1 / 22

MUON Collaboration meeting at Mission Inn, Riverside, California January 27 - 30, 2004

MUON Collaboration meeting at Mission Inn, Riverside, California January 27 - 30, 2004. Development of the curved beryllium window. Stephanie Yang & Wing Lau – Oxford Steve Virostek & Derun Li -- LBL. A short summary of the FEA work carried out on the Beryllium Window. Summary

neka
Download Presentation

MUON Collaboration meeting at Mission Inn, Riverside, California January 27 - 30, 2004

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MUON Collaboration meeting at Mission Inn, Riverside, California January 27 - 30, 2004 Development of the curved beryllium window Stephanie Yang & Wing Lau– Oxford Steve Virostek & Derun Li -- LBL

  2. A short summary of the FEA work carried out on the Beryllium Window

  3. Summary A new window geometry has been developed with the aim to reduce the thermal stresses which were considered to be on the high side in the previous window geometry although they are still below the allowable stress limit. The new window has its intersection between the concave and the convex region shifted away from the edges, thereby making it slightly more flexible to allow freer thermal expansion. The pre-bow, before any thermal deformation, is kept to within 30mm which is considered to be acceptable to the cavity as far as space is concerned The new window geometry is shown in the next page. Three window thickness have been studied and all found to have achieved acceptable thermal stresses.

  4. Zoom in on high stress area Stress distribution: Max. approx 150 MPa Deflection due to thermal load. Max 1.72mm Linear static runs Window geometry: Diameter: 16cm; Thickness: 0.25mm Prescribed temp profile along window

  5. 1st mode shape of the 3-D model 2nd mode shape of the 3-D model 3rd mode shape of the 3-D model 4th mode shape of the 3-D model 5th mode shape of the 3-D model 1st mode shape of the 2-D model 2nd mode shape of the 2-D model 3rd mode shape of the 2-D model 4th mode shape of the 2-D model Summary of the natural frequency runs 5th mode shape of the 2-D model

  6. Summary Conclusion: By shifting the junction between the concave and the convex surface away from the rim, the revised geometry makes the window more flexible than the previous design. This is good news if the loading is purely thermal as it allows expansion to develop more freely, hence less thermal stresses; Comparing with the results shown in the previous window design which has concave radius larger than the convex radius, the current window has an increased bow and the reduced natural frequency. This indicates that the current window is more flexible; On a like with like comparison, the current window geometry has its peak stress almost halved, and if one opts for the 0.5mm thick window which expects a peak temperature of only 50C at the Window centre (See Steve Virostek’s memo), the peak thermal stress is less than 100 MPa which is well below the stress limit for this material; The natural frequencies are in general well below those obtained from the previous window geometry. This may or may not be acceptable for the physics requirement. Uni-directional bowing is expected even if the inner surface is at a higher temperature than the outer surface.

More Related