1 / 35

8/21/2014

Final Presentation On Training at Nokia Siemens Network Submitted in the partial fulfillment of the requirements For the degree of Bachelors of technology. Guided By: Mr.D.K Kothari Associate Professor. Presented By: Hitesh Sharma 05BEC107. 8/21/2014. 1. Base Station Subsystem.

mariko
Download Presentation

8/21/2014

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Final Presentation On Trainingat Nokia Siemens Network Submitted in the partial fulfillment of the requirements For the degree of Bachelors of technology Guided By: Mr.D.K Kothari Associate Professor Presented By: Hitesh Sharma 05BEC107 8/21/2014 1

  2. Base Station Subsystem BSS Includes • Mobile Device • BTS (Base Transceiver Station) • BSC (Base Station Controller) • Transcoder

  3. BTS Construction BTS with 12 TRX and supporting equipments for its optimum performance.

  4. UltraSite BTS KEY: 1 Transceiver unit 2 2-way Receiver Multicoupler unit 3 Transceiver Baseband unit 4 Base Operations and Interfaces unit 5 Transmission unit 6 Wideband Combiner unit 7 Dual Variable Gain Duplex Filter unit 8 DC/DC Power Supply unit 9 6-way Receiver Multicoupler unit 10 Remote Tune Combiner unit 11 AC/DC Power Supply unit 12 Bias Tee unit 13 Dual Band Diplex Filter unit

  5. 1. Transceiver Unit The TSxx unit of the Nokia UltraSite EDGE BTS performs RF modulation/demodulation and amplification for one RF carrier

  6. 2.Multicoupler Multicoupler is a passive unit. The unit divide Received (RX) and Diversity-Received (DRX) signals and distribute them to the Transceiver (TSxx) units.

  7. 3. Baseband Card The BB2x unit is a digital signal processing. The BB2x also controls frequency hopping. Uses software downloaded from the Base Operations and Interfaces

  8. 4.Base operations and Interface unit (BOIA) Configuration Operations and Maintenance (O&M) functions Software downloads Main clock functions Collection and management of external and internal alarms

  9. 5.Transmission Card It deals with framing and deframing of E1 and cross connections

  10. 6.Wideband Combiner The WCxx unit combines transmit (TX) signals from two transceiver (TSxx) units and feeds the combined signal to the TX port of the Dual Variable Gain Duplex Filter (DVxx) unit.

  11. 7.Dual Variable Gain Duplex Filter The DVxx performs the following primary functions: • combines transmitted and received signals into one antenna • amplifies received signals with a variable-gain Low Noise Amplifier (LNA)

  12. Uplink Call Flow Duplexer Multicoupler GSM Antenna MobileUnit TRx BSC Microwave Antenna Transmission Unit BB2F 8/21/2014 12

  13. Downlink Call Flow Microwave Antenna BB2F TRx Mobile Station GSM Antenna Duplexer Combiner 8/21/2014 13

  14. Practical Activities • In Building Solution. • TRx addition and deletion. • Changing Sinner TRxs by Frisco TRx. • Antenna Down tilting. • Traffic allocation using BTS manager software. • Alarm monitoring using Reflection Router. • MapInfo Software. • Net Monitor. • Drive Test.

  15. In Building Solution • It is a process, where in we radiate adequate Mobile signals of one particular Network operator in that entire building. • Offices/industries. • Airports and bus/train stations. • Conference and exhibition centers. • Hospitals. • Hotels. • Shopping malls.

  16. The repeater system is a two-way amplifier that provides booster performance to extend the coverage of radio communications in buildings, basements and other RF shadow areas. • The Repeater receives signals from one antenna, amplifies them and transmits through the other antenna.

  17. Power Calculation +43dbm :ultra site power -5dbm :cable loss -1dbm :connector loss +18dbm:GSM antenna gain **************** +55dbm:EIRP {Equivalent isotropically radiated power } **************** -115dbm: Path loss -8dbm:Multipath Fading loss +12dbm:Gain of Yagi Antenna -5dbm:Rf cable loss -1dbm:Connector loss +90dbm:Repeater Gain -1dbm: Repeater Connector loss -5dbm:Repeater cable loss +6dbm :Panel Gain -80dbm:Free space loss **************************************** -52dbm: Repeater o/p power in room ****************************************

  18. TRx addition and deletion • One TRx supports 8 users at a time to operate • And a BTS supports maximum 12 TRxs. • If number of users are less than we don’t utilize the full capacity of the BTS. • But if number of users increase then we have to make changes in the configuration. • And we have to add TRxs.

  19. For that first of all we have to make addition logically from the NMS server. • Then we have to allocate the traffic to that TRx. • After that we have to go to that site and then physically add a new TRx and its physical connections to be made. • After that we have locally login in that site and then unlock that TRx. • Now if its LED is orange that shows its working. • If LED is green then that shows calls are going on that TRx.

  20. And if the LED is red that it shows the faulty condition of TRx. • We have to delete it and add a new TRx. • Now in Deletion first we have to lock that TRx before removing it physically. • By locking that TRx the calls going on that TRx will be transferred to another TRx and no any new calls will arrive on that TRx. • Now it is to be physically removed and new TRx to be added.

  21. Sinner to Frisco • These are TRx types defined by its power level. • In Frisco TRx if call is not going on that TRx then it will make power level of that TRx less. • In Sinner TRx it will maintain its power level though the call is not going on. • So Frisco TRx are to be used to save the power consumption in idle condition. • But the TRx which contains the BCCH should be Sinner because if the power Level of BCCH goes down then it create coverage problems.

  22. In a sector of a Site there are four TRx as there are three sectors at a site of 12 TRxs. • On one TRx out of that four will have the BCCH. • So we have to put a Sinner TRx which contain BCCH and all the three TRx which carry only traffic should be Frisco.

  23. Nokia BTS manger software • This software helps us to access a particular site whose site ID is known. • It shows current internal structure of a specific site. • BTS manager is a tool which is used for remote login. • It shows the hardware status and configuration.

  24. TRAFFIC MANAGER • The traffic manager gives us the information about the traffic condition of a particular BTS. • This E1 is having 2.048 Mbps total space. • There are 32 slots or channels in each E1s. • Each is further divided into 4 time slots. • Each time slot is of 16kbps.

  25. Channel 0: It always dedicated to BCH signalling. • Channel 1 to 21: These channels are assigned to TCH . On TCH the voice call take place. 2 channels are given to one TRX. • Channel 27 to 31(except 2nd slot of channel 31): These all slots are assigned to TRX signaling. The signaling if TRX is necessary for synchronization. • Channel 31 and time-slot 2: This time a lot is always assigned to OMU signaling. OMU(Operation Maintenance Unit) is the heart of a BTS. OMU is the intelligent pare of a BTS. The instruction regarding to any BTS is given to that BTS through OMU signaling. If the OMU signaling is not proper then the site will not work properly. • Channel 22 to 26: The remaining time slots are assigned to EDAP. EDAP is for the data transmission for GPRS usage of MS (Mobile station). Data packets are handled by these time-slots.

  26. Map Info • It is a software which is used to determine various parameter of a network. • It is also used in frequency planning. • It is also used to determine physical location of each cell and frequency used in each cell. • It is also used to show orientation of each sector. • Any position can be mapped into this.

  27. Net Monitor • Net monitor is a software tool which is present in mobile itself. • Net monitor is used to find certain parameters related to received signal and cell.

  28. Drive Test • For drive testing, a test mobile is used. This test mobile keeps on making calls in a moving vehicle that goes around in the various parts of the network. Based on the parameters, the quality of the network can then be analyzed.

  29. Benchmarking • In benchmarking, the performance of different operators is compared. • The relevant software will store all the data related to the drive test such as the path followed, the number of dropped calls, the average signal strength, average quality etc for all the MSs of different operators

  30. NEIGHBORING CHANNEL SIGNAL LEVELS

  31. SNAP SHOT OF VOICE QUALITY

  32. Thank You!!

More Related