1 / 9

RR AIP

RR AIP. Ioanis Kourbanis 12/19/12. Requirements. Provide proton beam with the proper time structure from the Recycler to the muon campus for the g-2/mu2e experiments. Scope.

marly
Download Presentation

RR AIP

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. RR AIP IoanisKourbanis 12/19/12

  2. Requirements • Provide proton beam with the proper time structure from the Recycler to the muon campus for the g-2/mu2e experiments.

  3. Scope • New 2.5 MHz RF system in Recycler to provide the required beam structure. Will also provide 2 2.5 cavities for mu2e experiment. • New RR extraction Kickers to kick the proton beam out of the Recycler. • New beam-line to connect Recycler to the existing P1 line. • An extension to the MI-52 will be needed to accommodate the new kickers and the kicker cooling skid. (Not a part of this AIP).

  4. 2.5 MHz RF Cross sections of the 2.5 MHz coalescing cavity Coalescing cavity PA • We cannot use the existing MI coalescing cavities because they do not have active cooling. • New cavity design with cooling plates between ferrites (9 total cavities). • We will re-use the ferrites and PAs from existing coalescing cavities (additional ferrites and PAs will be needed) Coalescing cavities in MI (5 2.5 MHz +1 5.0 MHz)

  5. RR To P1 Beam line RR • Simple beam line but located in a very busy area with a lot of interferences. Very challenging installation. • Have to shield both Recycler and the new beam line from MI fields. P1 Line MI MI-52 Extraction Region

  6. RR Extraction Kickers ANU RKB Kicker Magnet • 2 new kicker magnets will be required. The magnets will be of the new RKB style designed for ANU. • We are going to re-use the beam tubes from the recently decommissioned Recycler kicker magnets. • We are going to re-use the PFLs from the Recycler kickers. • Two new 25 Ohm loads capable of up to 250 W average power will be built. • A flurinet cooling skid will be used to cool the loads.

  7. Project Plan • We assume installation of the Extraction Kickers and the Beam line Stub in Summer 2014. • We assume the 2.5 RR RF in Summer 2015. • A 30% contingency has been assumed.

  8. Funding Profile

  9. Labor by Categories

More Related