1 / 7

Chinese metal panelled dishes Neil Roddis Apr 15, 2010

Chinese metal panelled dishes Neil Roddis Apr 15, 2010. CETC54 and NWIEE (CETC39). Shanghai, Urmqi. S. ASKAP. Both have mostly produced panelled dishes. CETC54 preliminary design. Produced in a very short time, from very limited information Detailed report. NWIEE preliminary design.

marnin
Download Presentation

Chinese metal panelled dishes Neil Roddis Apr 15, 2010

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chinese metal panelled dishesNeil RoddisApr 15, 2010

  2. CETC54 and NWIEE (CETC39) Shanghai, Urmqi S ASKAP Both have mostly produced panelled dishes

  3. CETC54 preliminary design Produced in a very short time, from very limited information Detailed report

  4. NWIEE preliminary design Produced from even less information

  5. CETC54 panels 2 mm aluminum stretch-formed panels with aluminum honeycomb filler. Relatively new process, still under development. 0.1 mm rms claimed for the panels Machined tool required for each panel type – could be expensive for a one-off offset shaped Gregorian.

  6. DVAC? It could be interesting to have CETC54 and/or NWIEE make a panelled dish to the TDP specification

  7. End

More Related