1 / 13

Precision Electrics

Job description for electricians in Manchester

marysomex
Download Presentation

Precision Electrics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Electrical Trades Electrician’s Tools Of The Trade Presented by Manchester Electricians

  2. Learning Objectives • Identify the basic hand tools used in the electrical trades. • Select the essential tools for each specific job. • Maintain and use these tools safely. • List factors to consider when purchasing hand tools. Building Trades: Electrical Tools of the Trade

  3. The Electrician’s Tool Pouch • The Electrician’s tool pouch is essential in that it helps kept electrical tools organized. The tool pouch allows the right tools at hand which makes the job more efficient. • The electrician must have proper tools for the job. • Tools must be maintain and kept in good working condition. • Certain tools are essential, and without them the electrician should not attempt to do any type of wiring. • Listed are the basic hand tools that are essential to electrical wiring. Building Trades: Electrical Tools of the Trade

  4. Needle-nose pliers Forming loops on small conductors Cutting and stripping small conductors Electrical Specific Hand Cutting Tools Diagonal pliers (dykes) Cutting small conductors Cutting conductors in limited spaces Lineman’s pliers (side cutters) Cutting large conductors Forming loops on large conductors Pulling and holding large conductors Wire strippers Stripping insulation from conductors Cutting small conductors Crimping wire lugs Building Trades: Electrical Tools of the Trade

  5. Electrical Specific Hand Tools Tap tool Equipping drill holes with bolt threads Retapping damaged threads Determining bolt size Center punch Making center tap in wood or metal for drilling Flat-blade screwdriver Installing and removing slot-head screws Phillips screwdriver Installing and removing phillips-head screws Building Trades: Electrical Tools of the Trade

  6. Electrical Specific Hand Tools Slip-joint pliers Holding couplings and conductors Tightening couplings and conductors Magnetic torpedo level Leveling conduit and equipment Keyhole saw Cutting holes in plasterboard for circuit boxes Conduit reamer Reaming burrs from cut conduits and EMT Building Trades: Electrical Tools of the Trade

  7. Electrical Specific Hand Tools Hacksaw Cutting large conductors and cables Cutting conduit, metal, or bolts Steel measuring tape Measuring conduit and cable Adjustable wrenches Used for turning bolts, nuts, and small pipe fittings Nut driver Installing and removing nuts and bolts Tightening and loosening nuts and long bolts Building Trades: Electrical Tools of the Trade

  8. Electrician's Essential Tools Electrician’s hammer Diving and pulling nails Opening wooden crates and breaking plasterboard Circuit tester Checking circuits for power Checking fuses and breakers Electrician’s knife Opening paper cartons Stripping cables and large conductors Hex key set (Allen wrenches) Installing and removing Allen screws Building Trades: Electrical Tools of the Trade

  9. Tools Used for Specialty Work Steel fish tape and reel Pulling conductors through conduit Pulling cables through insulated walls Conduit bender Bending conduit for conductor installation Rotating speed screwdrivers Used for trim work, installing switch and receptacles Sheet metal Cutters Used for cutting and trimming sheet metal Building Trades: Electrical Tools of the Trade

  10. Rules for care of hand tools • There are many more hand and power tools that electricians will use in residential and commercial wiring. • All tools should be used only for the purpose intended. • It is the electrician’s responsibility to keep his or her tools sharp, clean, and lubricated. • A well maintained tool has a longer life and is safer than an improperly maintained tool. • Repair tools when possible, but discard worn or damaged tools. Building Trades: Electrical Tools of the Trade

  11. Factors For Purchasing Tools Factors to consider when purchasing tools are size, design, and quality. • Always purchase the correct sizedtools for the work to be done. • Tools should be designed specifically for electrical work. Ex: Insulated handles, hammers with straight claws. • The purchase of quality tools last longer which saves replacement cost. Building Trades: Electrical Tools of the Trade

  12. Remember • Select the right tool for the job. • Keep tools clean, lubricated, and in good working condition. • Purchase good quality tools they are safer and will last longer. • Repair tools when possible, but discard worn or damaged tools. Building Trades: Electrical Tools of the Trade

  13. Electrician’s Tools Of The Trade Presented by Manchester Electricians Building Trades: Electrical Tools of the Trade

More Related