1 / 16

Engineering Graphics

Engineering Graphics. INDEX. Introduction Scales Engineering Curves Orthographic Projection Isometric Projection Projection of Points & Lines Projection of Planes Projection of Solids Section of Solids. IN CLASS. INTRODUCTION. Types of Lines Numbering Dimensioning Types of Polygon.

samanthao
Download Presentation

Engineering Graphics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Engineering Graphics

  2. INDEX • Introduction • Scales • Engineering Curves • Orthographic Projection • Isometric Projection • Projection of Points & Lines • Projection of Planes • Projection of Solids • Section of Solids IN CLASS

  3. INTRODUCTION Types of Lines Numbering Dimensioning Types of Polygon

  4. TYPES OF LINES

  5. NUMBERING

  6. STRAIGHT LETTERS & NUMERALS • Step-1 First draw two horizontal lines of any length at the distance 10 mm apart from each other. • Step-2 Then draw vertical lines between the two horizontal lines at distance 10 mm apart form each other. • Step-3 Then write down the Capital Alphabet letters within each box in such a way that each letter of the alphabet should touch the boundary of the respective box only. Like in the same way write down full ABCD…. • Step-4 As per the procedure described above write down numerals from 1 to 0 in a new line.

  7. INCLINED LETTERS & NUMERALS • Step-1 First draw two horizontal lines of any length at the distance 10 mm apart from each other. • Step-2 Then draw vertical lines between the two horizontal lines such that each vertical line should be inclined at an angle of 75° with the horizontal line & each line should be at the distance of 10  mm apart from each other. • Step-3 Then write down the Capital Alphabet letters within each box in such a way that each letter of the alphabet should touch the boundary of the respective box only. Like in the same way write down full ABCD…. • Step-4 As per the procedure described above write down numerals from 1 to 0 in a new line.

  8. DIMENSIONING There are two types of dimensioning system: • Uni-Directional System • Aligned System

  9. In Unidirectional Method of  Dimensioning the dimension line should be cut at center and dimensions should be placed in the middle of dimension lines as shown into the figure.

  10. In Aligned Method of Dimensioning the dimension line should be continuous and dimensions should be placed in the middle of dimension lines as shown into the figure

  11. Polygon BASIC DRAWING How to draw a Polygon? • TRIANGLE • SQUARE • PENTAGON • HEXAGON • SEPTAGON • OCTAGON C 6 4 A B 30

  12. TRIANGLE C 6 4 A B 30

  13. SQUARE C 6 RADIUS O 4 A B 30

  14. PENTAGON BISECTOR C 6 5 RADIUS 4 A B 30

  15. HEXAGON C 6 RADIUS 4 A B 30

  16. OCTAGON 8 RADIUS C 6 4 A B 30

More Related