BASIC OPERATOR TRAINING

BASIC OPERATOR TRAINING Use of Micrometers

Click below for introduction

By now, you’ve had some instruction on how to read customer drawings. You’re starting to get an idea of what our customer expects us to deliver. So, how do we know that our product will meet our customer’s specifications? We use micrometers and other measuring instruments to determine if our product is to print.

Features of the Micrometer • Body – Houses the components • Splines – Used to measure part • Dial – Used to turn splines • Digital Readout – Indicates reading • Zero Button – Zero’s micrometer

Splines DigitalReadout

Dial Body Zero Button

In the following slide, you will see an operator place the crimp between the splines. He will then turn the large dial down until just before the splines make contact. He then turns the small dial in until he hears 3 clicks (listen closely for the 3 clicks in the video).

Click on picture to view video

This concludes our lesson. Click below for further information on specifications and care of the micrometer. http://www.mitutoyo.com/

BASIC OPERATOR TRAINING

BASIC OPERATOR TRAINING

Presentation Transcript

Driver Operator Refresher Training

Forklift Operator Training

Transfer Station Operator Training

UST Operator Training

Drinking Water Operator Training

BASIC TRAINING

Basic Training

BASIC TRAINING

Machine Operator Training

Class C Operator Training

Operator Training and Safety

NOMAD Operator Training

CMS Operator Training

MEPCOM Operator Training

Drone Operator Training

SecurColor Operator Training

OPERATOR TRAINING

FORKLIFT OPERATOR SAFETY TRAINING

Forklift Operator Training

Basic Training

800 MHz Operator Training