270 likes | 385 Views
NWOSU ITV Department. ITV Instruction. Index. Basic screen Place call Dial manually Hang up Restart Volume. Computer Document reader VCR Auxiliary. The touch panel defaults to the Title Screen when a call terminates or the Polycom restarts.
E N D
Index • Basic screen • Place call • Dial manually • Hang up • Restart • Volume • Computer • Document reader • VCR • Auxiliary
The touch panel defaults to the Title Screen when a call terminates or the Polycom restarts. Return to Index
Basic Screen Return to Index
Place a Call Return to Index
To place a call, press the Place Call button. Return to Index
Select Address Touch the Pink arrows to scroll down to the desired address. (Addresses are listed in alphabetical order.) Return to Index
Select Address When touched, the pink arrows should turn blue. When selected, the address will be highlighted in a gold box. Return to Index
After you find the address press the Selectbutton and this will place your call. Return to Index
To dial a call manually Return to Index
Using the keyboard, type the address of the call to be dialed then press CALL Return to Index
If you are teaching, make sure the Near Instructor camera is selected so your students from the other sites can see you. Return to Index
Hang up the Polycom Return to Index
After class is over, always disconnect from the other sites. Press the Hang Up button (This should be done after every class). Return to Index
Restart the Polycom Return to Index
To restart the polycom, press theRestart Polycombutton. Return to Index
Touch the green square “Yes – Restart Polycom” Return to Index
After the Polycom restarts, it defaults to the Title Screen Return to Index
Volume control Return to Index
To turn the volume up in your classroom, press the button Return to Index
To turn the volume down in your classroom, press the button Return to Index
To use the computer, press the Computer button Return to Index
To use the document projector, press the Documentbutton Return to Index
If you want to use the VCR: • place a tape in the VCR • make sure the power is on • press “Play” on the VCR • select the VCRbutton on the screen • make sure students can see on both TVs (Video 1 or Video 2) Return to Index
The Auxiliary button will send what is on your laptop to the TV’s Plug your laptop into the RCA jack Return to Index
The End! Return to Start