1 / 15

Lecture 4 ( Assembly Language )

Lecture 4 ( Assembly Language ). Lecture Outline Introduction The FLAGS Register Overflow How instruction affect the flags. Introduction. One important feature that distinguishes a computer from other machines is the computer’s ability to make decisions.

lalasa
Download Presentation

Lecture 4 ( Assembly Language )

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Lecture 4 ( Assembly Language)

  2. Lecture Outline • Introduction • The FLAGS Register • Overflow • How instruction affect the flags

  3. Introduction • One important feature that distinguishes a computer from other • machines is the computer’s ability to make decisions. • Decision are made based on the current state of the processor. • In the 8086 processor, the processor state is implemented as nine • individual bits called flags. • Each decision made by the 8086 is based on the values of these • flags. • The flags are placed in the FLAGS register.

  4. The FLAGS Register • Two kinds of flags: • Status flags: reflect the result of an instruction executed by the • processor (ex. ZF ,PF ,SF ,OF) • Control Flag: enable or disable certain operations of the • processor (ex. If the IF “Interrupt Flag” is set to 0, • inputs from the keyboard are ignored by the • processor).

  5. The FLAGS Register 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 OF DF IF TF SF ZF AF PF CF • Status Flags • Carry Flag (CF) • Parity Flag (PF) • Auxiliary carry Flag (AF) • Zero Flag (ZF) • Sign Flag (SF) • Overflow Flag (OF) • Control Flags • Trap Flag (TF) • Interrupt Flag (IF) • Direction Flag (DF)

  6. The FLAGS Register - Status Flags • Carry Flag (CF): • CF = 1 if there is a carry out from the msb on addition. • CF = 1 if there is a borrow into the msb on subtraction. • CF = 0 otherwise. • CF is also affected by shift and rotate instructions. • Parity Flag (PF): • PF = 1 if the low byte of a result has an even number of one bits • PF = 0 if the low byte has odd parity • (ex. if a result is FFFE PF = 0).

  7. The FLAGS Register - Status Flags • Auxiliary carry Flag (AF): • AF = 1 if there is a carry out from bit 3 on addition. • AF = 1 if there is a borrow into bit 3 on subtraction. • AF = 0 otherwise. • AF is used in BCD operations. • Zero Flag (ZF): • ZF = 1 for a zero result. • ZF = 0 for nonzero result.

  8. The FLAGS Register - Status Flags • Sign Flag (SF): • SF = 1 if the msb of a result is 1. • (i.e. Negative if signed interpretation is used). • SF = 0 if the msb is 0. • Overflow Flag (OF): • OF = 1 if signed overflow occurred. • OF = 0 otherwise.

  9. Overflow • The phenomenon of overflow is associated with the fact that the • range of numbers that can be represented in a computer is limited. • If the result of an operation falls outside the range, overflow occurs • and the truncated result that is saved will be incorrect.

  10. How the Processor Determines that Overflow Occurred? Signed Overflow • On addition of numbers with the same sign, signed overflow occurs • when the sum has a different sign. • Subtraction of numbers with different signs is like adding numbers • of the same sign (ex. A - (-B) = A + B). Signed overflow occurs if • the result has a different sign than expected. • In addition of numbers with different signs, overflow is impossible. • Subtraction of numbers with the same sign cannot give overflow.

  11. How Instructions Affect the Flags • In general, each time the processor executes an instruction, the flags • are altered to reflect the result. • However, some instructions don’t affect any of the flags, affects • only some of them, or may leave them undefined. Instruction Affects flags MOV/XCHG none ADD/SUB all INC/DEC all except CF NEG all (CF = 1 unless result is 0, OF = 1 if word operand is 8000h or byte operand is 80h)

  12. How Instructions Affect the Flags Example: ADD AX, BX where AX contains FFFFh, BX contains FFFFh FFFFh +FFFFh 1FFFEh = 1111 1111 1111 1110b SF = 1 because the msb is 1. PF = 0 because there are 7 (odd number) of 1 bits in the low byte. ZF = 0 because the result is nonzero. CF = 1 because there is a carry out of the msb on addition. OF = 0 because the sign of the stored result is the same as that of the numbers being added.

  13. How Instructions Affect the Flags Example: ADD AL, BL where AL contains 80h, BL contains 80h 80h +80h 100h SF = 0 because the msb is 0. PF = 1 because all the bits in the result are zero. ZF = 1 because the result is 0. CF = 1 because there is a carry out of the msb on addition. OF = 1 because the numbers being added are both negative, but the result is 0.

  14. How Instructions Affect the Flags Example: SUB AX, BX where AX contains 8000h, BX contains 0001h 8000h - 0001h 7FFFh = 0111 1111 1111 1111b SF = 0 because the msb is 0. PF = 1 because there are 8 (even number) one bits in the low byte. ZF = 0 because the result is nonzero. CF = 0 because a smaller unsigned number is being subtracted from a larger one. OF = 1 because a positive number is being subtracted from a negative one (like adding two negatives), and the result is positive.

  15. How Instructions Affect the Flags Example: MOV AX, -5 None of the flags are affected by MOV.

More Related