1 / 12

Configuration Guide ---for Alarm device

Configuration Guide ---for Alarm device. Content. Environment of installation. Function of device. Smartlink for Camera. Connection with APP. Function for Device.

jacquest
Download Presentation

Configuration Guide ---for Alarm device

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Configuration Guide ---for Alarm device

  2. Content Environment of installation Function of device Smartlink for Camera Connection with APP

  3. Function for Device The alarm device for the Smart Home IP Camera, it include Door sensor, Remote controller, PIR Sensor, Window sensor, Smoke detector, Gas detector and so on; The main function for those device is to work with the Camera by APP to provide a more safety living environment .It can be management and control by APP. Which also can send alarm message to you mobile phone when the APP is enable. 1

  4. Environment of installation Below is the suitable environment for the alarm device: *Remote control :no limited *Door sensor :on door, window, cabinet *PIR sensor :living room, bedroom… *Smoke detector :kitchen

  5. Remote Controller *Function 1. Two lock button open the button of lock, which means enable defense function of the camera and all the alarm device. Otherwise, if you closed it, then you will not received the alarm message. 2. SOS button press this button, it can send alarm message when some need help. Such as the aged was fall down. 2

  6. Door Sensor *Function When the door was opened, it will push the alarm message to your APP or by email. 3 Connection: Step1:Open the black button firstly at the bottom of door sensor Step2:Separately the door sensor for alarm testing

  7. C. PIR Sensor *Function Once detect the PIR( Pyroelectric Infra Red), it will send the alert to APP. There also has the type of device pets (with 35kg),it will not detect it when it in the defence area. Connection: Step1:open/turn on the black button Step2:when the light on, put the sensor close to the human body for testing 4

  8. C. Smoke Detector *Function Once detect the smoke from the house, it will be alert and send message to APP. Connection: Step1: Click the red button until heard a alarm sound like “Di Di Di …” 5

  9. C. Window Sensor *Function If the window was opened when you are not at home, it will be alert and send message to APP. 6

  10. How to connect the alarm device with APP Step1: Choose the selection of setting- Choose “Alarm settings” enable the optional of receive Alarm, Buzzer or Motion detection  

  11. Step2: choose “Defense Area Settings”, according to the type of device to add the alarm device. Note:the device support 8pcs remote controller,8*8=64 alarm device(RF433),support 8 groups. The method for connection as below: if need to install 1pcs door sensor at Hall, number it as 1.firstly need to choose Hall, then click the number 1,it will show the dialog box ,then choose “Sure/OK”, and enable the alarm device (For example of door sensor, just need separate it). If it is connected, the grey color number will become wathet blue, and will show the dialog box for “operate successfully”.  

  12. D N E Smartlink for Camera Step1: Enable Yoosee. please use your email address or mobile number for register, then login the APP. After login, please click “+” on the top right corner choose “Smartlink” choose “Next” waiting for connection. if it connect successfully, please input the default password “123”;After add the device, please click the icon of red shield to change the default PSW.

More Related