1 / 28

Development of a Multi-Residue Method for Mycotoxin Analysis in Feeds and Grains

Development of a Multi-Residue Method for Mycotoxin Analysis in Feeds and Grains. Midwest AOAC, St. Paul, MN, June 10, 2003. Introduction and background. Two basic methods can screen for or quantitate 5 classes of toxins Multi-residue method needed for convenience and increased sensitivity

samara
Download Presentation

Development of a Multi-Residue Method for Mycotoxin Analysis in Feeds and Grains

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Development of a Multi-Residue Method for Mycotoxin Analysis in Feeds and Grains Midwest AOAC, St. Paul, MN, June 10, 2003

  2. Introduction and background • Two basic methods can screen for or quantitate 5 classes of toxins • Multi-residue method needed for convenience and increased sensitivity • The ruggedness of separation and detection of the mycotoxins has been well-established • Easy to use with current post-column system • Uses a reliable and affordable sample cleanup for feeds, grains

  3. Method 1: Trichothecene (DON) Aflatoxins (incl. M1 & M2) Zearalenone Ochratoxin A Method 2: Trichothecene (DON) Aflatoxins (incl. M1 & M2) Fumonisins (FB1, FB2, FB3) 2 Methods to Analyze 5 classes of Mycotoxins

  4. Post Column Set Up • PCX 5200 with duplex pump, 2 ml reactor • Simplex pump will also be sufficient, but requires more conversion time • PCX Control software • Photochemical reactor (Needed for Aflatoxins Only) • UV detector • Fluorescence detector

  5. Flow Paths of Post-Column Systems Method 1 Method 2

  6. Maximum Levels

  7. Aflatoxin, DON, Zearalenone ACN : H2O (84:16) 100 mL Add 25 g of ground sample C18 : Alumina (1:1) Fill column with 1.5g Filter 6 mL of extract Inject Note: for increased DON response, evaporate and reconstitute in MeOH Sample Preparation and Cleanup Method 1

  8. Method 1 Conditions

  9. Method 1 Detection

  10. Standard, method 1

  11. Corn, m1

  12. Wheat, m1

  13. Pig Feed, m1

  14. Feed sample, m1

  15. Corn 2, m1

  16. Hay, m1

  17. Conclusions for Method 1 • Sample prep works well for most samples • Certain matrices have interferences with portions of the chromatogram • Good sensitivity on the detection. Can see well below recommended amounts • Method can easily match the allowed limits

  18. Sample Preparation and Cleanup, Method 2 • DON, Aflatoxins, Fumonisins • MeOH : H2O (80:20) 100 mL • Add 50 g of ground sample • C18 only • Fill column with 1.5 g • Filter 6 mL of extract • Note: No alumina – the Fumonisins stick to the alumina

  19. Method 2 Conditions

  20. Method 2 Detection

  21. Standard for Method 2

  22. Corn Sample Expanded, m2

  23. Corn Samples

  24. Feed Samples, m2

  25. Conclusions for Method 2 • Reliable extraction for Fumonisins requires more investigation • Some interferences with Aflatoxins as with Method 1 • Can easily detect below allowed limits

  26. Future work • Improve sample preparation and cleanup for Fumonisins • Examine interferences in some samples • Try reconstituting in MeOH • Investigate recoveries

  27. Acknowledgements • Nancy Thiex, South Dakota State University • Beth Tacke, North Dakota State University • Maria Ofitserova, Ph.D., Pickering Laboratories, Inc. • Darsa Siantar, Ph.D., ATTB

  28. Questions and Discussion Sareeta Nerkar & Maria Ofitserova

More Related