1 / 8

Road to SiD Test beam at LNF (Frascati) BTF 23 – 30 June.

Road to SiD Test beam at LNF (Frascati) BTF 23 – 30 June. 22 June DEAD LINE. July. March. April. May. June. June : Assembly of electronics parts over the PCB (APV25 connector, BIAS circuit etc). 12-30 May: Last usefull period for wire-bonding SiD over the PCB (without Patch).

rocio
Download Presentation

Road to SiD Test beam at LNF (Frascati) BTF 23 – 30 June.

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Road to SiD Test beam at LNF (Frascati) BTF 23 – 30 June. 22 June DEAD LINE July March April May June June: Assembly of electronics parts over the PCB (APV25 connector, BIAS circuit etc) 12-30 May: Last usefull period for wire-bonding SiD over the PCB (without Patch) March: Set-up the DAQ acquisition system. April: design and assembly the frame for the SID. Work on SIDPatch Board ( if they are ready) TEST BEAM (23-29 June) Fulvio De Persio

  2. DAQ Sistem BackPlane + APV25 Controller + Trigger Generator + Pulse generator USB-VME Upgrade : From Stand-Alone FPGA to a VME FPGA Test Board MPD PC

  3. APV25 Response at 1 pulse MIP 1 2 3 4 5 25 APV25 boards to Test ( we need 20 APV25 board for the test in June) Test cables, connection, backplane and adaptors.

  4. Frame for SiD SiD Customizable Bosch Aluminum Rail for the SiD frame (Prototype)

  5. Silicon Patch Board

  6. Possible Problems 16 mm 8 mm Custom Design maximum active area from a 6” Wafer Short Bonding ≈ 4 mm OK! Long Bonding ≈ 8 – 16 mm (Problems: possible wire collapsing, wire tilts, with shorts as a consequence)

  7. Silicon Patch Board design B300 B200 B300 B100 SiD SiD B100 Specific: 300 µm thickness 50 µm pitch (as SiD) Made by FBK foundry (Trento, Italy) Mask Design is already done Arrival time:May Fulvio De Persio

  8. Assembly Improvements: Improved planarity of PCB Improved stability of the SiD holder during the wire bonding. Assembly time: 3 weeks for glue SiD on the PCB and the wire bonging of the SiD strips. (May) Add the Polarization circuit and test SiD polarizazion. (early June) Assembley of male connector for connect PCB and APV25 boards. (mid June) Everything has to be ready for the 22 June!!!!!

More Related