1 / 2

Equal-Channel Angular Pressing (ECAP) and High-Pressure Torsion (HPT)

Creep and Superplasticity in Materials with Ultrafine Grain Sizes Terence G. Langdon, University of Southern California, DMR 0243331. Equal-Channel Angular Pressing (ECAP) and High-Pressure Torsion (HPT)

nanda
Download Presentation

Equal-Channel Angular Pressing (ECAP) and High-Pressure Torsion (HPT)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Creep and Superplasticity in Materials with Ultrafine Grain SizesTerence G. Langdon, University of Southern California, DMR 0243331 Equal-Channel Angular Pressing (ECAP) and High-Pressure Torsion (HPT) • ECAP and HPT are used to fabricate ultrafine-grained microstructures with grain sizes <1000 nm. • Hardness measurements demonstrate the development of homogeneity after processing: illustrations (right) show an inhomogeneous microstructure after 1 turn of HPT (upper) and a more homogeneous microhardness after 5 turns (lower). • Materials processed by ECAP and HPT are under evaluation for use in superplastic forming operations. Al-6061: P = 4 GPa, 1 turn Al-6061: P = 4 GPa, 5 turns M. Kawasaki, C. Xu and T.G. Langdon, “An Investigation of Cavity Growth in a Superplastic Aluminum Alloy Processed by ECAP,” Acta Materialia 53, 5353 (2005). C.Xu, Z. Horita and T.G. Langdon, “The Evolution of Homogeneity in Processing by High-Pressure Torsion,” Acta Materialia 55, 203 (2007). M. Kawasaki and T.G. Langdon, “Properties of Superplasticity in Ultrafine-Grained Materials,” Journal of Materials Science 42, 1782 (2007).

  2. Creep and Superplasticityin Materials with Ultrafine Grain SizesTerence G. Langdon, University of Southern California, DMR 0243331 Training • 2 graduate students (Megumi Kawasaki and Roberto Figueiredo) and 1 post-doc (Dr. Cheng Xu) are participating in this research. • Collaborations are in place with Kyushu University, Japan, and the University of Southampton, U.K. Impact • Invited lectures describing the results were presented at international conferences in Canada, Germany, Japan, Poland, Russia, Spain, U.K., U.S.A. • The P.I. co-organized conferences on Ultrafine-Grained Materials in Spain (2003); Charlotte, N.C. (2004); Japan (2005); San Antonio, TX (2006); Ufa, Russia (2007). • The post-doc (Dr. Cheng Xu) and student (Megumi Kawasaki) won awards for best oral presentations at the TMS Annual Meetings in Charlotte, N.C. (2004) and San Antonio, TX (2006). (From left) Megumi Kawasaki, Prof. Langdon, Dr. Cheng Xu and Roberto Figueiredo at the BNM-2007 International Symposium on Bulk Nanostructured Materials in Ufa, Russia, in August 2007

More Related