1 / 26

Illumination and Filters

Illumination and Filters. Foundations of Microscopy Series Amanda Combs Advanced Instrumentation and Physics. Luminescence. Emission of light from an excited electronic state Requires the absorption of a photon There are 2 types of luminescence Fluorescence Phosphorescence.

liam
Download Presentation

Illumination and Filters

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Illumination and Filters Foundations of Microscopy Series Amanda Combs Advanced Instrumentation and Physics

  2. Luminescence • Emission of light from an excited electronic state • Requires the absorption of a photon • There are 2 types of luminescence • Fluorescence • Phosphorescence

  3. Absorption • Ephoton > Etransition • Absorption is followed immediately by vibrational relaxation • Occurs on the order of femtoseconds • Use of light pulses on the order of fs can result in the absorption of more than one photon

  4. Fluorescence • Emission from an excited singlet state • Efluorescence < Eabsorption due to vibrational relaxation • Spin of excited electron remains unchanged • S1S0 is an allowed transition • Has a lifetime on the order of nanoseconds

  5. Intersystem Crossing • The spin of the excited electron can ‘flip’ resulting in a move from the Singlet excited state to the Triplet excited state • A relaxation process, not an emissive transition

  6. Phosphorescence • Emission from an excited triplet state to the singlet ground state • T1S0 is not an allowed transition • Has a lifetime on the order of milliseconds to seconds due to forbidden nature of the transition • Ephosphorescence < Efluorescence

  7. Phosphorescence

  8. Fluorescence Spectra • Not a significant change in nuclear separation between ground state and first excited state • Overlap between ground state and excited state vibrational levels doesn’t change significantly upon excitation • Results in spectra that are nearly mirror reflections

  9. Fluorescence Spectra • Emission spectrum is independent of the excitation wavelength because of rapid vibrational relaxation • The spectral peak refers to the most probable transition • Excitation at peak wavelength is most efficient • No need to excite only at the peak

  10. Excited State Lifetime • Average amount of time a fluorophore spends in an excited state • Depends on the selection rules for the transition (allowed versus forbidden) back to the ground state • Depends on the number of possible relaxation pathways • The more non-radiative pathways possible, the shorter the fluorescence lifetime • t = 1/(kr+knr)

  11. Quantum Yield • A measure of the fluorescence efficiency • The ratio of the number of photons emitted to the total number of photons absorbed • Q=kr / (kr + knr) • Q1 as knr0 essentially every photon being absorbed is going towards fluorescence; no loss of fluorescence due to nonradiative decay

  12. Photobleaching • Permanent loss of luminescent ability • The triplet state can react to form new products • Due to the highly reactive nature of the triplet configuration as well as the long lifetime of the triplet excited state

  13. Detecting Fluorescence • The correct combination of filters is required to separate the fluorescence signal from the excitation light • There are 3 important types of filters to consider • Long pass / Short pass filters • Bandpass filters • Dichroic beamsplitters

  14. Bandpass Filters • Allows a well defined range of wavelengths to transmit • Other wavelengths are absorbed by the filter • Called BP535/40 • Bandpass filter • Centered at 535 nm • FWHM of 40 nm • Allows 515 nm-555 nm to transmit

  15. Short and Long Pass Filters • Allow wavelengths above (long pass) or below (short pass) a threshold value to transmit while the other wavelengths are absorbed • Long pass version called LP515 • Allows wavelengths greater than 515 nm to transmit (pictured) • Short pass version called KP515 • Allows wavelengths smaller than 515 nm to transmit (not pictured)

  16. Dichroic Beamsplitters • Beamsplitters transmit and reflect light intensity according to some parameter • Dichroics divide the light intensity according to color • Transmit a range of wavelengths and reflect a range of wavelengths • Plot shows only transmission • l < 505 nm are reflected off the optic at 90o and l > 505 nm are transmitted through the optic • Called FT505

  17. Choosing the Appropriate Filter Set • Alexa 488 for example • Excitation Filter: BP485/15 • Dichroic: FT505 • Emission Filter: BP530/40

  18. Fluorescence Filters in a Microscope • Filter cubes are used in a microscope • Excitation and emission filters can be either band pass or short/long pass • Dichroic beamsplitter reflects the excitation light but transmits the emission light

  19. Stimulated vs. Spontaneous Emission • Fluorescence is an example of spontaneous emission • Directionally random • Not dependent upon state populations • Lasing is a result of stimulated emission • Directional • Requires a stimulating field • Dependent upon the excited state population

  20. Continuous Wave Lasers • 4 level system provides continuous lasing • Can use electricity, light or a chemical reaction to pump • Requires a population inversion of the lasing transition • Excited state population is greater than ground state population • Narrow lasing bandwidth due to discrete lasing level • The cavity length takes stimulated emission to lasing • Requires the existence of a standing wave (L=nl/2)

  21. Pulsed Lasers • Pulses come from the interference of wavelengths from the range of transitions • The addition of more wavelengths (transitions) makes a shorter pulse in time • Tunability comes from changing cavity length to ‘choose’ a transition

  22. Illumination--Halogen Lamp • Used for bright field imaging • Smooth spectrum provides nearly uniform illumination • Not a good illumination source in the UV

  23. Illumination—HBO Lamp • Peaks can give good excitation for certain dyes • Must consider spectral structure to make quantitative conclusions

  24. Illumination—XBO Lamp • More uniform illumination than the HBO • May not excite as efficiently as HBO for some dyes

  25. Lamp Comparison with DAPI and FITC DAPI FITC

  26. Upcoming Seminars Schedule • Friday, October 13th: No seminar • Foundations of Microscopy: Winfried Wiegraebe, "Non-Linear Optics " Friday, October 20th from 1:00 - 2:00 p.m. in room 421 • Foundations of Image Processing: Christopher Wood, "De-Convolution " Friday, October 27th from 1:00 - 2:00 p.m. in room 421 • Foundations of Microscopy: Winfried Wiegraebe, "Fluorescence Lifetime Imaging Microscopy (FILM)“ Friday, November 3rd from 1:00 - 2:00 p.m. in room 421 • FCS User Club: Joseph Huff, "Characterization of Fluorescent Proteins by FCS " Friday, November 10th from 1:00 - 2:00 p.m. in room 421

More Related