1 / 22

Australian Oilseed Quality Overview

Australian Oilseed Quality Overview. Grain Quality Forums – March/April 2014. Oilseed Quality – what the market wants. What is important to a oilseed processor?. Oil Content (High) Protein Content (High) Moisture (Low) Admixture/ foreign material (Low) Weight (kg/Hl ) (High)

shauna
Download Presentation

Australian Oilseed Quality Overview

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Australian Oilseed Quality Overview Grain Quality Forums – March/April 2014

  2. Oilseed Quality – what the market wants

  3. What is important to a oilseed processor? • Oil Content (High) • Protein Content (High) • Moisture (Low) • Admixture/ foreign material (Low) • Weight (kg/Hl) (High) • Chlorophyll (Green Seeds) (Low) • Heat Damaged Seeds (Nil) • Contaminants (Nil) • Food safety issues (eg chemical MRL’s) (Nil) • Fatty Acid Profile (Consistent)

  4. Oil content: • Generally the higher the oil content the better • however some years when the protein market is high and the oil market is low and the additional revenue from the higher oil does not cover the oil bonification payments. • Current example on Canola: Oil Bonus of around $8.50 per 1% increase in oil however the processor is only receiving about a $6.00 benefit per the extra 1% oil, hence is out of pocket $2.50. • Often low oil content seed will also have other quality problems (eg high chlorophyll caused from early swathing or with frosted seed),

  5. Moisture content: • Paying oilseed price for water isn’t desirable • Oilseed processor needs to take seed moisture down to 2-4% (depending on type of seed and processing equipment being used). • Not only is there an extra cost in the removal of the moisture but the daily plant throughput is reduced with high moisture seed (this increases the crush cost per tonne). • The higher the seed moisture the higher the risk of spoilage in storage

  6. Moisture & Oil content for safe storage:

  7. Heated seed Heated seed produces dark oil with high ffa and is like a bottle of wine that has gone off. Heated seed is generally a result of high moisture seed being put into storage. When the oil is dark (as seen in the bottle on the left) it is generally an indication of high oxidation and severe degradation of the oil quality. Heated Oil Vs Normal Oil (Both samples are crude canola)

  8. Weight • Low hectolitre weight is often a good indicator of quality problems with the seed that can’t be tested and the point of receival (eg higher “free fatty acid” level which is an indication of increased oxidation which can occur from insect damage and is often identified with low weight seed) • AOF Standards: • Canola Test Weight Min 62 kg/hl • Sunflower Test Wt Min 32 kg/hl • Soybean Test Wt Min 70 kg/hl

  9. Chlorophyll (green seed) • Green seed is high in chlorophyll and a problem for oil refiners. The markets for Canola, Sunflower and soybean oil are all after a light slightly golden coloured oil (not green). • To remove the chlorophyll additional or special bleaching clays are required which is an extra cost and the oil losses in the refinery increase greatly with high chlorophyll oil. • The AOF is currently working with NSW DPI to develop a NIR calibration for high chlorophyll canola which will be more accurate and efficient way of identifying problem loads than the old green seed test. • High Chlorophyll content is caused by plant not reaching full maturity prior to harvest or desiccation (frost, early swathing, late season drought can all be potential causes).

  10. Australian Canola Quality • Annual Quality Reporting • Independent • - Govt Laboratory • Transparent • List all major quality • attributes.

  11. 2013/14 Harvest Quality Results

  12. State by State Performance- 13/14 Protein Levels (% Seed) Oil Levels (% Seed) GlucosinolateLevels (umoles/gm)

  13. Australian Canola Oil Level Trends

  14. Australian Canola Protein Level Trends

  15. Australian Oil + Protein Level Trends

  16. Australian Quality 20 year trend

  17. Australian Canola Oil Canola Oil Quality

  18. Fatty Acid profiles- 2013/14 and Trends C18:1 (% in Oil) C18:2 (% in Oil)

  19. Fatty Acid profiles- 2013/14 and Trends C18:3 (% in Oil) Total Sats(% in Oil)

  20. Iodine Values- 2013/14 and Trends Iodine Value (% in Oil)

  21. Take home points: Australian Canola has: • Very high oil content • Very good oil + protein (and still improving) • Generally low moisture content (approx. 2% below Nth Hemisphere). • Low Chlorophyll compared to Northern Hemisphere (reduced refining costs) • Possibly a lowering of Iodine value (is this a issue or an opportunity?)

More Related