E4014 Construction Surveying

1. E4014 Construction Surveying Road Construction Plans

2. Plan No 239170 traffic lane width • Widening and Overlay and Reconstruction

3. Plan No 239170 traffic lane width shoulder width • Widening and Overlay and Reconstruction

4. Plan No 239170 traffic lane width shoulder width left and right crossfall • Widening and Overlay and Reconstruction

5. Plan No 239170 traffic lane width shoulder width left and right crossfall slope from shoulder • Widening and Overlay and Reconstruction

6. Plan No 239170 traffic lane width shoulder width left and right crossfall slope from shoulder reference point numbers • Widening and Overlay and Reconstruction

7. Plan No 239170 • Location of Signs

8. Plan No 239170 pavement details • Superelevated curves Chainages

9. Plan No 239170 • Sub-Surface Drainage

10. Plan No 239171 / 239176 Plan View chainages

11. Plan No 239171 / 239176 Plan View chainages tangent points

12. Plan No 239171 / 239176 Plan View chainages tangent points curve radii & tangent lengths

13. Plan No 239171 / 239176 Plan View chainages tangent points curve radii & tangent lengths culverts - existing benchmarks and permanent marks bearings of straights cadastral information

14. Plan No 239171 / 239176 drainage data vertical curve data longitudinal gradients Longsection overtaking lane data road formation depths

15. Plan No 239171 / 239176 offset pegs location Bench Mark details Revision No Plan No Title Block

16. Cross Section Variations • new road constructed over existing bitumen surface Plan No 239177

17. Control Line and Brandy Creek Rd Equivalences road widths on main road Plan No 239178 tapers - approx chainages Brandy Creek Road Horizontal Centreline Details semi-mountable kerb radii Brandy Creek Road widths Brandy Creek Road Vertical Details Brandy Creek Road Turnout Brandy Creek Road drainage feature

18. Plan No 239178 Bus Stopping Area location tapers - approx chainages Typical Minor Turnout location diagram and dimensions

19. Plan No 239178 Semi Mountable Kerb Details dimensions offset and level point Flared End to kerbing dimensions

20. road widths Plan No 239179 Gregory - Cannon Valley Road horizontal details Auxiliary lane tapers - approx chainages shoulder taper semi-mountable kerb radii Road equivalences Cannon Valley Turnout

21. median taper Plan No 239179 Robinson Road details Connection to existing roads Detail A – line marking Cannon Valley Turnout

22. Plan No 239180 Diversion Channel horizontal position & RL batter slope Typical Access Detail & Table of Accesses necessary to locate access & drainage structure Various Line Marking

23. Plan No 239182 Drainage Cross Sections pipe diameters pipe lengths inlet and outlet RLs centreline chainage skew angles measured relative to CL

24. Plan No 239182 Levee Detail dimensions Location & RL

25. Plan No 239217 • Upstream/End treatment for Cuttings • dimensions • Outlet Details in Subsoil Drain Cuttings • dimensions • Subsoil Drain & cleanouts • depth of subsoil drain • dimensions of excavation • Subsoil Drain Layout • chainages and RLs

26. Plan No 239218 Pegged Line Control Line Horizontal Alignment Tangent Points- Control Line Tangent-to-circle (TC) Circle-to-tangent (CT) Points of Intersection (PI) - Control Line

27. Plan No 239218 Pegged Base Line Point No Coordinates & Pegged Chainage

28. Plan No 239218 Control Line Point No Coordinates & Control Chainage and tangent points

29. Plan No 239218 Connections tangent points on the Control Line to Chainages on the Pegged Base line Control Line Point No Pegged Base Line Chainage Offset - Pegged to Control

30. Plan No 239218 Bench Marks Bench Mark No Coordinates Control Line Chainage & Offset

31. Plan No 239219 Table 1 - 12 Explanation of the Construction Cross section

32. Plan No 239219 Table 1 - 12 • Explanation of Construction Cross section • lists the relationship between the base line and the control line • columns 1 - 6

33. Plan No 239219 Table 1 - 12 • lists information for setting out: • catch points • columns 7 - 10 • relative to the base line • batter slopes • columns 11 - 14 • relative to control line • berms & benches • columns 15 - 18 • maybe relative to base or control line

34. Plan No 239219 Table 12 Base Line Base Line Chainage natural surface level at the Base Line chainage

35. Plan No 239219 Table 12 Control Line Chainage along the Control Line where the Base Line cross sections intersect the Control Line Grade Level is the calculated level at the Control Line chainage Offset Base to Control is the distance measured along the line of the cross section from the Base Line to the Control Line and is “-” left of the Base Line

36. Plan No 239219 Table 12 Level Diff Base to Control Lists the difference in level between the Base Line surface level and the Control Line grade level with “-” indicating the Control Line level is lower

37. Plan No 239219 Table 12 Catch Points LHS/RHS, Dist and RL indicate the square or radial offset from the Base Line, and the reduced level at that offset of the designed intersection of the batter slope and the natural surface Due to irregularities in the natural surface, the batter may not cut the ground at that point but… the batter is to pass through the offset DIST/RL point as designed The distance is measured to the left (“-”) and right of the Base Line

38. Plan No 239219 Table 12 Slopes Slopes, CUT/FILL, LHS/RHS. These columns list the horizontal dimension x of the slope 1 on x measured square or radial to the Control Line

39. Plan No 239219 Table 12 Dist from Base Line is measured square or radial to the Base Line (along the line of the cross section) to the outer point of the berm or bench Berm and Bench Details RL’s. The reduced level of the outer or inner berm or bench points Width. The width of the berm or bench A. Bench Width - measured square or radial to the Base Line B. Berm Width - measured square or radial to the Control Line

40. Plan No 239219 Table 13 - 24 Table Drains Table Drains, LHS/RHS, Width & Slope. The respective widths and slopes of LHS and RHS table drains measured square or radial to the Control Line

41. Plan No 239219 Table 13 - 24 Base Line Base Line Chainage

42. Plan No 239219 Table 25 - 48 Control Line Control Line Chainage 10m intervals including horizontal & vertical tangent points from which the the pavement dimensions are given square or radial. Grade Level

43. Plan No 239219 Table 25 - 48 Base Line Base Line Chainage equivalent to the Control Line chainage

44. Plan No 239219 Table 25 - 48 Pavement Depth Total depth of pavement is shown in millimetres (mm)

45. Plan No 239219 Table 25 - 48 Pavement & Shoulder Setting Out Offset dimensions (metres) are given square or radial to the Control Line and are shown “-” if to the left of that line. Offsets include allowances for local widening. Rise & Fall. This gives the crossfall or superelevation of the pavement and shoulder points in the form of rise or fall (millimetres) above or below the grade level at the Control line. Falls are “-”. Local widening is taken into account.