1 / 39

Overview of HAZCOM & Lab Safety Training

Overview of HAZCOM & Lab Safety Training. Hazardous Communication Chemical Hygiene Plan - Chemical Storage - Avoidance of Routine Exposures - Behavior in the Laboratory Personal - Habits in the Laboratory Housekeeping Examples of Laboratory Accidents Chemical Waste Procedures

rowdy
Download Presentation

Overview of HAZCOM & Lab Safety Training

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Overview of HAZCOM & Lab Safety Training • Hazardous Communication • Chemical Hygiene Plan - Chemical Storage - Avoidance of Routine Exposures - Behavior in the Laboratory Personal - Habits in the Laboratory • Housekeeping • Examples of Laboratory Accidents • Chemical Waste Procedures • Incident Reporting SDSM&T Environmental Health & Safety

  2. HAZCOM - What is it? • Standard issued by OSHA • Ensures that employers are communicating and identifying physical and health hazards associated with hazardous chemicals in the workplace to the employees (YOU) • Office of Risk Management requires HAZCOM in SD. SDSM&T Environmental Health & Safety

  3. Labels • What do labels tell us about the chemical? Name of Material Health Hazards Supplier’s Name/Address Physical Hazards Much More SDSM&T Environmental Health & Safety

  4. Importance of Labeling • To identify hazards in your • work area. • Labels must be on every bag, barrel, bottle, box, can, cylinder, drum, storage tank, etc. • NFPA ratings should be on each container via the Chemistry Storeroom. • Notify your supervisor or safety representative if there are no labels on a container. SDSM&T Environmental Health & Safety

  5. What are Physical Hazards? • Flammable • Combustible • Compressed Gas • Oxidizer • Unstable • Water Reactive SDSM&T Environmental Health & Safety

  6. What are Health Hazards? Carcinogens Teratogens Asphyxiates Corrosives Irritants Sensitizers Toxic Target Organ Effects SDSM&T Environmental Health & Safety

  7. How Chemicals Enter the Body • Ingestion – swallowing the chemical • Inhalation – breathing in the chemical • Absorption – chemical soaks through the skin SDSM&T Environmental Health & Safety

  8. Corrosives • A chemical that causes visible destruction of or irreversible alterations of living tissue by chemical action at the site of contact. • Amines, Acids SDSM&T Environmental Health & Safety

  9. “Target Organ” Chemicals • A chemical capable of adversely affecting a specific “target organ” of the body. • Capable of adversely affecting one or multiple organs of the body. • Xylene - Kidney, Liver, Central • Nervous Systems • Isocyanates - Lungs. SDSM&T Environmental Health & Safety

  10. Oxidizers • Reactive chemical that releases oxygen and accelerates combustion. • They may be corrosives, irritants, toxins, sensitizers, etc. • Oxygen, peroxides. SDSM&T Environmental Health & Safety

  11. Poisons/Toxics • Poisons are likely to cause death or serious injury if they are swallowed, inhaled, or come in contact with the skin. May interfere with oxygen distribution in the bloodstream. • Can enter the body through inhalation, absorption, or ingestion. • Methanol, carbon monoxide SDSM&T Environmental Health & Safety

  12. Carcinogens • A substance capable of causing or producing cancer in humans or animals. • Exposure to a carcinogen can, over time, cause changes in cell division within the body that leads to uncontrolled cell growth. • Formaldehyde, crystalline • silica, benzene SDSM&T Environmental Health & Safety

  13. HMIS/NFPA Codes SDSM&T Environmental Health & Safety

  14. HMIS/NFPA Labeling What is the difference? HMIS NFPA • Diamond Shaped • Address hazards presented by short-term, acute exposures to a material during handling under conditions of fire, spill, or similar emergencies. • Rectangular shaped • Address acute occupational exposure • “PPE Section” is at the bottom • Bottom section is used to indicate special hazards SDSM&T Environmental Health & Safety

  15. NFPA - Special Hazards • Diamond shaped labels include a fourth hazard class called Special Hazards. This hazard class is colored WHITE. • These special hazards are represented by the following symbols: • Water Reactive • OX – Oxidizer • Radioactive COR – Corrosive ACD – Acid ALK - Alkali SDSM&T Environmental Health & Safety

  16. HMIS • Personal Protective Equipment • Ranges from A to K (pictograms) A - Safety Glasses B - Safety Glasses and Gloves C - Safety Glasses, Gloves, Apron D - Safety Glasses, Face Shield, Gloves, Apron E - Safety Glasses, Gloves, Dust Respirator F - Safety Glasses, Gloves, Apron, Dust Respirator SDSM&T Environmental Health & Safety

  17. HMIS • Personal Protective Equipment G - Safety Glasses, Gloves, Dust and Vapor Respirator H - Splash goggles, Gloves, Apron, Dust and Vapor Respirator I - Safety Glasses, Gloves, Dust and Vapor Respirator J - Splash goggles, Gloves, Apron, Dust and Vapor Respirator K - Airline Hood or Mask, Gloves, Full Suit, and boots SDSM&T Environmental Health & Safety

  18. Material Safety Data Sheets • Data sheet containing information about the hazards associated with a chemical. • Required by Occupational Safety and Health Administration (OSHA). • All manufacturers, distributors, and consumers must have MSDS. • All hazardous materials MUST have a corresponding MSDS.

  19. MSDS Information • CHEMICAL & COMPANY IDENTIFICATION • COMPOSITION/INFORMATION ON INGREDIENTS • INFORMATION ON EXPOSURE LIMITS • PHYSICAL AND CHEMICAL CHARACTERISTICS • PHYSICAL & HEALTH HAZARDS • PRIMARY ROUTES OF ENTRY INTO BODY • EMERGENCY AND FIRST AID • FIRE FIGHTING MEASURES • ACCIDENTAL RELEASE MEASURES • PERSONAL PROTECTION • SUGGESTIONS FOR STORAGE • DISPOSAL CONSIDERATIONS • OTHER REGULATORY INFORMATION

  20. Know Your Area • Know the hazards associated with the chemicals you are working with. • Know what Personal Protective Equipment (PPE) to wear in order to protect yourself from the hazards. • Learn the Emergency Procedures. (Do you have a procedure???) • Know the location of the MSDSs in your area. SDSM&T Environmental Health & Safety

  21. CHEMICAL HYGIENE PLAN SDSM&T Environmental Health & Safety

  22. 6.3 STORAGE • Keep amounts to a minimum • Labeling – name, date, and hazard info (if bottle is too small name or structure and date will be sufficient • Date chemicals – received/opened • Compatible containers. • Closed containers. • Flammables –flammable materials cabinet or refrigerator designed for flammable liquid. • Compressed gas cylinders shall be properly secured at all times. Cylinder caps shall be in place on cylinders when not in use. Use straps, chains, or stands to support the cylinders. SDSM&T Environmental Health & Safety

  23. We had an explosion in a lab that could have killed people and burned down a chemistry building.  It took place in a separate room in a new building protected by sprinklers rather that in the old lab where it would have been in the lab with people and no sprinkler system. I have pictures (digital) that I can send if you would like. They sure helped convince our faculty. We had solvent stills in the room but they were a new safer type and that has also convinced people that these are worth the money as they survived the explosion. Exploding Refrigerator University: University of Virginia Year: ~1997 or 1998 Description of Incident: Normal household refrigerators have several spark points that caused an explosion from built up fumes. SDSM&T Environmental Health & Safety

  24. Peroxide Explosion • University: University of California (Davis or Berkeley) • Year: ~2006 • Description of Incident: Undergraduate was completing research using a rotovap to remove organic solvents from an azobenzene precipitate. After adjusting the bottom flask, it exploded sending glass into her face and torso. It was determined that the most probable cause was peroxide formation by the tetrahydrofuran (THF) used in the reaction. The THF was tested and found to have elevated peroxide levels. SDSM&T Environmental Health & Safety

  25. 6.3 STORAGE CONT. • Incompatible chemical segregation • Acids • Bases • Flammables • oxidizers • Water reactive • No food in chemical refrigerator. • Proper labeling of refrigerator. • Highly toxic materials should be secured. • Questions - Chemistry Storeroom and/or Campus EHS Manager. SDSM&T Environmental Health & Safety

  26. 5.2 BEHAVIOR IN THE LABORATORY • Workers shall act in a professional manner at all times. • Horseplay and practical jokes are forbidden. • No undergraduates are allowed to work in a lab alone. The institution also highly discourages graduate student work alone in laboratories, especially after business hours. • Visitors should be supervised. • Contact information should be posted on all laboratory doors. If an experiment is being run unattended, this information must cover the proper contact information in case of a catastrophic failure. • Awareness of Safety Equipment. • Contact EHS if radioactive materials will be used. SDSM&T Environmental Health & Safety

  27. Lab Fire University: University of California – Santa Barbara Year: Mid 1990s Description of Incident: Plumber turned off water to repair faucet leak upon approval from lab employees. Lab personnel did not know that another employee had started a UV-photolysis of a solvent-containing reaction in a closed box. The photolysis required constant cooling water flow to prevent the apparatus from over-heating. After a few minutes with no cooling water flow, the organic solvent burst into flames and began to spread to the wooden box. Fortunately, the plumber – now alone – quickly extinguished the blaze with the lab’s fire extinguisher. SDSM&T Environmental Health & Safety Example of water-flow measuring device with automatic electrical power shutoff.

  28. 5.3 AVOIDANCE OF ROUTINE EXPOSURES • Skin contact with chemicals should be avoided. • Do not smell or taste chemicals. • Do not pipette by mouth; use a vacuum or pipette bulb. • Vent any experiment that may discharge toxic or noxious chemicals into a local exhaust device, (i.e., a chemical fume hood). • Flammable, corrosive or toxic volatile materials must be trapped when they are evaporated. SDSM&T Environmental Health & Safety

  29. 5.4 PERSONAL HABITS IN THE LABORATORY • Eating, drinking, gum chewing and cosmetic application • Ice usage • Frequent hand washing • Hair must be confined • Shoes that cover the entire foot are required at all times. • Appropriate attire • Eye Protection • Report unsafe conditions • Spills SDSM&T Environmental Health & Safety

  30. Liquid Nitrogen Explosion University: Texas A&M Year: ~2006 Description of Incident: Internal Pressure Relief Device Removed for Liquid Nitrogen Tank causing a pressure build up. SDSM&T Environmental Health & Safety

  31. Liquid Nitrogen Explosion Cont. SDSM&T Environmental Health & Safety

  32. 5.5 HOUSEKEEPING • Lab areas are to be kept clean and uncluttered. This will help prevent spillage, breakage, personal injuries and unnecessary contact with chemicals. • Contaminated glassware should be cleaned daily. • Spills shall be cleaned up immediately from work areas and floors. • Doorways and walkways within the lab shall not be blocked or used for storage. • Floors shall be maintained dry at all times. • Access to exits, hallways, emergency equipment, and utility controls shall never be blocked. • Chemical containers shall be properly emptied and cleaned prior to disposal. (Triple-rinsing) • Equipment and instrumentation shall be cleaned to remove spillage and contamination before repair or calibration service is requested and service personnel will be informed of any hazardous contamination prior to servicing. SDSM&T Environmental Health & Safety

  33. Chemical Waste Disposal • http://sdmines.sdsmt.edu/hazwaste SDSM&T Environmental Health & Safety

  34. Incompatible Waste Explosion • University: University of Kentucky • Year: 1997 • Description of Incident: It is believed that nitric acid and halogenated organic solvent waste were involved, but the exact cause may never be known. SDSM&T Environmental Health & Safety

  35. Incident Reporting • http://sdmines.sdsmt.edu/incident SDSM&T Environmental Health & Safety

  36. References • OSHA Hazard Communication. - 1910.1200 http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=standards&p_id=10099 • Occupational exposure to hazardous chemicals in laboratories. - 1910.1450 http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=standards&p_id=10106 • http://ehs.ucdavis.edu/ucih/pages/lessons.cfm • http://www.chem.purdue.edu/chemsafety/NewsAndStories/RefrigStories.htm SDSM&T Environmental Health & Safety

  37. Additional Information SDSM&T Environmental Health & Safety

  38. Flammable Definition • Flammable" means a chemical that falls into one of the following categories: • (i) "Aerosol, flammable" means an aerosol that, when tested by the method described in 16 CFR 1500.45, yields a flame projection exceeding 18 inches at full valve opening, or a flashback (a flame extending back to the valve) at any degree of valve opening; • (ii) "Gas, flammable" means: (A) A gas that, at ambient temperature and pressure, forms a flammable mixture with air at a concentration of thirteen (13) percent by volume or less; or • (B) A gas that, at ambient temperature and pressure, forms a range of flammable mixtures with air wider than twelve (12) percent by volume, regardless of the lower limit; • (iii) "Liquid, flammable" means any liquid having a flashpoint below 100 deg. F (37.8 deg. C), except any mixture having components with flashpoints of 100 deg. F (37.8 deg. C) or higher, the total of which make up 99 percent or more of the total volume of the mixture. • (iv) "Solid, flammable" means a solid, other than a blasting agent or explosive as defined in 1910.109(a), that is liable to cause fire through friction, absorption of moisture, spontaneous chemical change, or retained heat from manufacturing or processing, or which can be ignited readily and when ignited burns so vigorously and persistently as to create a serious hazard. A chemical shall be considered to be a flammable solid if, when tested by the method described in 16 CFR 1500.44, it ignites and burns with a self-sustained flame at a rate greater than one-tenth of an inch per second along its major axis. • OSHA Hazard Communication. - 1910.1200 SDSM&T Environmental Health & Safety

  39. Carcinogen • 1910.1200(g)(2)(vii) • Whether the hazardous chemical is listed in the National Toxicology Program (NTP) Annual Report on Carcinogens (latest edition) or has been found to be a potential carcinogen in the International Agency for Research on Cancer (IARC) Monographs (latest editions), or by OSHA; SDSM&T Environmental Health & Safety

More Related