1 / 20

Your Compound Light Microscope

Your Compound Light Microscope. Color in your microscope as we list the parts. #9 EYEPIECE. #2 REVOVING NOSEPIECE. #3 Low power or scanning lens Medium power objective High power objective. #11 STAGE. #6 Stage clips. #8 SUBSTAGE ILLUMINATOR. #7. DISC DIAPHRAGM.

rodriguezmichael
Download Presentation

Your Compound Light Microscope

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Your Compound Light Microscope Color in your microscope as we list the parts.

  2. #9 EYEPIECE

  3. #2 REVOVING NOSEPIECE #3 Low power or scanning lens • Medium power objective • High power objective #11 STAGE #6 Stage clips

  4. #8 SUBSTAGE ILLUMINATOR

  5. #7 DISC DIAPHRAGM

  6. #1EYEPIECE TUBE #15 MONOCULAR HEAD #10 ARM #17 TENSION CONTROL RING #16 STAGE SAFETY STOP SCREW #12 COARSE ADJUSTMENT #18 0N-OFF SWITCH #13 FINE ADJUSTMENT #14 BASE

  7. Nine Procedures for putting away the Light Compound Microscope! WARNING!!! Failure to follow the above guidelines will result in advancement on the disciplinary plan!!

  8. 1. Turn off light!

  9. Remove Slide from Stage

  10. 2a. Discard coverslip in wastebasket

  11. 2b. Clean and dry slide and put away neatly!

  12. Place stage clips parallel to the edge of stage

  13. Make sure low/scanning power objective is locked into place

  14. Turn stage all the way DOWN. Do NOT force the adjustment knobs. Stop turning when you feel resistance!

  15. 6. Wrap the cord snugly around the base of the arm and substage illuminator.

  16. Make sure the eyepiece tube is inline with the arm!

  17. Wait for inspection and THEN place dust cover on microscope. Make sure it goes all the way down!

  18. 9. Place micro-scope on shelf in proper place with the HEEL facing you!!

  19. AND'S THAT'S IT!

More Related