1 / 21

Laboratory Demo: Metal Evaporation

Laboratory Demo: Metal Evaporation. - Open evaporator. - Remove wafer holder. - This is where the wafers will be during the evaporation process. - Remove the bell jar. - Prepare metal: e. g., use metal wire. - The metal will be placed in a "basket".

sbolen
Download Presentation

Laboratory Demo: Metal Evaporation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Laboratory Demo: Metal Evaporation

  2. - Open evaporator.

  3. - Remove wafer holder.

  4. - This is where the wafers will be during the evaporation process.

  5. - Remove the bell jar.

  6. - Prepare metal: e. g., use metal wire.

  7. - The metal will be placed in a "basket".

  8. - Some evaporators use a "coil" instead of a "basket".

  9. - Both metal and basket/coil should be cleaned.

  10. - They should then be dried in the dehydration oven.

  11. - The basket/coil should be installed between the two electrodes, and the metal placed inside the basket or around the coil.

  12. - Move shutter to cover the filament.

  13. - Put on the bell jar.

  14. - Carefully load the wafers onto the wafer holder.

  15. - One of the wafers may be a "test" wafer for measuring the metal layer thickness.

  16. - Replace the wafer holder back on top of the bell jar.

  17. - Place the cover back onto the bell jar.

  18. - Lower pressure ( ~ 10-6 Torr ).

  19. - Heat the filament to evaporate the metal.

  20. - Cool and remove wafers.

  21. - The test wafer allows measurement of film thickness.

More Related