1 / 19

NOISE EXPOSURE SURVEY

NOISE EXPOSURE SURVEY. Either the Mine Operator Or MSHA Can conduct a noise exposure survey on You. This presentation describes MSHA’s method. A PERSONAL NOISE DOSIMETER IS USED TO DETERMINE YOUR FULL SHIFT NOISE EXPOSURE.

lucas-langley
Download Presentation

NOISE EXPOSURE SURVEY

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. NOISE EXPOSURESURVEY

  2. Either the Mine Operator Or MSHA Can conduct a noise exposure survey onYou. This presentation describes MSHA’s method.

  3. A PERSONAL NOISE DOSIMETER IS USED TO DETERMINEYOURFULL SHIFT NOISE EXPOSURE.

  4. The Dosimeter and its Field Calibratorwill be currently calibrated.

  5. This Annual Calibration is documented on the back or side of the dosimeter

  6. The Dosimeter is field calibrated before and after the survey.

  7. After field calibration a wind screen is attached to the microphone.

  8. The microphone is placed midway between your neck and shoulder in an upright position.

  9. The dosimeter and microphone cable should be located so as to minimize safety hazards and damage to the instrument.

  10. The dosimeter should be placed on the shoulder that is normally between the principal noise source and your ear.

  11. MICROPHONE ON THE SHOULDER CLOSEST THE TO NOISE SOURCE

  12. Throughout Your entire shift • You must wear the dosimeter. • You must not transfer the dosimeter when changing tasks. • You must ensure that the microphone remains properly positioned. • You must guard it from damage.

  13. Additionally, collaborative Sound Level readings maybe taken and recorded for each activity you perform during the work shiftin a manner that measures the different noise sources to which you ar exposed.

  14. The Sound Level Meter is likewise calibrated before and afteryourshift Measurements are taken at Arms Length within 1 to 2 feet of your Ear, with the microphone pointed upward. A dosimeter in the SLM mode may be substituted.

  15. At the End of Shift • Dosimeter is removed • The data is read-out or downloaded • Overall noise exposures (Dose %); • Time Weighted Average (Sound Level dBA); • Length of survey (hours, minutes, seconds); and • Maximum Sound Level (dBA)

  16. This Information is Used: • To determine if Action Level has been equaled or exceeded. • To determine if the Permissible Exposure Level has been exceeded. • To determine if the Dual Hearing Protection Level has been exceeded.

  17. Your children can whisper to you now, Don’t make them shout at you in the future

More Related