1 / 17

Quadrature Amplitude Modulation

Quadrature Amplitude Modulation. Forrest Sedgwick UC Berkeley EECS Dept. EE290F October 2003. Analog vs Digital. Information Theory vs Signal Analysis Discrete Levels vs Analogous Representation Sacrifice arbitrarily precise representation of signal

montana
Download Presentation

Quadrature Amplitude Modulation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Quadrature Amplitude Modulation Forrest Sedgwick UC Berkeley EECS Dept. EE290F October 2003

  2. Analog vs Digital • Information Theory vs Signal Analysis • Discrete Levels vs Analogous Representation • Sacrifice arbitrarily precise representation of signal • Gain arbitrary degree of reproducibility of given signal • KEY BENEFIT • Discrete information can be transmitted with arbitrarily low error rates EVEN ON A NOISY CHANNEL • Digital information content measured in units of bits, decimals, or nats

  3. Shannon’s Channel Capacity • Channel capacity C (bits/sec) is the speed at which information can travel over a channel with an arbitrarily low error rate i.e. when a system is transmitting bits at or below C then for any BER e>0 there exists a code with block length n which will provide a BER < e. www-gap.dcs.st-and.ac.uk/~history/ Mathematicians/Shannon.html Assumes noise is thermal – Gaussian and White

  4. Modulation • All channels consist of some continuous parameter • Must map discrete states onto continuous property • Must have a decision circuit to map the state of the modulated channel into a discrete state • As number of levels or states M the behavior of the digital system does not approach that of an analog system, due to the decision circuit

  5. Number of Levels • Digital communications relies on a finite number of discrete levels • Minimum number of levels is two (binary code) • Shannon Capacity helps determine optimum number of levels for a given bandwidth, SNR, and BER

  6. Limits on Communication Channels • Two types of communication channels • r<<1 – Power Limited • High dimensionality signaling schemes • Binary • r>>1 – Bandwidth Limited • Low dimensionality • Multilevel Proakis and Salehi, pp. 738

  7. Modulation Scheme • A channel with lowpass frequency characteristics is called baseband. Digital information is transmitted directly • Ex. Pulse Amplitude Modulation (PAM) • A channel far removed from DC (like optical) is called a bandpass channel • Transmission on a bandpass channel requires modulation of a carrier • Amplitude Shift Keying (ASK) • Phase Shift Keying (PSK) • Frequency Shift Keying (FSK • Quadrature Amplitude Modulation (QAM)

  8. Amplitude Shift Keying (ASK) • Amplitude of carrier wave is modulated • Equivalent BER vs SNR to baseband PAM Proakis and Salehi, pp. 306

  9. Angle Modulation (PSK and FSK) • Frequency is time derivative of phase, PSK and FSK are somewhat equivalent Proakis and Salehi, pp. 332

  10. PSK: Digital Angle Modulation • Usually in digital communications PSK is chosen over FSK • Easier to create multilevel codes • Possibility of using differential phase shift keying (DPSK) • Uses phase shifts relative to previous bit • Eliminates need for local oscillator at receiver • Use Gray Code to minimize effect of errors Proakis and Salehi, pp. 631

  11. Quadrature Amplitude Modulation • Amplitude and Phase of carrier are modulated • Discrete amplitudes and phases form a constellation • Can also think of QAM as a “complex” amplitude modulation scheme Proakis and Salehi, pp. 653

  12. Constellations • Different constellations require different SNR for a given BER • (d) is lowest power by about 1dB (for given BER) • (a) and (b) are rectangular • Rectangular constellations offer very simple modulation/ demodulation schemes • ASK two quadrature carriers - same frequency but 90 out of phase • Mix quadrature carriers for output Proakis and Salehi, pp. 653

  13. QAM vs ASK (multilevel) • QAM has a tremendous advantage in noise performance • Energy in every bit (including zero) • Substantially more complex (coherent detection vs photodiode) Proakis and Salehi, pp. 565 Proakis and Salehi, pp. 495

  14. QAM vs PSK • 4-QAM and 4-PSK have same power penalty • For k>4, k-QAM is an improvement over k-PSK Proakis and Salehi, pp. 639

  15. Applications of QAM • Used in bandwidth-limited applications • Modems: telephones have 3kHz bandwidth, excellent SNR (20dB) => M-ary QAM • Cellular Telephones: Bandwidth is at a premium, very expensive (However, POWER is also at a premium...)

  16. Limitations • Almost always requires a highly stable local oscillator • In the optical domain this is very expensive • Possible (but difficult) to use differential phase keying • Performance limits still not reached for • Direct detection • Signal Dimensionality (DWDM) • Transmitter Power

  17. References • John G. Proakis, Masoud Salehi, Communications Systems Engineering, Prentice Hall 1994

More Related