an area • Light can be measured in foot-candles • As the distance from the source of light increases, the amount of light in an area decreases. • The brightness of a light depends on the color of the light. • We made a floor plan and measured the amount of light in each 4x4 tile with a light sensor to determine how much light is in the lab. • Amount of light varied by 75 ft. candles throughout the room (75-150 ft. candles)

  6. Research • The occupancy of a room can be determined in many ways; a sign in sheet, a video camera, or a motion sensor. • The sign in sheet showed that room use varied everyday and that responsibility for signing in was limited. • The cost of kilowatt of electricity is 14 cents. • During the course of a day in the room, 15,600 watts are consumed in a 12 hour day. • It costs $2.19/day to light the room ($394.20 for 180 days) • If the lights in this room are reduced during non-occupancy, yearly costs would be reduced from $394.20 to $270.00.

  7. Statistics There are approximately 5,200 fluorescent bulbs in LHS. * 2,200 bulbs in classrooms * 1,000 in hallways * 2,000 in various locations around the school, including the music wing, cafeteria, library, offices, etc…

  8. Statistics • The school consumes 1,983 KwH per day for lighting, or • $278 per day to light the school, or • $49,986 for 180 days of school.

  9. It costs $278 per day to light the school It costs about $49,986 per year (180 days) Right now, 4,200 bulbs are on for 12 hours a day, 1,000 bulbs are on for 18 hours a day If hallway lights are reduced from 18 hours to 12 hours, the school would save $4,381 per year If we turn off the lights while they aren’t in use, the classrooms from 12 hours to 8 hours and the other 2,000 lights around the school from 12 hours to 10 hours, the school would save a total of $12,354 Comparison

  10. Overall Design • Motion Sensor to detect movement/lack of movement in class – automatically turn off lights after ten minutes of no activity • Dimmer Controls to turn lights down when not needed or bright outside • Programmable Ballasts to balance light output across the room • Light Sensor to determine when sunlight is present and lights can be dimmed

More Related