1 / 9

Floor Framing

Floor Framing. Platform Framing. Two-Story Framing . Before Constructing the Frame. When you pour the foundation, install into the concrete in anticipation of the . Check the foundation is and parallel Add p osts in the center for support.

milica
Download Presentation

Floor Framing

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Floor Framing Platform Framing Two-Story Framing

  2. Before Constructing the Frame • When you pour the foundation, install into the concrete in anticipation of the . • Check the foundation is and parallel • Add posts in the center for support

  3. Before Constructing the Frame • Install the sill plate between and the . • Drill holes in the sill plate that . • Slip the plate into place, attaching nuts to the bolts.

  4. Constructing the Frame • Construct the header and end joists on top of the sill 2. Add a butt-to- (this type is built to be flush with the tops of the floor joists and perimeter sill) • The girder may be made by or by buying a laminated girder

  5. Constructing the Frame 3. Add metal joist hangers or a strip of lumber to the girder 4. Mark off ” from the corner and across both header joists

  6. Constructing the Frame 5. Cut to length 6. Add at your marked spots

  7. 7. Installing Floor Bridging • : Good use of leftover boards fastest to make • : Very strong, but more time consuming • : Higher expense, but faster to assemble

  8. 8. Installing the Subfloors • Made of plywood • Panels are placed so the of panels run to the joists • Plywood should start and end in the center of a joist

  9. Draw the Plans 8’ x 4’

More Related