1 / 35

XFEL Tuner

XFEL Tuner. Lorentz Force Detuning System Setup New Saclay design. General Remarks. Available today Old Saclay Tuner Simple Single Piezo fixture 150-200 Hz compensation Feedforward works well Piezo stacks Desirable Two piezo fixture Sensor-Actuator configuration

pandora-kramer
Download Presentation

XFEL Tuner

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. XFEL Tuner Lorentz Force Detuning System Setup New Saclay design Lutz Lilje DESY -MPY-

  2. General Remarks • Available today • Old Saclay Tuner • Simple Single Piezo fixture • 150-200 Hz compensation • Feedforward works well • Piezo stacks • Desirable • Two piezo fixture • Sensor-Actuator configuration • Future Option: Feedback on sensor piezo? • Bipolar operation to gain more stroke from Piezo • At cold stroke of piezo is smaller by up to a factor of 10… • … but the material is more forgiving • New Saclay Tuner Lutz Lilje DESY -MPY-

  3. General remarks II • Need engineering • Detailed study on forces at the piezo position • Cold force sensor built by H1 • Test in CHECHIA • Design of fixture/frame for 2 piezos • Selection of best Piezo supplier • Material • INFN works on that • Control system • Driver Amplifier modification for bipolar operation • Need automated procedures to setup Piezo • Collaboration with INFN • Detuning measurement • Preferably in one pulse • Warsaw colleagues are working on this Lutz Lilje DESY -MPY-

  4. Lorentz Force Detuning System Setup • Setup description • Single pulse compensation • Resonant excitation • Problems Lutz Lilje DESY -MPY-

  5. LP filter DOOCS server Chechia Function Generator PZD Amplifier Piezo actuator ADC PZM Amplifier Piezo sensor Amplifier Lock-in or Logarithmic Matlab Fgen.m Matlab chread.m Lorentz Force Detuning System Setup Lutz Lilje DESY -MPY-

  6. Piezo Driver Amplifier (PZD) • Specification: • Gain of the unloaded amplifier: –38 V/V (0.15), • Output voltage range from -160.9 V to +70 V,(voltage limiter) • Voltage offset: 0,11V • Output voltage rise and fall time: 200s (-160V  +60V) • Maximal pulse current 2A (1ms) • Capacitive load  1,5F Lutz Lilje DESY -MPY-

  7. Piezo Measurement Amplifier (PZM) • Specification: • Gain : 0.5 V/V, (adjustable), • Bandwidth: 100kHz, • Input impedance: 1k, • Output voltage range: ±5V, • Analog output 50 . Lutz Lilje DESY -MPY-

  8. Piezoelectric tuner IM. Liepe, S. Simrock, W.D.-Moeller Tuning mechanism Piezo Piezo-Actuator: l=39mm Umax=150V  l=3m at 2K fmax,static=500Hz He-Tank & Cavity Lutz Lilje DESY -MPY-

  9. Piezo Tuner setup II • Sensor-Actuator configuration • To compensate for Lorentz force detuning during the 1 ms RF pulse Feed-Forward • To counteract mechanical noise, “microphonics” Feed-Back Lutz Lilje DESY -MPY-

  10. Drawing of current setup (H.-B. Peters) Lutz Lilje DESY -MPY-

  11. RF signals at 35 MV/m Blue: With piezo Red: Without piezo Lutz Lilje DESY -MPY-

  12. Piezo excitation of the cavity for frequency compensation (operation for 700 hours) RF pulse (500us fill, 800us flat-top) Lutz Lilje DESY -MPY-

  13. Single pulse compensation Pulse Parameters: frequency = 219 Hz time delay = 0.84 ms amplitude = 95V Lutz Lilje DESY -MPY-

  14. MICROPHONICS Single pulse compensation Lutz Lilje DESY -MPY-

  15. Damping of the ringing between pulses (5Hz operation) RF pulse RF pulse RF pulse Lutz Lilje DESY -MPY-

  16. Blue: With piezo Red: Without piezo Frequency detuning of 500 Hz compensated voltage pulse (~100 V) on the piezo. No resonant compensation Frequency stabilization during RF pulse using a piezoelectric tuner Lutz Lilje DESY -MPY-

  17. Option: Resonant excitation of a mechanical cavity resonance • if one excites a mechanical resonance of a cavity with the piezo, one can use the cavity as an mechanical amplifier, so that a small stroke of the active element can compensate large detuning • we have shown that with the excitation of three periods of the mechanical resonance frequency, about 1000 Hz could be compensated Lutz Lilje DESY -MPY-

  18. Resonant excitation(stable for 200 hours) Pulse Parameters: frequency = 219 Hz time shift = -9.5 ms amplitude = 24V offset = 24V Lutz Lilje DESY -MPY-

  19. Resonant excitation Lutz Lilje DESY -MPY-

  20. Frequency stabilization at 35 MV/m Blue: With piezo Red: Without piezo Frequency detuning of ~1000 Hz compensated with resonant excitation of a mechanical cavity resonance at 230 Hz. NOTE: This is rather an demonstration of the capability of active tuning. Application in a real machine is probably difficult/impossible. Needs investigation. Lutz Lilje DESY -MPY-

  21. Module Measurements Lutz Lilje DESY -MPY-

  22. Single Piezo - Single Pulse Compensation • inside the module • f=200Hz, only 100Hz compensation Lutz Lilje DESY -MPY-

  23. Single Piezo - Resonant Lutz Lilje DESY -MPY-

  24. Problems with the active tuner • Fundamental problem: • Preload at operating temperature not defined • Large tuning needed for both cavities tested in CHECHIA (AC72, AC73) • ´natural´ frequency after tank welding is 780 kHz above 1,3 GHz • Normally this is more like 200-300 kHz • This results in a very large force tearing on the piezo fixture • Fixtures open up and piezos become loose Lutz Lilje DESY -MPY-

  25. Design by Karsten Gadow (H1) Available within 2-3 weeks Detailed measurement of the force in the cold environment Calibration will be first done to liquid nitrogen temperatures Then design a fixture with sufficient stiffness Force Measurement at the Piezo Position Lutz Lilje DESY -MPY-

  26. Problems with active tuning • Single Piezo fixture • So far only 100-200 Hz compensated (no resonant excitation of the cavity) • Achieved compensation at 1,3 GHz • Alternative: Resonant mechanical excitation of the cavity • Double Piezo fixture • Has only been operated at 1,3 GHz + 600kHz • Needs a stiffer design • Alternative: Put 2 single Piezo fixtures at different posts of the tuner • Bipolar operation of Piezos helps in any case • Check in CHECHIA and INFN Lutz Lilje DESY -MPY-

  27. Fixture Twist Problem  Fixture twistsduring operation Lutz Lilje DESY -MPY-

  28. Problems with active tuning • Automation is needed for operation of the piezos in the machine • Determination of optimum pulse shape • Interconnection to LLRF system Lutz Lilje DESY -MPY-

  29. Available piezos (1/2) • EPCOS • NOLIAC • Piezo Mechanik • Physical Instruments Lutz Lilje DESY -MPY-

  30. Mechanical Electrical Available piezos (2/2) Lutz Lilje DESY -MPY-

  31. New Saclay Tuner • Design by P. Bosland • More compact design possible • Cavity should be pre-tuned so that the tuner is not pushing • Piezo integrated • Available by the end of the year for first tests Lutz Lilje DESY -MPY-

  32. New Saclay Tuner 2 Lutz Lilje DESY -MPY-

  33. New Saclay Tuner 3 Lutz Lilje DESY -MPY-

  34. New Saclay Tuner 4 Lutz Lilje DESY -MPY-

  35. Conclusion • Proof-of-principle • Single-piezo • Non-resonant:100Hz in the module • Resonant: 200 Hz in the module • (We can use this in module 6!) • Double-piezo • Non-resonant: 400 Hz (not at 1.3GHz exact) • Resonant: 1kHz • Test of bipolar operation • Engeneering is needed • Choice of Piezo (-> together with INFN, IPN Orsay)) • Stiffer Piezo fixture/frame for 2 Piezos • Force measurement is underway (finished end 2004?) • LLRF integration • New Saclay tuner tests needed • Available end 2004 / beginning 2005 • Change of cavity pre-tuning desirable Lutz Lilje DESY -MPY-

More Related