210 likes | 291 Views
Environmental Equipment Inc. Agenda . WHO WE ARE WHAT DO WE DO OUR PRODUCTS WHAT IS OUR FUTURE. Who we are. IMR products are well known around the world IMR was founded in 1984 Our main product line is based on the monitoring of flue gases We have a strong presence in emerging markets
E N D
Environmental Equipment Inc. IMR Environmental Equipment, Inc.
Agenda • WHO WE ARE • WHAT DO WE DO • OUR PRODUCTS • WHAT IS OUR FUTURE IMR Environmental Equipment, Inc.
Who we are • IMR products are well known around the world • IMR was founded in 1984 • Our main product line is based on the monitoring of flue gases • We have a strong presence in emerging markets • We tribe on our long history of excellence and quality products IMR Environmental Equipment, Inc.
Who we are • Our products are always based on the latest technologies • There is not a request for a product specification that we cannot meet • Our technical support is among the best in the world • We are located at: 3634 Central Ave Saint Petersburg, FL 33711 USA IMR Environmental Equipment, Inc.
What we do • IMR specializes is the custom built of portable flue gas monitoring and stationary CEMS (Continuous Emission Monitoring System) • IMR product range goes from single sensor-cell hand-held instruments to multi-channel monitoring systems • IMR uses the latest technology in NDIR an electro-chemical sensors to measure flue-gas concentration IMR Environmental Equipment, Inc.
What do we do • We offer Engineering services • We have also created complete mobile measuring laboratories being used around the world IMR Environmental Equipment, Inc.
Our products • IMR2800 Series • IMR1400 Series • IMR1440C/FL Series • IMR1000 Series • IMR Measuring Instruments • IMR5000 / IMR400 units IMR Environmental Equipment, Inc.
Imr2800 series • Latest sensor technology for more accurate measurement and a longer life time • Continuously and simultaneously measuring up to 18 parameters • Can measure the combination following gases CO, O2, NO, SO2, HCl, N2O, CL2, H2, NH3, HC or H2S • Prepared for high temperature measurement (up to 2732 °F / 1500 °C) IMR Environmental Equipment, Inc.
Imr1400 series • Inexpensive general purpose unit • Can be programmed with special fuels • Can hold up to 4 sensors • Can measure the combination following gases CO, O2, NO, SO2, HCl, N2O, CL2, H2, NH3, HC or H2S • Prepared for high temperature measurement (up to 2732 °F / 1500 °C) IMR Environmental Equipment, Inc.
Imr 1440Fl/COFl Series • Designed with a high CO measurement range • Special flexible probe for hard to reach exhaust pipes • Measures air temperature, flue gas temperature, Oxygen O2, Carbon monoxide CO (H2 comp.), Nitric oxide NO, losses, excess air, combustion efficiency, draft, Carbon dioxide CO2 and soot • Optional: Soot Meter, RPM Meter, CDA100A Kit IMR Environmental Equipment, Inc.
IMR1000 series • The IMR 1000 is a hand held pocket size stack gas analyzer for combustion tests on boilers, burners, etc. The IMR 1000-1/IMR 1000-2 have up to two sensors with a 2-line LCD while the IMR 1000-3/IMR 1000-4 have a 4-line LCD with up to 3 sensors • small, rugged and easy to operate • up to 3 sensors • Memory • Infrared interface for a printer • Reliable technology and easy to service • Measures O2, CO, NO, Draft/pressure, and Stack gas temp • Calculates CO2, excess air, efficiency and CO air free(cor. to 0% O2) IMR Environmental Equipment, Inc.
IMR1050x SERIES • The IMR 1050X is a hand held pocket size stack gas analyzer for combustion tests on boilers, burners, etc. • small, rugged and easy to operate • up to 3 sensors • Infrared interface for a printer • 179 memory positions • CO readings to 1 ppm • User customizable parameters view • Measures CO, NO, CO2, Inlet Temp/Flue Temp, and Hi-Res Differential Manometer • Calculates O2, Efficiency, Net Temp/ Flue, Excess Air, Differential Temp/Pressure IMR Environmental Equipment, Inc.
IMR measuring instrument series • CDA100 Combustible gas leak detector • Adjustable tick rate • Tip Light in sensor cover illuminates the area of the leak • Audio and visual tick rate • DT301/DT302/DT304 Digital Thermometer • Temperature measurement with one (DT301) or two (DT302) inputs or four (DT304) inputs • Accepts K, J, T or E thermocouples • Time-stamped multifunction record • DFM3 Thermo Anemometer • Free rotating vane wheel ensures highest accuracy • Displays air velocity and temperature simultaneously IMR Environmental Equipment, Inc.
IMR measuring instrument series • IX616 Ambient Air Gas Detector • Multiple Gases O2, CO, H2S, CH4 • High and low alarms • TX450 Temperature Data logger • Type K, J, E, and T • Up to4 channels • DA75 Dust Emission Monitor • Continuous particulate monitor for emission control and arrestment plant performance monitoring. IMR Environmental Equipment, Inc.
IMR measuring instrument series • SOOTMETER Digital Soot Scale • Measures the soot number from 0.0 to 9.9 • More reliable than a paper scale • Approximately 100,000 measurements on one set of batteries • RLD10 Refrigerant Leak Detector • Adjustable tick rate • Automatically detects all existing refrigerants and blends • Audio and visual tick rate For more information regarding our IMR Measuring Instrument Series please visit our website: WWW.IMRUSA.COM IMR Environmental Equipment, Inc.
IMR5000 • The IMR 5000 is a state-of-the-art continuous flue-gas monitoring system, and is designed for a wide variety of flue-gas monitoring applications • The IMR 5000 is a stand-alone analyzer that works automatically. The rugged wall mounted enclosure meets NEMA type 4X (IP65) standards • The modular approach of the IMR 5000 allows one or more gases (up to 8) to be measured simultaneously. • The IMR 5000 uses the latest sensor technology from electro-chemical sensors up to NDIR benches IMR Environmental Equipment, Inc.
IMR 5000 • The system can analyze samples taken from up to 4 different sampling points. This sequential measurement is only possible with the addition of multiple gas sampling and conditioning devices (IMR 400) • The IMR 5000 offers various outputs such as a serial interface (RS232/RS485), an analog output (volt / current) and an alarm (relay) • All of the above features allow the IMR 5000 to be configured for a variety of applications and can easily be upgraded in the future. IMR Environmental Equipment, Inc.
IMR400 • The IMR 400 is a wall-mounted flue-gas dryer,and is designed to prepare flue-gases for a wide variety of gas monitoring applications • A stand-alone system that works automatically • The heated hose keeps the sample hotuntil it reaches the IMR 400 • The system then removes the water vapor with a permeation dryer or a peltier-cooler from the hot sample IMR Environmental Equipment, Inc.
IMR400 • The IMR 400 is designed to prepare flue-gases for the IMR 5000 flue-gas analyzing system • The IMR 400 is equipped with a 5 ft. (1.5m) heated sample line. This 'heated hose' ensures that the extracted sampledoes not cool down before it reaches the drying system IMR Environmental Equipment, Inc.
What is our future • We are expected to expand our customer base to emerging markets like: • Brazil • Chile • Argentina • Malaysia • China • Central America • And other emerging or developed markets IMR Environmental Equipment, Inc.