1 / 4

Bryan, We received the SIP simulator package. Thanks..

Received SIP simulator package, laptop operational, unclear port definitions. Some cables unlabeled, pinouts not discussed in manual. Seeking documentation for connector details and pinouts. Photos taken for cable identification.

mcrozier
Download Presentation

Bryan, We received the SIP simulator package. Thanks..

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Bryan, We received the SIP simulator package. Thanks.. We powered up the laptop which seems to be operational as far as we can tell. It is not clear of the port definition and functionality in two modules. 3 of the cables are not labeled so the physical layout is well defined. Also the pin out are not discussed in the manual. We took a few photos of the setup to defined each cable primarily for discussion purposes. Based on the some of the labels, the white box must be the instrument interface.. Do you have documentation that describes each connector and the respective pin out definition ?? Thanks, John

  2. Connector 2 Unlabeled Connector 3 Command ? Connector 4 Unlabeled Connector 1 Unlabeled GSE Interface ??

  3. Connector 4 Connector 1 Connector 3 Connector 2 Bottom module GSE Interface ??

  4. Payload Interface ?? Connector 9 Sci Data Connector 5 High Rate Connector 6 COMM2 Connector 7 COMM1 Connector 8 COMMAND

More Related