Plasto-Sac

1. Plasto-Sac Product presentation

2. Plasto-Sac Security Envelopes

3. A single-trip envelope for the transfer of money, valuable items, classified documents. Plasto-Sac Security Envelopes Definition:

4. Definition of “Tamper-Evident”: • Any attempt to tamper with the closed envelope, in any known way, must leave unequivocal and unchangeable signs. • The signs must be closed to misinterpretation. • These signs must be clearly visible at arm’s distance. • The tamper-evident mechanism must be solid and reliable, to prevent false alarms during normal use of the envelope. Plasto-Sac Security Envelopes

5. 5 Security Mechanisms are employed…… Plasto-Sac Security Envelopes

6. 1. Mechanism Attempts to open the closure tape result in the appearance of the words VOID or STOP. Plasto-Sac Security Envelopes

7. 1. Mechanism The VOID or STOP mechanism is activated during attempts to tamper with the tape/envelope at – • ambient temperature • at cold temperatures, below ambient temperature and down to -45oC (using freezer conditions, pipe freezing fluid, or freezing spray) • by the use of heat above ambient temperature and up to the temperature at which polyethylene changes form (using an oven, steam, hair drier, etc.) Plasto-Sac Security Envelopes

8. 2. Mechanism The security tape is multi-layered, with very fine layers. • The internal layer is serrated by micro-perforation. • Peeling the tape will break the tape’s structure in a manner which is evident and cannot be corrected, nor reconstructed. • This mechanism is unique, proprietary and patented. Plasto-Sac Security Envelopes

9. 3. Mechanism Attempts to open the envelope by dissolving the glue with different solvents cause a partial or full disappearance of the red colored, diagonally printed lines on the tape. Plasto-Sac Security Envelopes

10. 4. Mechanisms Attempts to open the envelope through the heat-sealed edges, whether heat-sealed again or not, cause an opening to appear, and/or the disappearance of the fine print along the soldering. Plasto-Sac Security Envelopes

11. 5. Mechanism Attempts to change the serial number on the envelope cause a mismatch between the number on the envelope and the one appearing under the safety tape, which can be accessed only through complete removal of the tape. Plasto-Sac Security Envelopes

12. Date:Signature: Date:Signature: Receipt Voucher on Top ENVELOCK ENVELOCK ENVELOCK xxx-xxxxxx xxx-xxxxxx xxx-xxxxxx Over Lap Area(Yellow Area) ENVELOCK ENVELOCK xxx-xxxxxx Open Side ENVELOCK Security Tape ENVELOCK Serial Number Bar -Code ENVELOCK ENVELOCK ........ . ......... ......... .. ....... ......... .......... ENVELOCK Micro-perforation Holes Heat Sealing Area ENVELOCK ENVELOCK ENVELOCK ENVELOCK ENVELOCK Receipt Voucheron Bottom Plasto-Sac Security Envelopes

13. Overlap Side View Security Tape Overlap Area for full protection Gray Area =Sealed Area Plasto-Sac Security Envelopes

14. Triggering the Mechanisms: All tamper-evident mechanisms must be activated immediately upon closing the envelope. Plasto-Sac Security Envelopes

15. 1. Materials The envelope is produced from polyethylene plastic film. Several different options are possible, according to clients’ needs. Several common options are listed below: • A transparent film, allowing for clear viewing of the envelope’s contents. • A gray film, for optical opacity. • A co-extruded (double or triple layer) film, white on the external layer of the envelope and black on the internal layer, achieving a total optical opacity. Plasto-Sac Security Envelopes

16. Thickness: According to the needs of the client. Thickness generally ranges between 50-140 microns. Measure- ments: According to customer needs. Allowed Deviation: Thickness: ± 8% Length\width: ± 5% 2. Materials Strength and aspect: Adjustable strength (tear, impact and puncture resistant), and aspect of the film (e.g.high-friction anti-slip exterior film quality). Plasto-Sac Security Envelopes

17. Numbering: Each envelope is numbered to avoid substitution after tampering, as well as for easy follow-up on delivery and reception. Bar-coding: If demanded, the numbering will include barcode. Possible bar-coding methods are 2/5 and 39. Additional Features: Document Pocket: A document pocket, with or without glue, on the external part of the envelope, is an option. The pocket is usually made of a 50-micron transparent polyethylene. Printing: According to the client’s demand, up to four colors (the background in the areas used for writing is usually matte white). Note: Design can affect security level. Plasto-Sac Security Envelopes

18. Additional Features: Axytrans Homologation Plasto-Sac Security Envelopes

19. Storage conditions: The envelopes and packages should not be exposed to direct sunlight. Their storage place should be dry, cool and shaded, and not exposed to dust. Expiry: If the right storage conditions are provided, the envelope’s expiry date is up to one year (under general guarantee conditions). Additional Notes: Tests: In every production lot the following are checked and tested: Measurements, thickness, strength, print and heat-seal. All tamper-evident mechanisms are examined in all environmental conditions and temperature ranges. Examinations take place: a) upon the closure of the envelope. b) after one hour. c) after 24 hours of closure. Quality documents: The client receives a Certificate of Analysis (C.O.A.) for each lot of envelopes. Plasto-Sac Security Envelopes