1 / 15

PRINTER CONFIGURATION GUIDE

PRINTER CONFIGURATION GUIDE. Scangle SGT-C2008 thermal printer. A. Scangle SGT-C2008 thermal printer USB Port installation. B. Scangle SGT-C2008 thermal printer USB Port configuration. C. To print test page. D. Configure the printer in the POS system.

rhoda-odonnell
Download Presentation

PRINTER CONFIGURATION GUIDE

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. PRINTER CONFIGURATION GUIDE Scangle SGT-C2008 thermal printer

  2. A. Scangle SGT-C2008 thermal printer USB Port installation B. Scangle SGT-C2008 thermal printer USB Port configuration C. To print test page. D. Configure the printer in the POS system

  3. A. Scangle SGT-C2008 thermal printer USB Port installation Step 1. Double click SGT-C2008 Driver.exe Step 2. Click Next

  4. Step 3. Click I accept the agreement Step 4. Click Install.

  5. Step 5. Click the Large button. Step 6. Click continue

  6. Step 7. Select Windows XP. Step 8. Click Next.

  7. Step 9. Click OK. Step 12. Click Finish.

  8. B. Scangle SGT-C2008 thermal printer USB Port configuration Step 1. Click Start. Step 2. Click Printers and Faxes.

  9. Step 3. Right click POS80 printer Step 3. Click properties.

  10. Step 4. Click Ports. Note : To check if the printer is properly printing click this button Print Test Page. Step 5. Pull down the ports. Step 6. Click check the USB001. Step 7. Click Apply.

  11. Step 8. Click OK. C. To print test page. Step 9. Click Print Test Page. Note : To check if the printer is properly printing click this button Print Test Page.

  12. D. Configure the printer in the POS system Step 1. At the cashier window. Click System setup. Step 2. Input the admin/supervisor user name and password. Step 3. Click OK.

  13. Step 4. Click Printing. Step 5. At the System Printer select Epson.

  14. Step 6. At the System Printer Name select POS80. Step 7. Click Save. Then Click OK. You can now use the printer.

  15. THANK YOU! www.tanaytechnologies.com Date created : 03-08-2012

More Related