1 / 23

geometric tolerances j. m. mccarthy fall 2003

ANSI Y14.5-1994 Standard. This standard establishes uniform practices for defining and interpreting dimensions, and tolerances, and related requirements for use on engineering drawings.. The figures in this presentation are taken from Bruce Wilson'sDesign Dimensioning and Tolerancing.. Tools for Measuring Dimensions.

paul
Download Presentation

geometric tolerances j. m. mccarthy fall 2003

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

    1. Geometric TolerancesJ. M. McCarthy Fall 2003 Overview of geometric tolerances Form tolerances Orientation tolerances Location tolerances Summary

    3. Tools for Measuring Dimensions

    4. Overview of Geometric Tolerances

    5. Symbols for Geometric Tolerances

    6. Feature Control Frame

    7. Reference Frame

    8. Order of Precedence

    9. Using a Feature as a Datum

    10. Material Conditions

    11. Straightness of a Shaft

    12. Straightness of a Hole

    13. Straightness of a Center Plane

    14. Flatness, Circularity and Cylindricity

    15. Parallelism Tolerance

    16. Perpendicularity

    17. Perpendicular Shaft, Hole, and Center Plane

    18. Angularity

    19. Position Tolerance for a Hole

    20. Material Condition Modifiers

    21. Position Tolerance on a Hole Pattern

    22. Datum Reference in a Composite Tolerance

    23. Summary

More Related