150 likes | 449 Views
Atmospheric Dispersion Factors: What Are They and Why Do We Use Them? R. Brad Harvey, C.C.M. Theodore A Messier Marlboro, MA 978-568-2727 rbharvey@framatech.com. Atmospheric Dispersion Factors. Outline Components of an Atmospheric Dispersion Model Gaussian Plume Model
E N D
Atmospheric Dispersion Factors: What Are They and Why Do We Use Them? R. Brad Harvey, C.C.M. Theodore A Messier Marlboro, MA 978-568-2727 rbharvey@framatech.com
Atmospheric Dispersion Factors Outline • Components of an Atmospheric Dispersion Model • Gaussian Plume Model • Applications in the Nuclear Power Industry • Atmospheric Dispersion Factors (CHI/Q Values) as a Function of Averaging Time and Probability Level • References
Atmospheric Dispersion Factors Components of an Atmospheric Dispersion Model • Emissions • Source location • Source effective release height • Stack height plus plume rise • Source Emission Rate • Meteorology • Wind speed • Wind direction • Delta-temperature (stability class) • Receptor • Receptor location • Receptor height • Receptor pathways
Atmospheric Dispersion Factors Gaussian Plume Modeling Assumptions • Conservation of Mass • Dry Deposition • Decay in transit • Crosswind and Vertical Gaussian (Normal) Concentration Distributions • Hourly Dispersion Factors • Steady-State Meteorological Conditions • Continuous Emission Rate
Atmospheric Dispersion Factors Coordinate System Receptor coordinates: (x,y,z) Source coordinates: (0,0,H)
Emission and Downwind Factors Atmospheric Dispersion Factors Low Wind Speed High Wind Speed
Atmospheric Dispersion Factors Crosswind Factor
Atmospheric Dispersion Factors Vertical Factor
Atmospheric Dispersion Factors Resulting Basic Equation Concentration = emissions factor x downwind factor x crosswind factor x vertical factor • Simplifying assumptions: • Receptors at ground level (z=0) • Receptor beneath plume centerline (y=0)
Atmospheric Dispersion Factors Applications in the Nuclear Power Industry • Routine Releases (ODCM) • Design Basis Accident • Emergency Response
Atmospheric Dispersion Factors Applications in the Nuclear Power Industry
Atmospheric Dispersion Factors CHI/Q Values as a Function of Averaging Time and Probability Level
Atmospheric Dispersion Factors Potential Causes for Predicting Year-to-Year Variations in CHI/Q Values • Changes in Local Topography • Ground Cover, Nearby Buildings • Changes in Met Monitoring Program • Sensors, Calibration Procedures, Data Processing • Calibration Accuracy • WS ± 0.5 mph; WD ± 5 deg; Delta-T ± 0.1 deg C • Climatic Variability
Atmospheric Dispersion Factors How Often Should Meteorological Data be Updated? • Whenever there are changes to the met monitoring program or its nearby topography How Many Years of Met Data Should be Used in Dispersion Calculations? • RG 1.70 (1978): Two consecutive cycles, and preferably three or more whole years • ANSI/ANS-3.11 (2000): At least three to five years • DG-1111 (2001): Five years (minimum: one complete year)
Atmospheric Dispersion Factors References • Routine Releases (ODCM) • RG 1.111 • NUREG/CR-2919 (XOQDOQ) • Design Basis Accident • RG 1.145 • NUREG/CR-2858 (PAVAN) • Emergency Response • NUREG/CR-5247 (RASCAL 2.0) • RASCAL 3.0 (to be published)