1 / 9

Rebuilding process for the Box Type Induction Furnace

Rebuilding process for the Box Type Induction Furnace. The sales and engineering departments review customer requirements for rebuilding their furnace. A used furnace can also be selected from the many furnaces in our used equipment inventory for rebuilding.

nowles
Download Presentation

Rebuilding process for the Box Type Induction Furnace

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Rebuilding process for the Box Type Induction Furnace

  2. The sales and engineering departments review customer requirements for rebuilding their furnace. A used furnace can also be selected from the many furnaces in our used equipment inventory for rebuilding.

  3. The furnace is completely disassembled. The frame is sandblasted and repaired.

  4. The furnace refractory top and bottom components are designed and manufactured.

  5. The coil is completely rebuilt or a new coil is designed and manufactured to match the customer’s requirements. Rebuilt coils are acid flushed and all coils are pressure tested at 120 psi minimum. Coils are tested for proper water flow.

  6. After the furnace is reassembled, a high alumina refractory grout is added to the coil to form the inside walls of the furnace. The molten metal leak detector sensors are installed in the bottom of the furnace.

  7. The completed furnace is mounted onto the stanchions. The furnace is tilted by an overhead hoist to insure proper mobility.

  8. The stanchions can be fitted with cylinders and hand controls to tilt the furnace hydraulically. Hydraulic cylinders are rebuilt or new cylinders are installed and pre-piped to the hydraulic control valve.

  9. CALL800-828-9799or 760-246-7333 fax: 760-246-4366 email: itc@inductiontech.com

More Related