1 / 6

Solidworks Exercise Modeling the piston (30 minutes)

Class III. Solidworks Exercise Modeling the piston (30 minutes). • Open a new part file and Save as Piston.sldprt Create the Cylinder • Click on Top Plane (or plane 2) then open a sketch • From the origin, click and drag a circle. • Dimension the circle 20mm

sancha
Download Presentation

Solidworks Exercise Modeling the piston (30 minutes)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Class III Solidworks ExerciseModeling the piston (30 minutes) • • Open a new part file and Save as Piston.sldprt • Create the Cylinder • • Click on Top Plane (or plane 2) then open a sketch • • From the origin, click and drag a circle. • • Dimension the circle 20mm • • Click the isometric view (if isometric icon is not visible go to view, toolbars, standard view) • • Hit the Extrusion key • • In Direction 1, type 15mm, Blind • • In Direction 2, type 50mm, Blind • • Click OK and label Main cylinder 15 50

  2. Solidworks ExerciseModeling the piston (30 minutes) • Create a slot • • Click Front View • • Select Front (or plane 1) plane and open a sketch • • Select centerline tool, then draw a centerline vertically through the origin • • Select the line, then hit the Mirror tool • • Draw a half rectangle using the line tool • • Dimension the width to be 5mm. • • Hit the extruded cut tool • • Select Through All, then check Both Directions • • Click OK and label Slot 5

  3. Solidworks ExerciseModeling the piston (30 minutes) • Square off the ends • • Select Front (or plane 1) plane and open a sketch • • With Line tool, draw an L shape to the right of the origin. Start by snapping to the top edge. • • Select the bottom segment and while holding the Cntrl key down select the edge at the bottom of slot • • Right click the mouse and select … Add Relation • • Click on ‘Collinear’ and close • • Dimension the vertical line 6mm to the right of the origin • • Select the Cut tool • • Select Through All; check Both Directions. • • Note arrow showing what will be cut away, then hit OK; Label Flat face 6

  4. Solidworks ExerciseModeling the piston (30 minutes) • Mirror squared end • • Select insert, pattern/mirror, mirror feature. • • Highlight Mirror Plane box, then select Right (or plane 3) plane in the Features Manager Tree • • Highlight Features to mirror box, then select Flat face in the Features Manager Tree, then hit OK • • Leave this labeledMirror1

  5. Solidworks ExerciseModeling the piston (30 minutes) 5 • Make a hole • • Select a face on the right ‘squared end’ plane • • Open a sketch • • Draw a construction line from Origin, upwards • • Select Circle tool and place the cursor on the construction line, then drag to create any sized circle • • Dimension circle to be 5mm diameter • • Dimension distance of circle from origin to be 7.5mm • • Click extrude cut, up to surface • • Click OK and label Pin Hole 7.5

  6. Solidworks ExerciseModeling the piston (30 minutes) • Chamfer the bottom • • Turn on wireframe viewing • • Select the bottom edge • • Hit Chamfer button • • Choose Angle-Distance, 1.5mm, 45 degrees

More Related