1 / 51

KX-TDE/NCP New Features/Functions Ver.6 (Edition-1.0)

KX-TDE/NCP New Features/Functions Ver.6 (Edition-1.0). Panasonic System Networks CO.,LTD. “. New Features/Functions - 1. The new features/functions are available from, - KX-TDE100/200/600 MPR Ver.6. - KX-NCP500/1000 MPR Ver.6. For KX-TDE600 (Ver.6) only.

mahsa
Download Presentation

KX-TDE/NCP New Features/Functions Ver.6 (Edition-1.0)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. KX-TDE/NCP New Features/Functions Ver.6 (Edition-1.0) Panasonic System Networks CO.,LTD.

  2. “ New Features/Functions - 1 The new features/functions are available from, - KX-TDE100/200/600 MPR Ver.6. - KX-NCP500/1000 MPR Ver.6.

  3. For KX-TDE600(Ver.6) only NEW SLC (EMSLC) CARDSKX-TDA6179 (EMSLC-24)

  4. “ KX-TDA6179 (EMSLC24) 24-port SLT card with Message waiting and Caller ID Card - KX-TDA100/200/600, TDE100/200, NCP does NOT support KX-TDA6179. Cable Maximum Distance ø 0.4 mm: 698 m ø 0.5 mm: 1,128 m ø 0.6 mm: 1,798 m CAT 5: 1,128 m - Standby power consumptions: 2W One SLT goes to Off-hook mode, additionally 1.1W will be consumed.

  5. “ KX-TDA6179 (EMSLC24) SLT card combination for TDE600 with PSU-L <Conditions>- PSU-L is required for KX-TDA6179. (Same as KX-TDA6178)- MEC card is NOT required for KX-TDA6179. (Same as KX-TDA6178)- 4 PFT (Power Failure Transfer) ports are supported. (Same as TDA6178)- Message waiting specification is same as KX-TDA1178/1176 card.- Caller ID specification is same as KX-TDA1178/1176 card.

  6. Ver.6 Overflow when All Logout

  7. “ Overflow when All Logout Incoming call ICD-G 601 Member:Ext.1001and Ext.1002 Queuing Time Table: Table-1 Table-1: OGM-1 → Wait-5 → OVF Busy-OVF: Ext.2001 CO Over flow function before Ver.6 - Ext.1001 and Ext.1002 are logged out from ICD-G 601 - An incoming call to ICD-G 601 → The call is queued in the time table-1 (OGM-1 → Wait-5 → Ext.2001) But, a customer wants to have the immediate over flow (OVF) function. Over flow function Ver.6 - Ext.1001 and Ext.1002 are logged out from ICD-G 601 - An incoming call to ICD-G 601 → The call is overflowed to Ext.2001 immediately.

  8. “ Overflow when All Logout Related Program Item New Program Option Ver.6 function (Default) Ver.5 function

  9. “ Overflow when All Logout Related Operation

  10. Ver.6 Automatic Log-out for Last agent

  11. “ Automatic Log-out for Last agent Incoming call ICD-G 601 (UCD or Priority ) Member: Ext.1001 and Ext.1002 Queuing Time Table: Programed Busy-OVF: Ext.2001 CO Automatic Log-out for last agentfunction before Ver.5 - Ext.1001 is logged out from ICD-G 601 (UCD or Priority) - An incoming call to ICD-G 601 → The call is queued in the time table-1 - Ext.1002 does not answer, → But, the automatic Log-out function does not operate for the last agent. Automatic Log-out for last agent function Ver.6 - Ext.1001 is logged out from ICD-G 601 (UCD or Priority) - An incoming call to ICD-G 601 → The call is queued in the time table-1 - Ext.1002 does not answer, → The automatic Log-out function operates for the last agent. This function does not work to Ring ICD-Group.

  12. “ Automatic Log-out for Last agent Related Program Items This option is the same as Ver.5.

  13. “ Automatic Log-out for Last agent Reserve Bit Function (0F-6) Default (Disable) 0F-6=Disable (Default) The automatic logout function operates to the last agent. Ver.6 new operation. 0F-6=Enable The automatic logout function does not operate to the last agent. Ver.5 operation.

  14. Ver.6 The caller's Information by the DSS button

  15. “ The caller's Information by the DSS button The customerrequest function Incoming call Ringing Ext.1001 Boss Ext.1002 Secretary Who is calling ? - A call arrives at Ext.1001. - Ext.1002 want to see who is calling Ext.1001, before picking up the call.

  16. “ The caller's Information by the DSS button A solution by improved DSS function 1-Assigning the Ext.1001 DSS button on Ext.1002 Ext.1001 Ext.1001 Ext.1002 DSSButton Ver.6NewOption 2- Select “Enable” Ver.6NewOption

  17. “ The caller's Information by the DSS button Operation Sequence Panasonic OCS 4771234 Line 012: 1. Incoming call Ext.1001 (Ringing) 2. Flashing the DSS button Caller 4771234 Ext.1002 Ext. 1001 3. Press the DSS button You can pick up the call. 4. The PBX sends “Busy Tone” Ext.1002 LCD 6. Press the DSS button again Panasonic OCS 4771234 5. We can see who the calleris If you want to pickup the call.

  18. “ The caller's Information by the DSS button Operation Condition

  19. “ The caller's Information by the DSS button Condition Display (3/6 line LCD D/IP-PT) Panasonic OCS 04771234 Panasonic OCS 4771234 Line 012: Incoming call Ext.1001 (Ringing) Caller 4771234 Panasonic OCS 4771234 3 Line LCD 6 Line LCD

  20. “ The caller's Information by the DSS button Condition Display (3/6 line LCD D/IP-PT) No Entry 4771234 Line 012: Incoming call Ext.1001 (Ringing) Caller 4771234 4771234 > 1001: Busy 3 Line LCD 6 Line LCD

  21. “ The caller's Information by the DSS button Condition Display (1 line LCD D/IP-PT and DECT-PS) Panasonic OCS 04771234 Panasonic OCS 4771234 Line 012: Incoming call Ext.1001 (Ringing) Caller 4771234 Panasonic OCS 1 Line LCD D-PT DECT-PS

  22. “ The caller's Information by the DSS button Condition Display (1 line LCD D/IP-PT and DECT-PS) No Entry 4771234 Line 012: Incoming call Ext.1001 (Ringing) Caller 4771234 4771234 1 Line LCD D-PT DECT-PS

  23. “ The caller's Information by the DSS button How about internal calls ??? 1002:Tanaka Ext.1001 (Ringing) Internal call Ext.1002(Tanaka) Ext.1003 1. Press the DSS button Ext. 1001 1002:Tanaka >1001:Busy 2. Press the DSS button again to pick up the call

  24. “ The caller's Information by the DSS button Other function by improved DSS Line 12: 0:01:20 Panasonic OCS 4771234 Talking Ext.1001 Caller 4771234 Ext.1002 Ext. 1001 1. Press the DSS button Who is the other end ? 2. The PBX sends “Busy Tone” Ext.1002 LCD 3. We can see who is the other end. Panasonic OCS 4771234 OVER C.BCK Additional Operation is available.

  25. “ The caller's Information by the DSS button Other function by improved DSS 1002:Tanaka Ext.1001 Talking Ext.1002(Tanaka) Who else is talking ? Ext.1003 1. Press the DSS button Ext. 1001 1002:Tanaka >1001:Busy 2. We can see the other end extension.

  26. “ The caller's Information by the DSS button Reserve Bit Function (0F-7) 0F-7=Disable (Default) Default (Disable) Ver.6 (Improved function) 0F-7=Enable Pick-Up a call function by DSS Monitor a call function by DSS Incoming Talking Caller Caller Possible Not Possible

  27. Ver.6 Trunk Group Access Priority

  28. “ Trunk Group Access Priority The customerrequest function Sales Group (Tenant-1) CO access TRG-01 (Priority for Sales) TRG-02 (Priority for Support) Support Group (Tenant-2) TRG-03 (Back up) Trunk Group Access Priority

  29. “ Trunk Group Access Priority The customerrequest function Sample TRG-01(Free) TRG-02(Free) TRG-03(Free) Tenant-1 TRG-01(AllBusy) TRG-02(Free) TRG-03(Free) Tenant-1 TRG-01(AllBusy) TRG-02(Free) TRG-03(AllBusy) Tenant-1

  30. “ Trunk Group Access Priority The customerrequest function Sample TRG-01(Free) TRG-02(Free) TRG-03(Free) Tenant-2 TRG-01(Free) TRG-02(All Busy) TRG-03(Free) Tenant-2 TRG-01(Free) TRG-02(All Busy) TRG-03(AllBusy) Tenant-2

  31. “ Trunk Group Access Priority Program Steps Enable the ARS mode for every tenantdescribed below;

  32. “ Trunk Group Access Priority Program Steps Choose the adapted TRG New Program Option Make priority order Tenant-1 Tenant-2 We can choose four TRG orders.

  33. “ Trunk Group Access Priority Order Condition (What is Priority 5?) TRG Selection Order Result TRG 1~64 tabs kept as 5th priority and up.

  34. Ver.6 Extended extension numbering plan

  35. “ Extended extension numbering plan Ver.5Extension numbering plan This extension numbering is not possible. Ext.1 Ext.10~19 Ext.100~199 Ext.1000~1099

  36. “ Extended extension numbering plan Customer request extension numbering plan 1- Hotel guest room No. = Extension No. 2- Floor umber + room No = Extension No. 10th floor Ext.101~109 1st floor Ext.11~19

  37. “ Extended extension numbering plan Reserve Bit Function (0E-2) Default (Disable) 0E-2=Disable (Default) Ver.5 Extension numbering plan 0E-2=Enable Duplicate Extension Numbering is possible. Possible

  38. “ Extended extension numbering plan How to fix a dialed number(When 0E-2=Enable) Default:10sec Recommendation:4~6 sec. When0E-2 : Enable Dial Extension number? YES Extension Inter-digit Timer is end ? YES No No Additional dial ? YES No Leading number + (Max) Additional Digits? or dial # ? YES YES Fix dialed number

  39. “ Extended extension numbering plan Reserve Bit Function (0E-3) How to fix a dialed numbercall from CTI (When 0E-2=Enable) Default (Disable) Ext.10 0E-3=Disable (Default) Fix a dialed number when PBX receives make call 0E-3=Enable Ext.101 Wait the Ext-Inter-Digit timer CTI Application Ext.10 or Ext. 10xx? CTI Make call 10 Ext.1001

  40. “ Extended extension numbering plan Reserve Bit Function (0E-5) From TDE/NCP V6.00 If “Enable” Default (Disable) Default (Disable) Default (Disable) How to fix a functional access code dialed number (When 0E-2=Enable) 0E-5=Disable (Default) We dial *783+Extension number, The dialed number will be fixed by the Ext-Inter-Digit timer or press #. 0E-5=Enable Press # only Related functional access code are, 　*48 Wireless XDP Parallel Mode Set / Cancel 　*710 FWD/DND Set / Cancel : Call from CO & Extension 　*711 FWD/DND Set / Cancel : Call from CO 　*712 FWD/DND Set / Cancel : Call from Extension 　*782 Remote Extension Dial Lock Off (unlock) 　*783 Remote Extension Dial Lock On (lock)

  41. Ver.6 ARS Carrier Increase KX-TDE100/200, NCP500/1000

  42. “ ARS Carrier Increase KX-TDE100/200, KX-NCP500/1000 ARS carrier Ver.5: 10 Carriers Ver.6: 48 Carriers

  43. Ver.6 Intercept to VM Improvement

  44. “ Intercept to VM Improvement If a PBX has one D-PT (2-ch) VM integration ? 1-Incoming call is answered by VM. Ext.1001 IRNA to VM and set DND CO 3- Ver.5: VM sends “Sorry no one is available for the call.”Ver.6: The call goes to the Ext.1001 mail box. Caller One D-PT (2-ch) 2-The call is transferred to Ext.1001 VM The customer expects that the call will go to the Ext.1001 mailbox

  45. “ Intercept to VM Improvement Reserve Bit Function (0F-5) Default (Disable) 0F-5=Disable (Default) Ver.6 (Improved function) 0F-5=Enable Ver.5 function

  46. Ver.6 H.323 Improvement

  47. “ H.323 Improvement (H.323 Support for “Tech-Prefix”) TDE/NCP V6.0 supports Cisco Gatekeeper Tech-Prefix (H.323 optional feature) Tech Prefix: #5, #6, #7 Tech Prefix: #1, #2, #3 Zone-A（Prefix：221） Zone-C（Prefix：241） Tech Prefix: #3 Tech Prefix: #5 Tech Prefix: #2 Zone-B（Prefix：231） Tech Prefix: #1 PSTN #7+241-477-2110 Tech Prefix: #6 Tech Prefix: #5 • CISCO - Technology Prefixes - Background • “A technology prefix is an optional H.323 standard-based feature, supported by Cisco gateways and gatekeepers, that enables more flexibility in call routing within an H.323 VoIP network. The Cisco gatekeeper uses technology prefixes to group endpoints of the same type together. Technology prefixes can also be used to identify a type, class, or pool of gateways. • Cisco gatekeepers use technology prefixes to route calls when there is no E.164 addresses registered (by a gateway) that matches the called number. In fact, this is a common scenario because most Cisco IOS gateways only register their H.323 ID (unless they have Foreign Exchange Station (FXS) ports configured). • Without E.164 addresses registered, the Cisco gatekeeper relies on two options to make the call routing decision: • With the Technology Prefix Matches option, the Cisco gatekeeper uses the technology prefix appended in the called number to select the destination gateway or zone. • With the Default Technology Prefixes option, the Cisco gatekeeper assigns default gateway(s) for routing unresolved call addresses. This assignment is based on the gateways' registered technology prefix. “

  48. “ H.323 Improvement (H.323 Support for “Tech-Prefix”) Reserve Bit Function (0E-1) Default (Disable) 0E-1=Disable (Default) Ver.5 0E-1=Enable Ver.6 function ((H.323 Support for “Tech-Prefix”)

  49. “ PCMC for KX-TDE/NCP Ver.6. Please use U-PCMC Ver. 7.4.x.x KX-TDE600 Ver. 7.4.x.x or later KX-NCP500/1000 Ver. 7.4.x.x or later KX-TDE100/200 Ver. 7.4.x.x or later

  50. Thank You Very Much For Your Attention

More Related