1 / 64

Lantech 2013 Solution

Lantech 2013 Solution . Presented by PM Dept. JAN,2013. Agenda. A Brief Introduction of Lantech New Products Advanced industrial grade high-speed redundancy solution ERPS Remote Management Demands Advance Security Management - SMART GRID - PTP.

maine
Download Presentation

Lantech 2013 Solution

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Lantech 2013 Solution Presented by PM Dept. JAN,2013

  2. Agenda • A Brief Introduction of Lantech New Products • Advanced industrial grade high-speed redundancy solution ERPS • Remote Management Demands • Advance SecurityManagement • - SMART GRID - PTP

  3. A Brief Introduction of Lantech New Products

  4. Product Strategy Backbone I(P)GS-5400-2P I(P)GS-5424 Distribution I(P)GS-5408 Edge I(P)ES-3408GSFP I(P)ES-3416GSFP I(P)ES-2208CA IES-2307CA I(P)ES-5408-PTP

  5. Benefits of Lantech New Product Line –IGS-5400-2P/3408/5408 Series • The industrial grade high-speed redundancy solution which is suitable for complex networking environment -- ERPS • Supporting IPV6 • Fulfill the demands of remote management for users • Easy use of built-in network management tools • Advance SecurityManagement • Unique IGMPfor surveillance • PTP for SMART GRID Marketing

  6. Comparing with 2208/2307 series

  7. Advanced Industrial Grade High-Speed Redundancy Solution-ERPS

  8. What’s ERPS • ERPS (Ethernet Ring Protection Switching) is the first industry standard (ITU-T G.8032) for Ethernet ring protection switching. • Provide the recover time of sub-50ms protection for Ethernet traffic in a ring topology. • Ensuring no loops formed at the Ethernet layer. • The 1st version only supports a single ring architecture; the newest version already has the ability to address multiple inter-connected rings.

  9. Drivers for ERPS

  10. Benefits of ERPS - Comparing with past Lantech Pro Ring redundancy solution, ERPS is suitable for various and complex networking environments and had passed 11 types of topology by laboratory test and BMT test

  11. Evolution of Lantech ITU G.8032/ERPS

  12. Features • ITU G.8032(ITU-Ring) support varies topology • recovery time < 50ms • Ring Miswiring Avoidance • NMS can get real time information of the switches. not influenced by NMS pulling cause high CPU loading /switch hang. • In case of a group of switch shut down, the Ring will be survive when the switches come back.

  13. Single Ring

  14. Dual Rings

  15. Double Ring

  16. Cascade Chain

  17. Multiple Chain

  18. Multiple Chain Share Common Ends

  19. Chain in Chain

  20. Redundant Coupling

  21. Redundant Coupling with Multiple Rings

  22. Multiple Rings

  23. Dual Homing

  24. Harsh operating Testing

  25. Abnormal operating testing

  26. Loop protection with Watch Dog If CPU of switch was hanged with some accident, the watch dog will reset the switch.

  27. MSTP(IEEE802.1s) support • Compatible with RSTP/STP

  28. Application of MSTP • Redundancy Path of RSTP/ STP can be built up between switches • Redundancy Path of MSTP can be built up between VLAN Groups

  29. Support IP V6

  30. IPv6 Internet Protocol version 6 (IPv6) is the latest revision of the Internet Protocol (IP), the communications protocol that provides an identification and location system for computers on networks and routes traffic across the Internet. IPv6 was developed by the Internet Engineering Task Force (IETF) to deal with the long-anticipated problem of IPv4 address exhaustion. We are ready for the IPv6 standard.

  31. Remote Management Demands

  32. Demands for On-Site Device Management How the equipments were connected by end user? What’s the root cause? What’s happening in field ? Or the problem was caused by environment issue?

  33. SNMP Solution

  34. Besides the SNMP… • Smart Event System • - Providing other channels for Event Log transmission • Topology View • - Built-in user-friendly management tools • Environmental Monitoring • - Remote monitoring for hardware status.

  35. Event System Local save 、Syslog server 、Email 、SMS、SNMP Trap 、DO 、Alarm Relay

  36. System Event with SMS Connect 5408 switch with internet, the switch will send event log to SMS Server via internet and you can receive the event log by your cell phone with SMS service.

  37. Built-in RTC let you know when the event occur No more need to connect to time server for time synchronizing

  38. log remote log SNMP trap Email SMS DO Fault LED Event / Action Matrix (configurable) • Link up/down • Din • Power on/off • Reboot • Login/Logout • HW threshold • temp, voltage, • DDM threshold • temp, dbm

  39. SFP DDM threshold monitor

  40. Many Ways to Know the Status of Switch Remotely

  41. Topology View • Developing on LLDP protocol • Showing the system information of • each switch • Showing the primary path and backup • path • Helping the remote manager to understand • the network topology in field

  42. LLDP Through LLDP feature, the data of connection(IP, Port) between switches can be acquired by SNMP.

  43. CDP Support Cisco Discover Protocol Use to integrate with Cisco group manage solution

  44. Environmental Monitoring

  45. Benefits of Environmental Monitoring - The status of input voltage, current, power consumption, temperature, and CPU loading are able to be acquired by system manager and determine if issues are caused by environment or hardware.

  46. Advance SecurityManagement

  47. Access Control List • Filtering: Manage IP Traffic by filtering packet passing through the switch. • Classification: Identify traffic for special handling • Support filtering by MAC and IP address

  48. 802.1X The switch acts like a security guard to a protected network.

  49. SSH and SSL SSH: SSH can be selected via telnet mode while logging in the switch SSL: SSL can be selected via Web browser mode while logging in the switch

  50. Access Security - IP security: To restrict which IP can access the switch - Management Access Policy Control: Able to configure the user account for access authority. Ex, on-site system manager can configure the “Read Only” permission.

More Related