1 / 9

Use of 80/20 Products in Robot Building

Use of 80/20 Products in Robot Building. T-Slotted Extrusions and Quickframe. http://www.youtube.com/watch?v=50SEmXDh6Bw&eurl=http://www.8020.net/Default.asp. T10 Series Extrusion (1010). 1”square, sold primarily in 8’ lengths Uses 80/20’s 6105-T5 alloy to achieve:

skyla
Download Presentation

Use of 80/20 Products in Robot Building

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Use of 80/20 Products in Robot Building T-Slotted Extrusions and Quickframe

  2. http://www.youtube.com/watch?v=50SEmXDh6Bw&eurl=http://www.8020.net/Default.asphttp://www.youtube.com/watch?v=50SEmXDh6Bw&eurl=http://www.8020.net/Default.asp

  3. T10 Series Extrusion (1010) • 1”square, sold primarily in 8’ lengths • Uses 80/20’s 6105-T5 alloy to achieve: • Yield strength of 35,000 lbs/sq. in • Tensile strength of 38,000 lbs/sq. in • Superb straightness and very low twist, even at 20 ft lengths. • Weight – ½ lb/ft. • Vibration proof – locks nuts in, making it virtually impossible to vibrate loose. • Modular T-slot system allows fast and strong assembly.

  4. T-Nut (3382, 3280, 3287) • Available in stainless steel, hardened high-carbon steel, and zinc plated steel. • Compatible with T10 and T15 series extrusion. • ¼-20 Thread size. • Strong, sturdy, and easy to use. Slides inside T-slot. • Double, triple, and custom hole t-nuts available.

  5. Drop-In T-nuts (3376) • Add T-nuts, and other components to an extrusion when ends cannot be accessed. • Rubber nub holds nut in to slot, and provides a handle for removal. • Available in all materials as T-nut.

  6. Anchor Fasteners (3395) • For making 90o angles. • Zinc casting with lacquer finish. • Incredibly strong, single anchor holds 500 lbs of direct force, and 250 lbs of cantilevered force. • Strongest type of fastener 80/20 sells. • Requires drilling of counterbore, 9/16in

  7. Joining Plates (4115, 4136, 4141) • Precision machined from anodized 6105-T5 alloy. • Strong, lightweight, requires virtually no machining. • Easy to assemble and use very precisely. • 1540 uses 3 main types: 4 hole corner (4115) holds 325lbs, 75lbs, gusseted 4 hole (4136) holds 325lbs, 220lbs, and 4 hole tee joining plate (4141).

  8. Quickframe Extrusion (9000) • 1” square • Made from Anodized 6105-T5 • Very Lightweight, ¼ lb/ft • Interior is grooved for superior hold to nylon connectors.

  9. Quickframe Nylon Connectors (Various model numbers) • 2, 3, 4, and 5 way nylon connectors • End caps • Conversion tee to convert to T10 extrusion. • An enormous selection of strong and lightweight connectors for every application.

More Related