80 likes | 89 Views
This set of instructions provides students with a step-by-step guide on how to set up and use a gel electrophoresis student station. It includes tips on setting up the gel, using a micro-pipettor, and loading the gel with food color solutions.
E N D
Gel Electrophoresis Student Instructions VWR Set up
Gel Electrophoresis Student Station Set-up tip container w/tips waste container practice sheet in protector foam epi rack w/ 1 food color tube each: orange, green, purple Micro-pipettor
How to Use a micro-pipettor Plunger • Parts of a Micro-pipettor • Make sure a yellow tip is firmly twisted onto the end of the micro-pipettor • Adjust the dispense amount to 5 µl (05.0) by turning the knob at the top Eject button Amount window Barrel Yellow tip
How to Use a micro-pipettor • Carefully open one of the food color tubes • Don’t let the lid snap back and splash you! • To Fill – press down gently with your thumb until you feel the plunger stop. This is STOP 1. While holding the plunger at Stop 1 place the tip into the liquid and release the plunger. This will draw up the precise volume you want.
How to Use a micro-pipettor • To Dispense – press down hard on the plunger, you’ll pass Stop 1 and continue to STOP 2. This will fully eject the volume from the tip. • Using your other hand to guide the end of the tip, practice dispensing the 5µl drops • Try to not push down on the plastic sheet - see if you can hold the pipettor tip just above the paper
How to Use a micro-pipettor • Push green button to eject the dirty tip into the waste container and replace with a clean tip • Always use a clean tip each time!!
How to Use a micro-pipettor • Ready to load a real gel?
Loading the gel • Load the food color solutions into the wells on your group’s gel • Be careful not to poke through the bottom of the wells!