1 / 17

Polarimeter build up and details

Polarimeter build up and details. Robert Lee. View 1. Removable plate. Material (Removable plate, leg supports and rail guide spacer): Aluminum Leg supports attached to removable plate using #8 fasteners. View 2. Material (Detector Leg and rail guide bottom): Aluminum

lindahl
Download Presentation

Polarimeter build up and details

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Polarimeter build up and details Robert Lee

  2. View 1 Removable plate • Material (Removable plate, leg supports and rail guide spacer): Aluminum • Leg supports attached to removable plate using #8 fasteners

  3. View 2 • Material (Detector Leg and rail guide bottom): Aluminum • Detector Legs attached to supports using #8 fasteners • Rail guide bottom tapped for #8-32 screw • Rail guide bottom attached to removable plate using #8-32 screws

  4. View 3 • Material (Short and Long rails): Aluminum • Material (Toothed rail): Steel • Long rail tapped for #4-40 screw • Toothed rail: Module 0.5 rack, pitch height 9.5 mm • Long rail, toothed rail and short rail put together using #4-40 screws

  5. View 4 • Material (rail guides): Aluminum

  6. View 5 • Material (standoffs) : Aluminum

  7. View 6 • Material (wire guard) : Aluminum • Wier guard attached to plate using #8 fasteners

  8. View 7 • Material (detector supports) : Aluminum • Detector supports attached to legs using #8 fasteners

  9. View 8 x2 x2 x2 x2 • Material (washers) : Teflon • Washers: Inner diameter 3.2 mm, outer diameter 7 mm, thickness 0.5 mm

  10. View 9 • Material (Bottom plate targets with slots) : Aluminum • Bottom plate attached to long rail using #8-32 screws • Detector: Micron Semi-Conductor model S3 1034 micron thick • Switches: Allectra: Model 363-switch-1 • Switches attached to rail guide using 2.5 mm fasteners • Detector attached to detector support using M3 teflon fasteners

  11. View 10 • Material (top plate target) : Aluminum • Top plate target attached to bottom plate target using #4-40 screws • Bottom plate target has tapped holes (for #4-40 screws) for holes matching those from the top plate target

  12. View 11 • Material (spacer) : Nylon

  13. View 12 • Material (stabalizers) : aluminum • Stabilizers attached to one another using #4-40 screws

  14. View 13 • Material (striker plate) : aluminum • Striker plate attached to bottom plate target using #6 nylon fasteners

  15. View 14 • Material (motor mount) : aluminum • motor mount attached to rail guides using #8 fasteners

  16. View 15 • Motor: Vacuum rated and radiation hardened Phytron stepper motor VSS 43.200.1.2-UHVG • Motor attached to motor mount using M 3.2 fasteners

  17. View 16 • Material (gear): Aluminum • Gear: Module 0.5, 22 teeth, outer diameter 12 mm, pitch diameter 11 mm, bore 5 mm, face width 3 mm, overall width 10 mm, hub diameter 10 mm

More Related