Why is working from heights still a risk

1. Why is working from heights still a risk? Do you have a team that is working from heights? Then there is the need to ensure that height SWMS is taken seriously since it is a critical part of OH&S obligations. Safe Work Australia has stated that falling from heights usually accounts for a considerable percentage of fatalities at worksites, which is why you should pay more attention to some of these risks. It’s not just about protecting your staff since that’s the right thing to do. There are some penalties when you fail to focus on such responsibilities. It is in your best interest to protect your staff to avoid being penalized. For instance, a firm based in Toowoomba incurred a penalty worth $75,000 in 2017 since the workers were exposed to a level of risk that was unacceptable, and they could have fallen from heights.

2. Safety Usually Starts by Working with Heights SWMS Working at heights SWMS is mandatory for each site where you’ll have people working, and there is a risk of injuries resulting from a fall. The document should be completed for each new site since the risk profile varies from one site to the next. As a result, the risk mitigation strategies will be different. The SWMS usually outlines the equipment that is required for a site. Some of the equipment required includes visibility equipment, head protection, and harness equipment. You also need to adhere to on-site practices if you want to minimize the exposure to risks. You need to understand the work won’t stop there. The working at heights SWMS is supposed to be in the form of a document that you can refer to throughout the construction project, especially in such situations: • Subcontractor and employee toolbox talks must be undertaken to control, identify, and communicate site hazards. • Regular observations and inspections should be carried out by the person in charge of the construction site to make sure the SWMS has been complied with. • The SWMS should be accessible for review or inspection, and it should be retained until the project is complete. • Work is supposed to cease when an incident takes place. The SWMS needs to be amended after consulting with the relevant parts to make sure the incident won’t take place again. The safety measures also need to be communicated accordingly to all the workers before the project kicks off. How to Organize the Working at Heights SWMS To meet compliance obligations, there is the need to purchase the working at heights SWMS template offered by the NECA. It is in the form of a template, and the specifics are supposed to be filled in accordingly. Keep in mind the SWMS isn’t only a starting point for meeting safety obligations. When you join NECA, you gain some benefits, such as the organization’s ability to assist clients in remaining compliant regardless of their working environment.