1 / 17

Oxyacetylene Process

Oxyacetylene Process. The Oxyacetylene Process. Oxyacetylene welding, commonly referred to as gas welding, is a process which relies on combustion of oxygen and acetylene. The Oxyacetylene Process.

pegeen
Download Presentation

Oxyacetylene Process

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Oxyacetylene Process

  2. The Oxyacetylene Process • Oxyacetylene welding, commonly referred to as gas welding, is a process which relies on combustion of oxygen and acetylene.

  3. The Oxyacetylene Process • Mixture of oxygen and acetylene is used as it is the only gas combination with enough heat to weld steel. • Steel melts at a temperature above 1,500 deg. C.

  4. Oxyacetylene • When mixed together a hot flame is produced with a temperature of about 3,200 deg.F.

  5. The Oxyacetylene Process • The chemical action of the oxyacetylene flame can be adjusted by changing the ratio of the volume of oxygen to acetylene. • Three distinct flame settings are used, neutral, oxidizing and carburizing

  6. Neutral Welding is generally carried out using the neutral flame setting which has equal quantities of oxygen and acetylene.

  7. Oxidizing The oxidizing flame is obtained by increasing just the oxygen flow rate

  8. carburizing The carburizing flame is achieved by increasing acetylene flow in relation to oxygen flow.

  9. Oxyacetylene Equipment • Oxygen and acetylene gases stored under pressure in steel cylinders. • Cylinders are fitted with regulators and flexible hoses which lead to the blowpipe. • Cont.

  10. Oxyacetylene Equipment • Safety devices such as flame traps are fitted between the hoses and the cylinder regulators.

  11. Protective Clothing

  12. Oxyacetylene Equipment • When welding, the operator must wear protective clothing and tinted colored goggles. • The flame is less intense than an arc and very little UV is emitted, general-purpose tinted goggles provide sufficient protection.

  13. Gas Welding Shield

  14. Brazing Vs. Welding • Brazing uses a brass filler rod, which melts at a much lower temperature. This allows you to easily join thin pieces of metal together. • Gas Welding uses mild steel filler rod, which allows for a much stronger bond.

  15. Brazing Vs. Welding • Brazing rod is gold in color. • Gas welding rod is copper colored.

  16. Demonstration Brazing

More Related