1 / 9

Thermal Design and Modeling for Infra Red Spectroscopic Imaging Survey Payload (IRSIS)

Thermal Design and Modeling for Infra Red Spectroscopic Imaging Survey Payload (IRSIS) S. L. D’Costa. Goals to be achieved. Detector temperature to be at 77 K Filter and grating temperature to be at 77 K Optic fibre coupling at 100 K Primary and Secondary mirrors to be at 100 K

sheila
Download Presentation

Thermal Design and Modeling for Infra Red Spectroscopic Imaging Survey Payload (IRSIS)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Thermal Design and Modeling for Infra Red Spectroscopic Imaging Survey Payload (IRSIS) S. L. D’Costa

  2. Goals to be achieved • Detector temperature to be at 77 K • Filter and grating temperature to be at 77 K • Optic fibre coupling at 100 K • Primary and Secondary mirrors to be at 100 K • Electronics temperature ~ 290 K

  3. Parameters involved in Thermal Modeling • Orbital Parameters • Payload geometry • Total allowed size and weight of the Payload • Configuration of optics • Placement of Electronics • Total power dissipation in the entire electronics • Materials to be used in construction

  4. Orbital Parameters Orbit : Sun synchronous Polar orbit of ~800 km. Source : Cooling Technology for Large Space Telescopes – Keith Walyus (NASA Science Technology Conference 2007) Preferred Orbit : Dawn / Dusk Sun Synchronous ~ 800 km., ~ 96 min/orbit ~ 98 degrees inclination

  5. Environmental Heat Loads Heat loads for different Sun Synchronous orbits in Watts Source : Thermal Performance of the CrIS passive cryocooler – B. Ghaffarian et al – Cryogenics 46 (2006) 158-163

  6. ISRO Launch Capability In 2001, ISRO launched PSLV-C3 with the following Satellites put into orbit 1. TES (Technology Experiment Satellite) 1108 kg. 568 km. Sun Synchronous Polar Orbit 2. PROBA (PRoject for On Board Autonomy) of Belgium, 94 kg., Elliptical orbit 568 x 638 km. 3. BIRD (Bispectral and Infrared Remote Detector of Germany, 92 kg., 568 km. SSO

  7. Payload Geometry 1. Telescope optics always pointing in the Anti – Sun direction 2. Sun Shield with multiple layers to be deployed after reaching orbit 3. Separate enclosure for Spectrometer with radiation shields and one side facing deep space 4. Detector and spectrometer components cooled by Stirling Cooler 5. Low thermal conductivity struts for mounting telescope and spectrometer on satellite deck

  8. Telescope Optics 1. Cassegrain configuration for telescope 2. High conductivity, high strength (Beryllium?) mount for secondary mirror 3. Open configuration for telescope 4. Type of baffling to be used 5. Fibre coupling to spectrometer enclosure

  9. Strategy for Thermal design • Firming up basic satellite, telescope and • orbit parameters • 2. Interacting with ISRO engineers for inputs on • thermal insulation and shield design • In-house thermal modeling using software like • Radtherm • 4. Final thermal modeling to be outsourced with • inputs from ISRO • 5. Testing strategy and facilities

More Related