1 / 49

Arch lengthening and expansion

Arch lengthening and expansion. Arch lengthening. Increasing the arch length using distal movement of posterior teeth or proclination of incisors. Arch expansion. Management of “narrow” arches by increasing the upper or lower intercanine, inter-premolar and/or inter-molar width.

lel
Download Presentation

Arch lengthening and expansion

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Arch lengthening and expansion

  2. Arch lengthening • Increasing the arch length using distal movement of posterior teeth or proclination of incisors

  3. Arch expansion • Management of “narrow” arches by increasing the upper or lower intercanine, inter-premolar and/or inter-molar width

  4. Arch width changes with age • Male arches wider than female • Lower intercanine width increases up to change to permanent dentition • Upper and lower inter-molar width increases between ages 7 to 18 • Little change in premolar width after age 12

  5. Arch expansion

  6. Indications for arch expansion • Correction of posterior cross-bite • Elimination of a displacement • Avoiding creation of a cross-bite in cases needing distal movement of upper buccal segments • “V” shaped arch in a thumb-sucker

  7. Preparation for a bone graft in a cleft alveolus • Child with < 31mm of inter-molar width at age 7 yrs. Is unlikely to attain adequate arch dimensions through normal growth alone • Minimal crowding in upper arch (1-2 mm) • Interceptive orthodontics

  8. Mobilization of maxillary sutural system for orthopedic correction of early CL III • Initial preparation for functional jaw orthopedics (FR III), facial mask therapy and orthognathic surgery

  9. Clinical points • Expansion where posterior teeth are tilted lingually may be expected to be stable • Stable expansion of lower intercanine width unlikely unless canines lingually displaced • Expansion more likely to be stable in absence of extractions

  10. Correction of bilateral cross-bites is controversial: they may be left untreated if there is no displacement – the decision will depend on the pre-treatment inclination of the teeth and width of the underlying maxilla • Over-expansion is advisable in anticipation of some relapse • Increase in inter-molar width produces linear reduction in arch depth

  11. 1mm of arch expansion causes 0.3mm reduction in arch length ( equates to 0.6 mm space creation within the arch) • Claims that expansion improves nasal respiration equivocal

  12. relapse • Up to 40 % relapse has been found with all forms of active expansion • Occurs via lingual tilting of molars • Relapse less with fixed retainer than URA

  13. complications • Over expansion can cause scissors bite • Possible periodontal damage (equivocal evidence) • Increase in MMP angle and lower face height thus worsening AOB

  14. Appliances used for maxillary expansion

  15. URA • Design consists of an acrylic base plate which incorporates springs and retention clasps • Relies on patient to turn screw two quarter turns per week • Needs adequate seating and retention to produce expansion as the main effect is that of tipping • Coffin springs are less well tolerated and retained but can provide differential expansion laterally and anteroposteriorly • Coffin springs provide a continuous as opposed to interrupted orthodontic force

  16. Rapid maxillary expander • Design consists of an active plate, which incorporates a jackscrew which is attached to the teeth with wirework or acrylic • Patient turns a “Hyrax” screw once a day (0.2-0.5 mm/day) for 1-3 weeks (midline diastema develops quickly) • May produce more bodily movement than other appliances • There is evidence that mid palatal suture does split producing maxillary expansion

  17. RME contd. • Limitations are : • Amount of available bone for expansion • Controversial evidence: Î periodontal breakdown compared with URA • Care in choosing age for RME, due to Î resistance to maxillary base expansion which needs prolonged retention

  18. RME contd. • Bonded acrylic RME has occlusal coverage to reduce tipping and extrusion of molars • No significant differences between bonded and banded RME

  19. Surgically assisted RME • To overcome problems of expansion in non growing patients • Use buccal corticotomy or Le Forte 1 osteotomy and/or midpalatal splits in conjunction with “hyrax” screw • Claims: • Less periodontal support loss ------ unsubstantiated • Increase in nasal air flow ------ unsubstantiated

  20. Evidence : • Surgical and non-surgical techniques ; no difference in stability of expansion after one year • Non-surgical expansion allows sufficient expansion in adults • Problems : • Surgical procedure associated with morbidity and risks • Risk of nasal septum deviation

  21. Quad /tri /bi helix • Bi-helix used in mandibular arch in grossly narrowed or distorted arches, or to aid correction of a severe scissors bite • Some differential expansion of inter-molar width possible (however changes in patient’s original archform may not be stable) • Quad helix / tri helix fixed or removable, are useful in cleft cases • Activated by half a tooth’s width on either side • Provides some differential expansion and can derotate molars • May produce less dental tipping than URA • Unlike URA ,fixed quad helix is not reliable on patient’s compliance

  22. Fixed appliances • Limited amount of expansion possible with fixed appliance alone • Requires rectangular wire to prevent unfavorable dental tipping • Unilateral expansion possible but requires placement of buccal root torque on correct side to prevent tipping

  23. Functional appliances • Produce active expansion ( usually with either expansion screw or palatal arch) to prevent cross bite formation whilst a CL I relation is being obtained • Frankel appliance produces passive expansion only by removing influence of buccal tissues with buccal shields

  24. Arch lengthening

  25. indications • Non extraction cases with only very mild crowding (1-2 mm) • Any change in original arch form is likely to collapse, so lengthening must be kept to a minimum • Half unit CL II molar relationship in a non-extraction case • Correction of incisal relationship in CL III case by proclination if upper incisors • Regain space lost by early loss of deciduous teeth • Correction of retroclined mandibular incisors in CL II/2 cases,or CL II/1 cases with mandibular incisors trapped in palate

  26. Arch lengthening procedures • Distalisation of upper buccal segments • Distalisation of lower buccal segments • Proclination of upper or lower incisors

  27. Distalisation of upper buccal segments • HG with URA ( palatal finger springs to upper 6s, bite plane, HG to 6s tubes) • HG with no URA – HG to 6s tubes only. May take longer as there is no finger springs to prevent to prevent relapse during the day when HG is not worn • Distalising super elastic Nickel titanium coil springs • Magnets supported with CL II traction • Active palatal arch (TPA)

  28. Distalisation of lower buccal segments • Lip bumper ; not well tolerated • Removable appliance and HG

  29. Proclination of upper or lower incisors • URA ( split screw anteriorly, “Z” springs or “T” springs) • ELSA (expansion and labial segment alignment appliance); recurved spring or “wiper” arms to procline incisors • Labial crown torque ( rectangular wire in FA ) • Avoiding the use of “lace backs” in CL III maxillary incisors • Side effect of some FA is to procline the mandibular incisors if there is no incisal capping

More Related