1 / 6

BES Beam Measurements 6/24/05

BES Beam Measurements 6/24/05. R. Bravenec. Beam Signals. 7 channels in vertical array at R = 79.9 cm Bandpass filters were all tuned to the same central wavelength (660 ± 1 nm). shot 1050525022: V b = 42 kV I b,max = 5.0 A nl_04 ~ 0.64. Beam Profile, t = 0.479 s. Offset?

santos
Download Presentation

BES Beam Measurements 6/24/05

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. BES Beam Measurements6/24/05 R. Bravenec

  2. Beam Signals 7 channels in vertical array at R = 79.9 cm Bandpass filters were all tuned to the same central wavelength (660 ± 1 nm). shot 1050525022: Vb= 42 kV Ib,max= 5.0 A nl_04 ~ 0.64

  3. Beam Profile, t = 0.479 s • Offset? • Channel 4 no longer significantly larger than others. • Amplitudes factor ~2 lower than model assuming 2 A neutrals at plasma edge. Vb= 42 kV Ib= 5 A nl_04 ~ 0.64

  4. Profile Before Beam • Smooth profile -> good channel-to-channel calibration (ch. 4 a little high)

  5. Beam Signals 7 channels in vertical array at R = 79.9 cm Bandpass filters were all tuned to the same central wavelength (658.5 nm). shot 1050525022: Vb= 46.5 kV Ib,max= 4.3 A nl_04 ~ 0.55

  6. Beam Profile, t = 0.525 s • NOT Gaussian Vb= 46.5 kV Ib= 4.3 A d1/e = 13.8 cm zpeak= -0.05 cm

More Related