1 / 27

Platelets Aggregation

General Approach in Investigation of Haemostasis. Platelets Aggregation. Studying Platelets Disorders. Numbers CBC PLT Count PLT Morphology Function Bleeding time (BT) Platelet aggregation Whole blood aggregation platelet-rich plasma aggregation.

rwunderlich
Download Presentation

Platelets Aggregation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. General Approach in Investigation of Haemostasis Platelets Aggregation

  2. Studying Platelets Disorders • Numbers • CBC • PLT Count • PLT Morphology • Function • Bleeding time (BT) • Platelet aggregation • Whole blood aggregation • platelet-rich plasma aggregation

  3. Platelets Contribute To Hemostasis In Two Main Ways: • Primary haemostatic plug : • Adhesion • Aggregation • Secretion • Secondary haemostatic plug: • Procoagulant activities are generated

  4. Platelet Plug Formation: Adhesion • Platelets bind to exposed adhesive subendothelial connective tissue • Collagen • Vwf • Fibronectin • Mechanism components • Vwf: links PLT to endothelial binding site • PLT receptor gpib • Collagen fibers • Actin contracts & pseudopods form • Reversible • Facilitates activation

  5. Platelets aggregation • Platelet-Platelet interaction • Mechanism components • ATP • Ionized calcium • Fibrinogen • PLT receptor GPIIb/IIIa • Initial aggregation – REVERSIBLE • Secondary aggregation – IRREVERSIBLE* = white clot, also know as platelet plug formed. * The transformation of irreversible aggregated platelets into a mass of degenerative platelet material without membranes is termed viscous metamorphosis. (by platelet lysosomes)

  6. 28

  7. Why Platelet Aggregation Testing • Evaluation of suspected hereditary and acquired disorders of platelet function. • Platelets normally contain three major types of granules . • The alpha granules contain fibrinogen, pf4, factor v, von willebrand factor…. • The dense granules contain adp or atp, calcium and serotonin. • Lambda granules – similar to lysosomes and contain several hydrolytic enzymes. • Hereditary platelet function disorders includes • Rare defects of adhesion (bernardsoulier syndrome) • Rare defects of aggregation (glanzmannthrombasthenia) • More common defects of secretion (alpha or dense granule deficiency, aspirin-like defects, or other primary secretion defects). • Acquired platelet function disorders are more common than the hereditary disorders and include drug-induced platelet dysfunction (including aspirin, NSAID’s, clopidogrel, antibiotics, various cardiovascular and psychotropic drugs), uremia, and myeloproliferative disorders.

  8. Principle • Using aggregating agents to induce platelet aggregation or cause platelets to release endogenous ADP, or both. • Platelet aggregation is studied by means of a platelet aggregometer, used principle: • Photo-optical Method • Luminescence Technology (Platelet Lumiaggregometry) • Electrical Impedance Method

  9. Aggregating Agents

  10. Electrical Impedance Method • These types of analyzers may use citrated whole blood, as the test sample. • As platelets aggregate, the coat an electrode, impeding the electrical current through the analyzer. http://www.platelet-research.org/3/pfa.htm

  11. Luminescence Technology (Platelet Lumi Aggregometry) • The lumi-aggregometer may be used to simultaneously measure platelet aggregation and secretion. The instrument records both aggregation and secretion of dense-granule ATP. • The ATP is measured by its reaction with firefly luciferin to give chemiluminescence. The resulting light emission is detected, amplified, and recorded by the instrument. • Performed by using whole blood or PRP. • This modification of aggregation is particularly sensitive to ATP release, and is as sensitive measure of platelet activation. [A] + [B] → [AB◊] → [Products] + light

  12. Photo-optical Aggregometer (PLT Aggregometry Using PRP) • The Platelet-rich plasma, which is turbid in appearance, is placed in a cuvettes, warmed to 37°C in the heating block of the instrument, and stirred via a small magnetic bar. • Baseline light transmittance through the platelet-rich plasma is recorded. The addition of an aggregating agent causes the formation of larger platelet aggregates with a corresponding increase in light transmittance, because of a clearing in the platelet-rich plasma. The change in light transmittance is converted to electronic signals and recorded as a tracing by the chart recorder.

  13. Patient Sample – 3.2% citrated WB • Approximately 20 ml of blood is needed for a full Aggregation Study. • Test Sample – PRP ( Platelets count fall (200–600 × 109/L) • Principle – photometry: optical density of PRP warmed to 37° C is determined before and after the addition of various aggregating agents • Issues • Sample quality is critical • Fibrinogen levels are important • Agonists must be prepared fresh daily • Thrombocytopenia makes result interpretation difficult • Complete patient history is essential Figure 1 - Platelet-rich plasma in an optical aggregometer. Platelet count is approximately 200 × 109/L, and platelets are maintained in suspension by a magnetic stir bar turning at 1000 rpm. (Courtesy of Kathy Jacobs, Chronolog, Inc., Havertown, PA.) Figure 2 – Five possible phases of PLT aggregation: 1) baseline, 2) agonist addition and shape change, 3) primary wave, 4) secretion, and 5) secondary wave. http://www.platelet-research.org/3/aggregometry.htm

  14. Procedure: • Switch on aggregometer to warm to 37°C. Select AGGR TEST • Select the type of agonist (ADP, AA, RISTO, THR, COLL, ADR) • Place 0.27 ml PRP in a test cup and put in the incubation channels. Put beads into the cups, wait 1 minute to warm. • Transfer the cups to testing channels. • Press PPP, it will appear the status <PPP> • Add 0.03 ml of agonist to bottom of cuvettes and press start key then monitor optical density changes for three minutes. • Repeat this procedure for each agonist • Curve Display. * ADP should placed in ICE.

  15. PRP Aggregometry Agonist & Patterns • ADP (at appropriate concentration) Biphasic curve: 1o and 2o waves (requires intact prostaglandin pathway) Note: if ADP is added at too low or too high concentration, it will not get biphasic response • Epinephrine Biphasic curve; requires intact prostaglandin pathway • Collagen Lag phase followed by 2o wave only

  16. Ristocetin A biphasic however, often only a single broad wave Binds to vWF/GPIb/IX complex and results in agglutination Evaluates adhesion reaction • Thrombin Biphasic curve. Irreversible aggregation only (does not require cyclooxygenase) • Arachidonic acid second wave only; assesses cyclooxygenase pathway • Serotonin A primary wave of aggregation with a maximum of 10% to 30% transmittance followed by disaggregation.

  17. Interpretation • Platelet aggregation occurs as a two-step process, known as primary and secondary waves of aggregation. • The primary wave of aggregation is observed when platelets adhere to one another in the presence of an external agent (agonist) such as adp, epinephrine, or ristocetin. • Secondary aggregation is characterized as the aggregation that occurs after the platelets have been stimulated to secrete the substances contained in their organelles. • It should be noted that some agonists will stimulate primary aggregation and some will stimulate secondary aggregation. Others will stimulate both primary and secondary aggregation, yielding a "biphasic" aggregation curve.

  18. In addition, different concentrations of the same agonist can produce varying patterns of primary and secondary aggregation. For example, • Low concentrations of ADP induce biphasic aggregation (i.e., both a primary and a secondary wave of aggregation); • Very low concentrations of ADP (l.5 ug/ml. final concentration) induce a primary wave followed by disaggregation; • And high concentrations of ADP (10 ug/ml, final concentration) induce a single, broad wave of aggregation“ • A biphasic aggregation response to ADP will not be seen in patients with platelet release disorders. • Patients with Glanzrnann's thrombasthenia show incomplete aggregation with ADP regardless of the final concentration.

  19. In patients with severe von Willebrand disease, aggregation to ristocetin is characteristically absent. Decreased to normal aggregation to ristocetin can be seen in patients with mild von Willebrand disease. Correction of the abnormal ristocetin aggregation curves can be seen by the addition of normal, platelet-poor plasma to the patient's platelet-rich plasma. • Abnormal ristocetin-induced platelet aggregation may also occur in patients with • Bernard-Soulier syndrome, • Platelet storage pool defects • Idiopathic thrombocytopenia purpura (ITP).

  20. Glanzmann Thrombasthenia • Normal PLT count, but abnormal clot retraction • Absence of secondary aggregation to ADP, epinephrine, collagen, (thrombin) • Normal response to ristocetin.

  21. Bernard-Soulier syndrome • Platelet aggregation test • Failure to aggregate in the presence of ristocetin • Aggregation by other agonists (ADP, collagen, epinephrine): normal • Response to low-dose thrombin: may be delayed Platelet storage granule defects • Dense (δ) granule defects ~ storage pool deficiency • Α granule defects ~ gray platelet syndrome • Heterogeneous group of disorders • Mild to moderate bleeding diathesis • Abnormalities in platelet aggregation

  22. Precautions Prior To Studying Platelet Aggregation • Aspirin-containing compounds should be excluded for at least 10 days prior to testing, as aspirin interferes with the release reaction. • Ingestion of other drugs known to influence platelet function should also be avoided for at least the time required for their elimination from the circulation. These include certain antihistamines, antibiotics, and anti-depressants. A check should be made of any drugs being prescribed before performing platelet function testing. • Chylomicrons can interfere with the measurement of platelet aggregation, studies should not be carried out shortly after a fatty meal. • Many other “normal” dietary constituents, including alcohol, onions, garlic, peppers, and ginger, may also inhibit platelet aggregation. • Chilling activates platelets, and so the blood is processed at 20°c –25°c.

  23. Comment • In evaluating patients with suspected platelet disorders, the aggregating agents most commonly used are ADP in varying concentrations, collagen, epinephrine, and ristocetin. • Aspirin, aspirin compounds, and anti-inflammatory drugs inhibit the secondary wave of aggregation by inhibiting the release reaction of the platelet. • The intensity of platelet aggregation may be estimated by recording the change in absorbance as a percentage of the difference in absorbance between platelet-rich and platelet-poor plasma. • This has limited usefulness because absorbance is dependent on the size and density of platelet clumping and the number of platelets that aggregate.

  24. Drugs And PLT Function • Aspirin: Acetylsalicyclic acid irreversibly inhibits cyclooxygenase • Clopidogrel : Plavix Irreversibly inhibits P2Y12 • Dipyridamole:  inhibits Thromboxanesynthase • Abciximab ReoPro  inhibits GP IIb/IIIa

More Related