1 / 46

ECOM 4314 Data Communications Fall September, 2010

ECOM 4314 Data Communications Fall September, 2010. Chapter 6 Outline. Frequency-Division Multiplexing Wavelength-Division Multiplexing Synchronous Time-Division Multiplexing Statistical Time-Division Multiplexing. Bandwidth utilization.

landis
Download Presentation

ECOM 4314 Data Communications Fall September, 2010

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ECOM 4314Data CommunicationsFall September, 2010

  2. Chapter 6 Outline • Frequency-Division Multiplexing • Wavelength-Division Multiplexing • Synchronous Time-Division Multiplexing • Statistical Time-Division Multiplexing Data Communication

  3. Bandwidth utilization Bandwidth utilization is the wise use of available bandwidth to achieve specific goals. Efficiency can be achieved by multiplexing; i.e., sharing of the bandwidth between multiple users. Data Communication

  4. Bandwidth utilization • Whenever the bandwidth of a medium linking two devices is greater than the bandwidth needs of the devices, the link can be shared. • Multiplexing is the set of techniques that allows the (simultaneous) transmission of multiple signals across a single data link. • As data and telecommunications use increases, so does traffic Data Communication

  5. Multiplexing Figure 6.1 Dividing a link into channels Data Communication

  6. Multiplexing Figure 6.2 Categories of multiplexing Data Communication

  7. Frequency Division Multiplexing (FDM) FDM is an analog multiplexing technique that combines analog signals. It uses the concept of modulation discussed in Ch 5. Data Communication

  8. FDM Figure 6.3 Frequency-division multiplexing (FDM) Data Communication

  9. FDM Figure 6.4 FDM process Data Communication

  10. FDM Figure 6.5 FDM demultiplexing example Data Communication

  11. Example Assume that a voice channel occupies a bandwidth of 4 kHz. We need to combine three voice channels into a link with a bandwidth of 12 kHz, from 20 to 32 kHz. Show the configuration, using the frequency domain. Assume there are no guard bands. Solution We shift (modulate) each of the three voice channels to a different bandwidth, as shown in Figure 6.6. We use the 20- to 24-kHz bandwidth for the first channel, the 24- to 28-kHz bandwidth for the second channel, and the 28- to 32-kHz bandwidth for the third one. Then we combine them as shown in Figure 6.6. Data Communication

  12. Example Data Communication

  13. Example Five channels, each with a 100-kHz bandwidth, are to be multiplexed together. What is the minimum bandwidth of the link if there is a need for a guard band of 10 kHz between the channels to prevent interference? Solution For five channels, we need at least four guard bands. This means that the required bandwidth is at least 5 × 100 + 4 × 10 = 540 kHz, as shown in Figure 6.7. Data Communication

  14. Example Data Communication

  15. Wavelength-division multiplexing WDM is an analog multiplexing technique to combine optical signals. Data Communication

  16. WDM Figure 6.10 Wavelength-division multiplexing (WDM) Data Communication

  17. Figure 6.11 Prisms in wavelength-division multiplexing and demultiplexing Data Communication

  18. Time Division Multiplexing (TDM) • TDM is a digital multiplexing technique for combining several low-rate digital channels into one high-rate one. • Instead of sharing banswidth as in FDM , TDM share time • TDM has two different schemes • Synchronous • Statistical Data Communication

  19. Figure 6.12 Time Division Multiplexing (TDM) Data Communication

  20. Synchronous TDM • The data flow of each input connection is divided into units, where each input occupies one input time slot. • A unit can one bit , one charcter, one block Data Communication

  21. Synchronous TDM Figure 6.13 Synchronous time-division multiplexing Data Communication

  22. Synchronous TDM Data Communication

  23. Interleaving • The process of taking a group of bits from each input line for multiplexing is called interleaving. • We interleave bits (1 - n) from each input onto one output. Data Communication

  24. Interleaving Figure 6.15 Interleaving Data Communication

  25. Data Rate Management • Not all input links maybe have the same data rate. • Some links maybe slower. There maybe several different input link speeds • There are three strategies that can be used to overcome the data rate mismatch: multilevel, multislot and pulse stuffing Data Communication

  26. Data Rate Management • Multilevel: used when the data rate of the input links are multiples of each other. • Multislot: used when there is a GCD between the data rates. The higher bit rate channels are allocated more slots per frame, and the output frame rate is a multiple of each input link. • Pulse Stuffing: used when there is no GCD between the links. The slowest speed link will be brought up to the speed of the other links by bit insertion, this is called pulse stuffing. Data Communication

  27. Multilevel multiplexing Figure 6.19 Multilevel multiplexing Data Communication

  28. Multiple-slot multiplexing Figure 6.20 Multiple-slot multiplexing Data Communication

  29. Pulse stuffing Figure 6.21 Pulse stuffing Data Communication

  30. Synchronization • To ensure that the receiver correctly reads the incoming bits, i.e., knows the incoming bit boundaries to interpret a “1” and a “0”, a known bit pattern is used between the frames. • The receiver looks for the anticipated bit and starts counting bits till the end of the frame. • Then it starts over again with the reception of another known bit. • These bits (or bit patterns) are called synchronization bit(s). • They are part of the overhead of transmission. Data Communication

  31. Synchronization Figure 6.22 Framing bits Data Communication

  32. Figure 6.23 Digital hierarchy Data Communication

  33. T-1 line for multiplexing Figure 6.24 T-1 line for multiplexing telephone lines Data Communication

  34. Inefficient use of Bandwidth • Sometimes an input link may have no data to transmit. • When that happens, one or more slots on the output link will go unused. • That is wasteful of bandwidth Data Communication

  35. Empty slots Figure 6.18 Empty slots Data Communication

  36. TDM slot comparison Figure 6.26 TDM slot comparison Data Communication

  37. SPREAD SPECTRUM • In spread spectrum (SS), we combine signals from different sources to fit into a larger bandwidth, but our goals are to prevent eavesdropping and jamming. • To achieve these goals, spread spectrum techniques add redundancy. • Frequency Hopping Spread Spectrum (FHSS) • Direct Sequence Spread Spectrum (DSSS) Data Communication

  38. Spread Spectrum • A signal that occupies a bandwidth of B, is spread out to occupy a bandwidth of Bss • All signals are spread to occupy the same bandwidth Bss • Signals are spread with different codes so that they can be separated at the receivers. • Signals can be spread in the frequency domain or in the time domain. Data Communication

  39. Spread Spectrum Figure 6.27 Spread spectrum Data Communication

  40. Frequency hopping spread spectrum (FHSS) Data Communication

  41. Frequency selection in FHSS Figure 6.29 Frequency selection in FHSS Data Communication

  42. Figure 6.30 FHSS cycles Data Communication

  43. Direct Sequence Spread Spectrum Figure 6.32 DSSS Data Communication

  44. DSSS Figure 6.33 DSSS example Data Communication

  45. References • Ayman, Maliha, “Data Communication Lectures”, IUG. • BehrouzA. Forouzan , “Data Communications and Networking”, 4rdEdition, Chapter6, 2007 Data Communication

  46. Thanks Data Communication

More Related