1 / 17

Tektrim Installation

Tektrim Installation. Installing the UMB. Introduction. You will Learn the Easy Steps to Install the Tektrim UMB Base Tips for the Professional See actual Pictures of an Installation. What is the Height of the Finish Floor ? How Tall is Baseboard ? Add it Up to find the Height of the UMB.

oneida
Download Presentation

Tektrim Installation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Tektrim Installation Installing the UMB

  2. Introduction • You will Learn the Easy Steps to Install the Tektrim UMB Base • Tips for the Professional • See actual Pictures of an Installation

  3. What is the Height of the Finish Floor ? • How Tall is Baseboard ? • Add it Up to find the Height of the UMB. STEP 1 What Do I Need to Know ? • What is the Height of the Finish Floor ? • How Tall is Baseboard ? • Add it Up to find the Height of the UMB.

  4. Check the Plans • Find the Base Detail – In Our Example it is 4” Tall • Determine How High the Finish Floor Will Be From the Subfloor-In Our Example it is 0” • 4” + 0” = 4” , The Height at Which the UMB is Installed

  5. STEP 2 Preparing for Installation • Cut a Square Block, 4” by 4” • Use it as a Height Gauge to Set the UMB on

  6. STEP 3 Installation of the UMB • Measure , Cut and Install the UMB • Install the Same as Any Base

  7. STEP 4 Installing the Drywall • Set the Drywall Sheet on the UMB • Hold the Sheet Out at the Top • Use Your Knee Keep the Bottom on the Channel • Slide the Drywall into Channel

  8. STEP 5 Fastening the Drywall • Fasten the Drywall as you Always Do. • In Addition Put 2 Screws Between Studs Just Barely Above the Taping Flange into the UMB as Shown

  9. STEP 6 Tape the Joint • Whether you Use Screen or Paper Tape-Be Sure to Tape the Joint

  10. STEP 6 Apply Bonder • For Screen Tape Bonder After • For Paper Tape Apply Bonder First

  11. STEP 6 Tape and Finish Drywall

  12. A Job Well Done

  13. What You Can Do

  14. Tile

  15. Stone

  16. Stairs

  17. Tektrim Installation Installing the UMB Is Fast and Easy

More Related