180 likes | 293 Views
E1 / T1 Series Product Introduction. WAN & LAN Bridge. Rack Mount Series. Rack Mount Series. Standalone Series. Standalone Series. ETU01-(A) ETU01-B(C) ETU02-MUX ETU-DXC. ERM01 ERM-MUX ERM-DXC. TTU01 TTU02-MUX. ET10A ET100. TRM01.
E N D
E1 / T1 Series Product Introduction
WAN & LAN Bridge Rack Mount Series Rack Mount Series Standalone Series Standalone Series ETU01-(A) ETU01-B(C) ETU02-MUX ETU-DXC ERM01 ERM-MUX ERM-DXC TTU01 TTU02-MUX ET10A ET100 TRM01 E1/T1 Access Units Over-view E1/T1 Access Unit Series E1 Solution T1 Solution Ethernet Solution
E1 Solution Standalone ETU01 ETU01-A • Supports Unframed E1 and Fractional E1 • Rack mountable for 19“or 23” standards • AC or DC models available • Modularized interface card – V.35, X.21. RS-232. RS-449, RS-530, G703/64k, Ethernet Bridging, Ethernet Routing, NRZ/BNC • N * 64K, up to 2,048Kbps • Complies with ITU-G.703,G.704,G.706,G.732 & G.823 • Status & Alarm LEDs on front panel Configuration by LCD menu or terminal port Configuration by the DIP Switch on the PCB SNMP and In-band remote control SNMP not supported
E1 Solution Standalone ETU01-B ETU01-C • Supports Unframed E1 and Fractional E1 • Rack mountable for 19“or 23” standards • AC or DC models available • Modularized interface card – V.35, X.21. RS-232. RS-449, RS-530, G703/64k, Ethernet Bridge, Ethernet Routing, NRZ/BNC • N * 64K, up to 2,048Kbps • Complies with ITU-G.703,G.704,G.706,G.732 & G.823 • Status & Alarm LEDs on front panel • Sub-E1 function • SNMP support & In-band remote control Configuration by LCD menu or terminal port Configuration by terminal port
Supports up to 4 different Data Ports (optional) • SUB-E1 is available for E1 Drop & Insert • Rack mountable for 19“ or 23” standards • AC or DC models • Interface module for – V.35, X.21. RS-232. RS-449, RS-530, G703/64k, Ethernet Bridge, Ethernet Router, NRZ/BNC • N * 64K , up to 2,048Kbps • Complies with ITU-G.703,G.704,G.706,G.732 and G.823 • Status and Alarm LEDs on front panel • Configuration by LCD Display or terminal port • SNMP optionally supported E1 Solution Standalone ETU02-MUX
19”, 1U Standard, Standalone or rack mountable. • 8 or 16 E1 ports for user selection. • E1 PCM31 or PCM30 64Kbps transparent cross connects. • System clock from internal oscillator or recovered from any E1. • Balanced E1 (120ohm) or unbalanced E1 (75ohm). • Complies with all ITU-T specifications. • Provides terminal port or user friendly NMP interface. • Configuration by terminal port • NMP Supported E1 Solution Standalone ETU-DXC
E1 Solution Rack Type ERM01 • Rack mountable for 19” or 23 ” Standard for CO side. • Capacity of up to 13 Fractional E1 cards, hot swappable. • High Density and Solid 4U Rack. • Two power card (AC or DC) for power sharing • Status & Alarm indications via LEDs on front panel • All connection ports on back panel • SNMP optional • Complies with ITU-G.703, G.704, G.706, G.732 and G.823 standards • Line Card Interfaces for – • V.35, X.21, RS-449, RS-530, G.703/64K, 10/100Base-T Ethernet Bridge, • Ethernet Router
E1 Solution Rack Type ERM-MUX • Central Multiplexer Solution in a Standard 19“ Rack. • Up to 10 I/O cards may be installed. • High density & compact design in a 4U high rack. • Hot Swappable cards and shared power supplies. • The configuration of timeslot#0 may be supported by E1A/E1B. • E1 local loop-back and remote loop-back. • E1 modes: Dual E1, Sub-E1 and Master/Slave mode. In Master/Slave mode, E1 • operates in main or backup mode, with automatic switchover in case of failure. • Standard console port allows terminal to setup and monitor operation locally. • WindowsTM based NMP management over the E1 link (one timeslot) to retrieve • remote alarm, for remote configuration, and remote status. Software included. No • extra hardware required (Ethernet or serial).
E1 Solution Rack Type ERM-DXC • Central Office E1 Digital Cross Connect Switching Solution in a Standard 19” Rack. • Up to 11 I/O cards may be installed. • High density & compact design in a 4U high rack. • Hot Swappable cards and shared power supplies. • 8xE1 per line card. • Standard console port allows terminal to setup and monitor operation locally. • Optional SNMP network management system card. • LED Line status and alarm display on each card. • Optional Power Source, AC or DC power supplies. • Complies with ITU-T G.703, G.704, G.706, G.732, and G.823.
LAN B LAN A Router Router E1 / T1 Transmission V.35/RS-449/X.21 RS-530/RS-232 I/F V.35/RS-449/X.21 RS-530/RS-232 I/F ETU01(A) (TTU01) ETU01(A) (TTU01) E1(T1) Single Data Port Application
E1 / (T1) Transmission E1 / (T1) Transmission E1 / (T1) Transmission 1E1(T1)/1 Data-port Application LAN A Broad Band Router ETU01(A) TTU01 Router ETU01(A) (TTU01) ET10/100 I/F V.35 I/F LAN B Broad Band Router ETU01(A) TTU01 ETU01(A) (TTU01) ET10/100 I/F V.35 I/F LAN C Broad Band Router ETU01(A) TTU01 V.35 I/F ETU01(A) (TTU01) ET10/100 I/F
LAN A LAN A ET100/V35 E1 / (T1) Transmission ET10/100 I/F V.35 I/F ETU01(A) (TTU01) ETU01(A) (TTU01) 1E1(T1)/1 Data-port Application
V.35 I/F V.35 I/F RS-449/530 I/F RS-449/530 I/F RS-232 I/F RS-232 I/F PLC X.21 I/F X.21 I/F E1 / (T1) Transmission Terminal RS-232 I/F LAN LAN RS-232 I/F SUB E1(T1) ET10/100 SUB E1(T1) ET10/100 ETU02 (TTU02) ETU02 (TTU02) E1(T1) Multi-Dataport Application
LAN M LAN A LAN L ET10/100 I/F CO Side ETU01(A) ( TTU01) E1 / T1 Transmission ERM01 (TRM01) Up to 13*E1(T1) ET10/100 CPE Side VLAN Switch LAN A Up to 13*Ethernet LAN M LAN L LAN A CO/CPE Application
ETU01/TTU01 ETU02/TTU02 Modular Solution Interface Module Economic Solution, no extra interface converter required
RS-449 I/F RS-530 I/F RS-232 I/F V.35 I/F X.21 I/F G703/64 I/F Module Solution
ET-10R I/F (Routing Module) ET-10/100 I/F (Bridge Module) Easy to install and remove NRZ I/F Module Solution
~ Quality Service Flexible CTC Union Technologies ~ The End