1 / 84

KX-TDE/NCP New Features/Functions Ver.5 (Edition-1)

KX-TDE/NCP New Features/Functions Ver.5 (Edition-1). Panasonic System Networks CO.,LTD. “. New Features/Functions - 1. The new features/functions are available from, - KX-TDE100/200/600 MPR Ver.5. - KX-NCP500/1000 MPR Ver.5. “. New Features/Functions - 2.

siusan
Download Presentation

KX-TDE/NCP New Features/Functions Ver.5 (Edition-1)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. KX-TDE/NCP New Features/Functions Ver.5 (Edition-1) Panasonic System Networks CO.,LTD.

  2. “ New Features/Functions - 1 The new features/functions are available from, - KX-TDE100/200/600 MPR Ver.5. - KX-NCP500/1000 MPR Ver.5.

  3. “ New Features/Functions - 2 The new features/functions are available from, - KX-TDE100/200/600 MPR Ver.5. - KX-NCP500/1000 MPR Ver.5.

  4. For KX-TDE100/200 (Ver.5)only NEW SLC (MCSLC) CARDSKX-TDA1176 (MCSLC-16)KX-TDA1178 (MCSLC-24)

  5. “ KX-TDA1176 (MCSLC16) Cable Maximum Distance ø 0.4 mm: 698 m ø 0.5 mm: 1,128 m ø 0.6 mm: 1,798 m CAT 5: 1,128 m - 16 Port Single Line Telephone Ext. with Caller ID and Message Lamp Card - KX-TDE0105 (MEC card) is needed. - Standby power consumptions: 9W One SLT goes to Off-hook mode, additionally 0.35W will be consumed. - KX-TDE600 does NOT support KX-TDA1176.

  6. “ KX-TDA1178 (MCSLC24) Cable Maximum Distance ø 0.4 mm: 698 m ø 0.5 mm: 1,128 m ø 0.6 mm: 1,798 m CAT 5: 1,128 m - 24 Port Single Line Telephone Ext. with Caller ID and Message Lamp Card - KX-TDE0105 (MEC card) is needed. - Standby power consumptions: 11W One SLT goes to Off-hook mode, additionally 0.35W will be consumed. - KX-TDE600 does NOT support KX-TDA1178.

  7. “ KX-TDA1176/1178 (MCSLC16/24) Maximum SLT capacity of KX-TDE100/200 is as follows.

  8. Ver.5 KX-NCP500 CAPACITY EXPANSION

  9. “ NCP500 Capacity Expansion The current NCP500 hardware with Ver.5 software can support the below specification. NCP500 Ver.5 *) 2 x DLC16 or SLC16 Required = Cannot use OPB3 (& Doorphone card)

  10. “ NCP500 Capacity Expansion The current NCP500 hardware with Ver.5 software can support the below specification. NCP500 Ver.5

  11. Ver.5 MAXIMUM ICD-G QUEUING : 30→100

  12. “ Maximum ICD-G Queuing : 30 → 100 Before Ver.5 (Max. 30) ICD-G 600 Queuing Table Max. 30 CO TDE/NCP Ver.5 (Max. 100) ICD-G 600 Queuing Table Max. 100 CO No Optional Programming Default : 30

  13. Ver.5 CALLER CAN EXIT FROM ICD-G QUEUING

  14. “ Caller can exit from ICD-G Queuing Before Ver.5 Once an external call goes into an ICD-G queuing table, the caller has only two options, wait for the call to be answered by the ICD-G agent or disconnect the line Cycles forever External call OGM-1: Welcome to Panasonic….. OGM-2: Please wait for the moment. The user wants to exit from the queuing and leave a message in the mail box. Customer Request function External call

  15. “ Caller can exit from ICD-G Queuing TDE/NCP Ver.5 The ICD-G Queuing OGM performs not only sending OGM but also DISA AA service. When the caller is listening the OGM, the caller can exit to an extension specified by AA. No AA Service - Only AA is available (not DISA - dial extension number). - During the caller is listening the BGM/MOH (wait period), the DISA AA function does not work. Dial “2” Ext.202 Dial “1” Ext.201 Dial “0” Ext.500

  16. “ Caller can exit from ICD-G Queuing TDE/NCP Ver.5 + If a VM is connected to the PBX If a system has a VM and an ICD-G has a VM mail box, the caller has three options, wait for the call to be answered by the ICD-G agent, disconnect the line or leave a message to a mail box. ICD-G: 601 DISA 502: Dial 0 → 500 VM Group:500 Mail Box: 601

  17. “ Caller can exit from ICD-G Queuing TDE/NCP Ver.5 + If a VM is connected to the PBX VM Mail Box 601 Dial “0” External call OGM-1: Welcome to Panasonic….. OGM-2: Please wait for the moment. Or dial “0” to leave voice message. Add Message

  18. “ Caller can exit from ICD-G Queuing TDE/NCP Ver.5 + If a VM is connected to the PBX • VM custom service is also available VM Custom Service Dial “0” External call ICD-G: 601 Program Point DISA 502: Dial 0 → 500 Select VM Group:500 Custom Service

  19. “ Caller can exit from ICD-G Queuing Limitation Only when the caller is listening the OGM (OGM-2), the caller can exit to the extension specified by AA. When the caller is listening the BGM/MOH (wait period), the OGM-2 DISA AA function does not work. Exit Dial Dial Counter Idea Change wait period to OGM-3 (OGM-3 records MOH/BGM)

  20. “ Caller can exit from ICD-G Queuing TDE/NCP Ver.5 Technical Condition - VM has to be KX-TVA/TVM using Digital (PT) integration. VM Group D-PT integration - VM in other PBX (Centralized VM) can NOT be DISA-AA destination. VM Group: 500 DISA 502: Dial 0 → 500 Centralized VM

  21. “ Caller can exit from ICD-G Queuing If Customer wants to use ESVM for recording message? ESVM floating extension number can be assigned in the DISA AA destination. 1.External call ICD-G: 601 Ext.2001 DISA 502: Dial 0 → 599 2. Dial 0 ESVM box ESVM:599 Ext.2002 3. Go to Ext.2001 SVM The SVM of 1st ICD-G member will answer after the caller is dialing digit 0. Ext.2003 - Ext.2001 has to have SVM box. - A setup of C-FWD to SVM on Ext.2001 is unnecessary.

  22. Ver. 5 AUTOMATIC START 2-WAY RECORDING

  23. “ Automatic start 2-way Recording TDE/NCP Ver.5 Ext.2001 2- Answer 1- Call to Ext.2001 Three party conference CO 3- 2-way Recording 1- Call to Ext.2001 2- Ext.2001 answers the call. 3- The PBX starts 2 way recording automatically. Before Ver.5 1- Call to Ext.2001 2- Ext.2001 answers the call. 3- Press “2-way recording” button to starts 2 way recording.

  24. “ Automatic start 2-way Recording TDE/NCP Ver.5 (New Program Item) Once it is programmed it will always start automatically “2-way recording”. A manual start cannot be performed. Automatic Recording Manual Recording Condition - PT(IP/Digital/Analog), PS and SLT can use the function. - SIP Phone can NOT use the function. - Internal call/External call/ICD-G call is automatically recorded. - Incoming call/Outgoing call is automatically recorded. - We cannot change the above-mentioned conditions (E.g. Only external incoming call is automatically recorded) - Programming “2-way recording” button is not necessary. If you program a 2-way recording button, it can be used to stop and then re-start 2-Way recording" .

  25. “ Automatic start 2-way Recording Technical Specifications The Max. number of simultaneous recordings • A maximum of 10 calls can be recorded to VM for NCP and TDE100/200 at the same time (PBX supports 10 x 3 conference) • A maximum of 24 calls can be recorded to one VM for TDE600, because one VM supports 24ch. • A maximum of 40 calls can be recorded to two or more VM for TDE600, because TDE600 supports10 x 3 conference hardware per cabinet. • VM has to be KX-TVA/TVM using Digital (PT) integration. • VM DTMF integration does NOT support automatic recording. • - Centralized voice mail does NOT support automatic recording. • - E-SVM card cannot be used this function.

  26. “ Automatic start 2-way Recording TDE/NCP Ver.5 Ext.2001 It is also possible to record all the conversation to one mail box. E.g. Ext.1001 (Manager) has a mail box 201. Ext.2001, Ext2002 (Operator) conversation can be recorded on the mail box 201. Only Ext.1001 can listen to the recorded message. All operator conversation Ext.2002 Mail Box Ext. No 201 1001 Ext.1001 Manager Programming Point

  27. Ver. 5 EMERGENCY ALERT （SMDR)

  28. “ Emergency Alert （SMDR) TDE/NCP Ver.5 If a dialed number is matched with the “Emergency Dial” table, when dialing is completed, the extension number is outputted to SMDR (1st SDMR). Also, after finishing the call, this extension number is outputted to SMDR (2nd SMDR). Ext.2001 Emergency Call CO “Emergency Dial” table SDMR (RS232C/LAN) Ver.5 New Before Ver.5 After finishing the call, this extension number is outputted to SMDR, only.

  29. “ Emergency Alert （SMDR) Related Programming Default Ver.4 function Option Ver.5 function

  30. “ Emergency Alert （SMDR) Ext.2001 Emergency Call CO CA Call Account “Emergency Dial” table SDMR (RS232C/LAN) If the CA call account software is installed a PC, we can see an Emergency call alert by a popup window after the dial is completed. - Version up is NOT required for CA Call Accounting software.

  31. Ver. 5 CONFERENCE GROUP WITH AUTO-ANSWER FUNCTION

  32. “ Conference Group with Auto-Answer Before Ver.5 Conference Group No.1 Ext.2001 Ext.2002 Ext.2003 2. Call 1.Dial *321# Auto-Answer=ON Have to Ext.1001 4. Paging 3. Speaker automatically ON • Ext.1001 holds a conference (*321#) • 2. The PBX calls pre-programmed DECT-PS • 3. All DECT PS on the conference group automatically answer. • Speaker phone automatically “ON”. • 4. Ext.1001 user can page. • Condition: All PS has to set “Auto-Answer” = ON. Auto Answer setting is a necessity!!!

  33. “ Conference Group with Auto-Answer TDE/NCP Ver.5 Conference Group No.1 Ext.2001 Ext.2002 Ext.2003 2. Call 1.Dial *321# Ext.1001 Regardless of “Auto Answer” = ON/OFF 4. Paging 3. Speaker automatically ON • Ext.1001 holds a conference (*321#) • 2. The PBX calls pre-programmed DECT-PS • 3. All DECT PS on the conference group automatically answer. • Speaker phone automatically “ON”. • 4. Ext.1001 user can page. • Condition: System programming is required. Auto Answer setting is not a necessity!!!

  34. “ Conference Group with Auto-Answer New Program Item and Functionality Please set “Enable”

  35. “ Conference Group with Auto-Answer TDE/NCP Ver.5 Conference Group No.1 Ext.2001 Ext.2002 Ext.2003 2. Call 1.Dial *321# Ext.1001 4. Paging 5. Press any keys 3. Speaker automatically ON • Ext.1001 holds a conference (*321#) • 2. The PBX calls pre-programmed DECT-PS • 3. All DECT PS on the conference group automatically answer. • Speaker phone automatically “ON”. • 4. Ext.1001 user can page. • 5. An answer (DECT-PS) is possible by pressing any keys. • Condition: System programming is required.

  36. “ Conference Group with Auto-Answer New Program Item and Functionality Please set “Enable”

  37. “ Conference Group with Auto-Answer TDE/NCP Ver.5 Conference Group No.1 Ext.2001 Ext.2002 Ext.2003 2. Call 1.Dial *321# Ext.1001 Regardless of “Auto Answer” = ON/OFF 4. Paging 3. Speaker automatically ON • Ext.1001 holds a conference (*321#) • 2. The PBX calls pre-programmed D-PT • 3. All D-PT’s on the conference group automatically answer. • Speaker phone automatically “ON”. • 4. Ext.1001 user can page. This function also works on a D-PT.

  38. Ver. 5 ONE TOUCH BUSY OVERRIDE

  39. “ One Touch Busy Override Ext.2001 Before Ver.5 1- Talking CO Ext.2002 1- Ext.2001 is talking to an external person on SCO-1. 2- Ext.2002 press the SCO-1 button → Busy Tone 3- Ext.2002 press “3” or “OVER” for overriding the call. Ver.5 (System option = ON) 1- Ext.2001 is talking to an external person on SCO-1. 2- Ext.2002 press the SCO-1 button → Overriding the call. New Program Item Default : Disable

  40. Ver. 5 TENANT BASED ARS

  41. “ Tenant based ARS Before Ver.5 ARS function All ARS reading tables are all for tenants, Customer Request function (Sample) One PBX is shared with two or more companies. The companies have a contract with different telephone carriers. Japanese company has to use KDDI for international call. → Dial +1 (USA call) → KDDI Line UK company has to use BT for international call. → Dial +1 (USA call) → BT Line Tenant-A Japanese Company Customer needs tenant base ARS reading table. International call Provider :KDDI KDDI BT Tenant-B UK Company International call Provider :BT

  42. “ Tenant based ARS TDE/NCP Ver.5 TDE-NCP version 5 supports tenant independent ARS table. Tenant Base If the tenant ARS mode is selected to “Enable”,

  43. “ Tenant based ARS TDE/NCP Ver.5 If the tenant ARS mode is selected to “Same as System Setting”, the PBX checks “8-1 System Setting”, applied ARS Leading Digits Table is as follows.

  44. Ver. 5 IMPROVES SERVICE OUT FUNCTION

  45. “ Improves Service Out Function Before Ver.5 Service Out status “Extension dial lock” and “DND” are assigned automatically by “Service Out” operation. Therefore other users can see the call log and listen to the SVM message. TDE/NCP Ver.5 Service Out status “Extension dial lock”, “DND” and “Display Lock” are assigned automatically by “Service Out” operation. “Extension dial lock” : Ver.4/5 “DND” : Ver.4/5 “Display Lock” : Ver.5 Other user cannot see call log and cannot listen to SVM message. Need the extension PIN

  46. “ Improves Service Out Function How to un-lock NB: Input an extension PIN (Default: Blank) before use this function.

  47. Ver. 5 CLIP WHEN VM TRANSFER

  48. “ CLIP when VM Transfer Before Ver.5 When a VM transfers a CO call to a remote extension, The CLIP information form the VM is depend upon the system programming. PBX-1 PBX-2 CO VoIP-Net 2. Transfer 1. Call Ext.2001 System Programming 2.9 System Options → Option 4 Ext.1001 CLIP:4771111 CLIP:4771111 VM Ext. Number Centralized VM Note: Ext.1001 (Local extension) receives always CLIP: 4771111, regardless of programming.

  49. “ CLIP when VM Transfer TDE/NCP Ver.5 The remote extension receives always the CO CLIP, regardless of the system programming. PBX-1 PBX-2 CO VoIP-Net 2. Transfer 1. Call Ext.2001 System Programming 2.9 System Options → Option 4 Ext.1001 CLIP:4771111 CLIP:4771111 CLIP:4771111 Centralized VM

  50. “ CLIP when VM Transfer TDE/NCP Ver.5 If a customer likes the previous function, please change the option bit 0C-5 to “Enable” Option Bit: 0C-5 0C-5=Disable: TDE/NCP Ver.5 (Default) 0C-5=Enable: Before TDE/NCP Ver.5

More Related