1 / 29

ENGINEERING GRAPHICS 1E9

ENGINEERING GRAPHICS 1E9. Lecture 3: Isometric Projections. What is ISOMETRIC?. It is a method of producing pictorial view of an object showing all three faces of the object simultaneously. It is a type of parallel projection It is a type of axonometric projection.

plugo
Download Presentation

ENGINEERING GRAPHICS 1E9

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ENGINEERING GRAPHICS1E9 Lecture 3: Isometric Projections

  2. What is ISOMETRIC? • It is a method of producing pictorial view of an object showing all three faces of the object simultaneously. • It is a type of parallel projection • It is a type of axonometric projection

  3. Axonometric Projections • Observer at infinity • Projectors parallel to each other and perpendicular to projection plane • Object is inclined with respect to projection plane

  4. Types of Axonometric Projections Isometric Projection Dimetric Projection Trimetric Projection

  5. Isometric Projections • All angles between axonometric axes are equal • The three coordinate axes of the object appear equally foreshortened (about 3/4th of true length) • The angles between any two of the three coordinate axes is 120°

  6. Isometric Terminology • The three coordinate axes are called isometric axes • Any line parallel to isometric axes is called isometric line • A  non-isometric line is a line not parallel   to   any   one   of   the three isometric axis • In isometric projection of cube, the faces of the cube and any plane parallel to them is called isometric planes

  7. Isometric Scale • True lengths of the edges of the object are equally foreshortened • Correct isometric projection can be drawn using an isometric scale (always smaller than ordinary scale)

  8. Isometric Drawing Isometric Projection: Drawing prepared with isometric scale on isometric axes Isometric Drawing: Drawing prepared with ordinary scale on isometric axes

  9. Steps: Step 1 Isometric sketches begin with defining isometric axes, three lines, one vertical and two drawn at 30° from the horizontal.

  10. Steps: Step 2 Three lines of the isometric axes represent the three primary dimensions of the object: width, height, and depth

  11. Steps: Step 3 Draw the font face of the isometric block.

  12. Steps: Step 4 Draw the rest of the isometric block.

  13. Steps: Step 5 Add details to the block starting from the front face. Then add details to the other faces.

  14. Steps: Step 6 Darken all visible lines to complete the isometric sketch. (make sure that construction lines are light)

  15. Axonometric projection shows all 3 dimensions, length, width and height. • The isometric lines are only drawn to scale. Objects composed entirely of isometric lines can be drawn by taking all measurements parallel to main edges of the enclosing box. • Non-isometric lines are drawn by transferring the ordinates (which are on isometric lines) of the end of the lines • Inclined and oblique surfaces are drawn using end coordinates. Box construction and offset measurements are common methods • In  an  isometric  drawing,  an angle never appears in its true size. Angles, irregular curves require special techniques

  16. Objects with Normal Surfaces Make an Isometric Drawing with corner A at the bottom

  17. Objects with Normal Surfaces

  18. NON-ISOMETRIC LINE Objects with Oblique Surfaces • Make an Isometric Drawing with corner A at the bottom

  19. Objects with Oblique Surfaces

  20. Objects with Non-isometric Lines • Make an Isometric Drawing with apex A facing front

  21. Objects with Non-isometric Lines Non-isometric lines are drawn with box construction and offset measurements Non-isometric lines are not drawn in true length in isometric drawing (BA is shorter than CA in this drawing)

  22. Irregular Objects • Make an Isometric Drawing of the following irregular object (pyramid)

  23. Irregular Objects • OA and OB offsets help to locate apex O • Complete box construction may not be needed in each case

  24. Objects with Circular Geometry A circle in a orthographic projection will appear as an ellipse in an isometric drawing. Instead of actual ellipses often approximate ellipses are drawn for isometric drawing. Four-centre ellipses are used to approximate ellipses on isometric planes. How to draw four-centre ellipse???

  25. Approximate Ellipse Draw  the  isometric centre  lines  of  the circle. Using  the  centre  lines,  draw an isometric square with sides equal to the diameter of  the  circle. From  the  near  corners  of  the  box,  draw two large arcs with radius R, using the two red points as centres. Draw the two smaller arcs with radius r, using two green points as centres.

  26. Cylinder

  27. Objects with Circular Geometry

  28. Objects with Non-Circular Curved Surfaces • Make an Isometric Drawing of the following curved object

  29. Objects with Non-Circular Curved Surfaces • A line that appears as a noncircular curve in a normal orthographic view of an object appears as a non-isometricline in an isometric drawing. • Curves may be drawn using a series of points by measuring along the normal lines in the  orthographic  view  (offset measurements) and  transferring  these points on isometric drawing. Accuracy increases with number of points.

More Related