1 / 36

Textbook and Syllabus

Semiconductor Device Physics. Textbook and Syllabus. Textbook: “Semiconductor Device Fundamentals”, Robert F. Pierret, International Edition, Addison Wesley, 1996. Syllabus: Chapter 1: Semiconductors: A General Introduction Chapter 2: Carrier Modeling Chapter 3: Carrier Action

lavi
Download Presentation

Textbook and Syllabus

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Semiconductor Device Physics Textbook and Syllabus Textbook: “Semiconductor Device Fundamentals”, Robert F. Pierret, International Edition, Addison Wesley, 1996. Syllabus: Chapter 1: Semiconductors: A General Introduction Chapter 2: Carrier Modeling Chapter 3: Carrier Action Chapter 5: pn Junction Electrostatics Chapter 6: pn Junction Diode: I–V Characteristics Chapter 7: pn Junction Diode: Small-Signal Admittance Chapter 8: pn Junction Diode: Transient Response Chapter 14: MS Contacts and Schottky Diodes Chapter 9: Optoelectronic Diodes Chapter 10: BJT Fundamentals Chapter 11: BJT Static Characteristics Chapter 12: BJT Dynamic Response Modeling

  2. Grade Policy Semiconductor Device Physics Final Grade = 15% Homework + 15% Quizzes + 30% Midterm Exam + 40% Final Exam + Extra Points • Homeworks will be given in fairly regular basis. The average of homework grades contributes 10% of final grade. Tests will be given to validate the submitted homeworks. • Homeworks are to be written on A4 papers, otherwise they will not be graded. • Homeworks must be submitted on time, one day before the schedule of the lecture. Late submission will be penalized by point deduction of –10·n, where n is the total number of lateness made. • There will be 3 quizzes. Only the best 2 will be counted. The average of quiz grades contributes 20% of final grade. • The maximum lateness in coming to class is 25 minutes, otherwise attendance will not be counted.

  3. Grade Policy Semiconductor Device Physics Semiconductor Device PhysicsHomework 2Ito Chen00920170000821 March 2021D6.2. Answer: . . . . . . . . • Heading of Homework Papers (Required) • Midterm and final exams follow the schedule released by AAB (Academic Administration Bureau). • Make up of quizzes must be held within one week after the schedule of the respective quiz. • Make up for mid exam and final exam must be requested directly to AAB.

  4. Semiconductor Device Physics Grade Policy • In order to maintain the integrity, the score of a make up quiz or exam can be multiplied by 0.9 (i.e., the maximum score for a make up will be 90). • Extra points will be given every time you solve a problem in front of the class or answer a question. You will earn 1 or 2 points. • Lecture slides can be copied during class session. The updated version will be available on the lecture homepage around 1 day after class schedule. Please check regularly. http://zitompul.wordpress.com • The use of internet for any purpose during class sessions is strictly forbidden. • You are expected to write a note along the lectures to record your own conclusions or materials which are not covered by the lecture slides.

  5. Semiconductor Device Physics Greek Alphabet • new • zz-eye • pie • taw • fie • k-eye • sigh • mew

  6. Semiconductor Device Physics Chapter 1 Semiconductors: A General Introduction

  7. Chapter 1 Semiconductors: A General Introduction What is a Semiconductor? • Low resistivity  “conductor” • High resistivity  “insulator” • Intermediate resistivity  “semiconductor” • The conductivity (and at the same time the resistivity) of semiconductors lie between that of conductors and insulators.

  8. Chapter 1 Semiconductors: A General Introduction No recognizable long-range order Entire solid is made up of atoms in an orderly three- dimensional array Completely ordered in segments What is a Semiconductor? • Semiconductors are some of the purest solid materials in existence, because any trace of impurity atoms called “dopants” can change the electrical properties of semiconductors drastically. • Unintentional impurity level: 1 impurity atom per 109 semiconductor atom. • Intentional impurity ranging from 1 per 108 to 1 per 103. polycrystalline amorphous crystalline • Most devices fabricated today employ crystalline semiconductors.

  9. Chapter 1 Semiconductors: A General Introduction Semiconductor Materials Elemental:Si, Ge, C Compound: IV-IV SiC III-V GaAs, GaN II-VI CdSe Alloy: Si1-xGex AlxGa1-xAs As : ArsenicCd : CadmiumSe : SeleniumGa : Gallium

  10. Chapter 1 Semiconductors: A General Introduction From Hydrogen to Silicon

  11. Chapter 1 Semiconductors: A General Introduction The Silicon Atom • 14 electrons occupying the first 3 energy levels: • 1s, 2s, 2p orbitals are filled by 10 electrons. • 3s, 3p orbitals filled by 4 electrons. • To minimize the overall energy, the 3s and 3p orbitals hybridize to form four tetrahedral 3sp orbital. • Each has one electron and is capable of forming a bond with a neighboring atom.

  12. Chapter 1 Semiconductors: A General Introduction The Si Crystal • Each Si atom has 4 nearest neighbors. • Atom lattice constant(length of the unit cell side) • a = 5.431A, 1A=10–10m ° ° • Each cell contains: 8 corner atoms 6 face atoms 4 interior atoms a “Diamond Lattice”

  13. Chapter 1 Semiconductors: A General Introduction How Many Silicon Atoms per cm–3? • Number of atoms in a unit cell: • 4 atoms completely inside cell • Each of the 8 atoms on corners are shared among 8 cells  count as 1 atom inside cell • Each of the 6 atoms on the faces are shared among 2 cells  count as 3 atoms inside cell • Total number inside the cell = 4 + 1 + 3 = 8 • Cell volume = (.543 nm)3 = 1.6 x 10–22cm3 • Density of silicon atom • = (8 atoms) / (cell volume) • = 5 × 1022 atoms/cm3 • What is density of silicon in g/cm3?

  14. Chapter 1 Semiconductors: A General Introduction Compound Semiconductors • “Zincblende” structure • III-V compound semiconductors: GaAs, GaP, GaN, etc.

  15. Chapter 1 Semiconductors: A General Introduction Crystallographic Notation Miller Indices h: inverse x-intercept of plane k: inverse y-intercept of plane l: inverse z-intercept of plane (h, k and l are reduced to 3 integers having the same ratio.)

  16. Chapter 1 Semiconductors: A General Introduction Crystallographic Planes _ (632) plane (001) plane (221) plane

  17. Chapter 1 Semiconductors: A General Introduction Crystallographic Planes

  18. Chapter 1 Semiconductors: A General Introduction Crystallographic Planes of Si Wafers • Silicon wafers are usually cut along a {100} plane with a flat or notch to orient the wafer during integrated-circuit fabrication. • The facing surface is polished and etched yielding mirror-like finish.

  19. Chapter 1 Semiconductors: A General Introduction Crystal Growth Until Device Fabrication

  20. Chapter 1 Semiconductors: A General Introduction Unit cell: View in <110> direction View in <100> direction Crystallographic Planes of Si View in <111> direction

  21. Chapter 2 Carrier Modeling

  22. Chapter 2 Carrier Modeling Electronic Properties of Si • Silicon is a semiconductor material. • Pure Si has a relatively high electrical resistivity at room temperature. • There are 2 types of mobile charge-carriers in Si: • Conduction electrons are negatively charged, e=–1.602 10–19 C • Holes are positively charged, p=+1.602  10–19C • The concentration (number of atom/cm3) of conduction electrons & holes in a semiconductor can be influenced in several ways: • Adding special impurity atoms (dopants) • Applying an electric field • Changing the temperature • Irradiation

  23. Chapter 2 Carrier Modeling Si Si Si Si Si Si Si Si Si Bond Model of Electrons and Holes • 2-D Representation Hole • When an electron breaks loose and becomes a conduction electron, then a hole is created. Conductionelectron

  24. Chapter 2 Carrier Modeling What is a Hole? • A hole is a positive charge associated with a half-filled covalent bond. • A hole is treated as a positively charged mobile particle in the semiconductor.

  25. Chapter 2 Carrier Modeling Conduction Electron and Hole of Pure Si • Covalent (shared e–) bonds exists between Si atoms in a crystal. • Since the e– are loosely bound, some will be free at any T, creating hole-electron pairs. ni≈ 1010 cm–3 at room temperature ni= intrinsic carrier concentration

  26. Chapter 2 Carrier Modeling Si: From Atom to Crystal Energy states (in Si atom) Energy bands (in Si crystal) • The highest mostly-filled band is the valence band. • The lowest mostly-empty band is the conduction band.

  27. Chapter 2 Carrier Modeling Energy Band Diagram Energy Band Diagram Ec EG, band gap energy Electron energy Ev • For Silicon at 300 K, EG = 1.12 eV • 1 eV = 1.6 x 10–19 J • Simplified version of energy band model, indicating: • Lowest possible conduction band energy (Ec) • Highest possible valence band energy (Ev) • Ec and Ev are separated by the band gap energy EG.

  28. Chapter 2 Carrier Modeling Measuring Band Gap Energy • EGcan be determined from the minimum energy (hn) of photons that can be absorbed by the semiconductor. • This amount of energy equals the energy required to move a single electron from valence band to conduction band. Electron Ec Photon photon energy: hn= EG Ev Hole Band gap energies

  29. Chapter 2 Carrier Modeling Carriers • Completely filled or empty bands do not allow current flow, because no carriers available. • Broken covalent bonds produce carriers (electrons and holes) and make current flow possible. • The excited electron moves from valence band to conduction band. • Conduction band is not completely empty anymore. • Valence band is not completely filled anymore.

  30. Chapter 2 Carrier Modeling E v E c Band Gap and Material Classification E c = E ~8 eV G E c = E 1.12 eV E G c E E E v v v Metal Si SiO2 • Insulators have large band gap EG. • Semiconductors have relatively small band gap EG. • Metals have very narrow band gap EG . • Even, in some casesconduction band is partially filled,Ev > Ec.

  31. Chapter 2 Carrier Modeling Carrier Numbers in Intrinsic Material • More new notations are presented now: • n : number of electrons/cm3 • p : number of holes/cm3 • ni: intrinsic carrier concentration • In a pure semiconductor, n = p = ni. • At room temperature, • ni= 2  106/cm3 in GaAsni= 1  1010 /cm3 in Si ni= 2  1013 /cm3 in Ge

  32. Semiconductor Device Physics Semester Schedule FCS 1 SDP 1 FCS 2 SDP 2 Rec 1

  33. Semiconductor Device Physics Semester Schedule SDP 3 FCS 3 SDP 4 FCS 4 Rec 2 FCS 5 SDP 5 Rec 3 FCS 6 Rec 4 SDP 6 Rec 5 Mid Mid Mid Mid

  34. Semiconductor Device Physics Semester Schedule Mid FCS 7 Rec 5 FCS 8 SDP 7 SDP 8 Rec 6 FCS 9 ? Rec 7 SDP 9 FCS 10 Rec 8

  35. Semiconductor Device Physics Semester Schedule SDP 10 FCS 11 Rec 9 FCS 12 SDP 11 Rec 10 Final Final Final Final Final

More Related